e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of May 26, 2020

Title 16Chapter IISubchapter BPart 1221 → §1221.2


Title 16: Commercial Practices
PART 1221—SAFETY STANDARD FOR PLAY YARDS


§1221.2   Requirements for play yards.

(a) Except as provided in paragraph (b) of this section, each play yard must comply with all applicable provisions of ASTM F406-19, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, approved on March 15, 2019. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of this ASTM standard from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959; www.astm.org. You may inspect a copy at the Division of the Secretariat, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

(b) Comply with the ASTM F406-19 standard with the following exclusions:

(1) Do not comply with section 5.17 of ASTM F406-19.

(2) Do not comply with section 5.20 of ASTM F406-19.

(3) Do not comply with section 6, Performance Requirements for Rigid Sided Products, of ASTM F406-19.

(4) Do not comply with sections 8.1 through 8.10.5 of ASTM F406-19.

(5) Instead of complying with section 9.4.2.10 of ASTM F406-19, comply only with the following:

(i) 9.4.2.10 For products that have a separate mattress that is not permanently fixed in place: Use ONLY mattress/pad provided by manufacturer.

(ii) [Reserved]

(6) Do not comply with section 10.1.1.1 of ASTM F406-19.

[84 FR 56689, Oct. 23, 2019]

Need assistance?