e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of February 26, 2020

Title 10Chapter IISubchapter DPart 429Subpart B → §429.49


Title 10: Energy
PART 429—CERTIFICATION, COMPLIANCE, AND ENFORCEMENT FOR CONSUMER PRODUCTS AND COMMERCIAL AND INDUSTRIAL EQUIPMENT
Subpart B—Certification


§429.49   Traffic signal modules and pedestrian modules.

(a) Sampling plan for selection of units for testing. (1) The requirements of §429.11 are applicable to traffic signal modules and pedestrian modules; and

(2) For each basic model of traffic signal module or pedestrian module selected for testing, a sample of sufficient size shall be randomly selected and tested to ensure that—

(i) Any represented value of estimated maximum and nominal wattage or other measure of energy consumption of a basic model for which consumers would favor lower values shall be greater than or equal to the higher of:

(A) The mean of the sample, where:

eCFR graphic er07mr11.118.gif

View or download PDF

Or,

(B) The upper 95 percent confidence limit (UCL) of the true mean divided by 1.10, where:

eCFR graphic er02my11.082.gif

View or download PDF

and

(ii) Any represented value of the energy efficiency or other measure of energy consumption of a basic model for which consumers would favor higher values shall be less than or equal to the lower of:

(A) The mean of the sample, where:

eCFR graphic er07mr11.120.gif

View or download PDF

Or,

(B) The lower 95 percent confidence limit (LCL) of the true mean divided by 0.90, where:

eCFR graphic er02my11.083.gif

View or download PDF

(b) Certification reports. (1) The requirements of §429.12 are applicable to traffic signal modules and pedestrian modules; and

(2) Pursuant to §429.12(b)(13), a certification report shall include the following public product-specific information: The maximum wattage at 74 degrees Celsius (°C) in watts (W), the nominal wattage at 25 degrees Celsius (°C) in watts (W), and the signal type.

[76 FR 12451, Mar. 7, 2011; 76 FR 24778, May 2, 2011]

Need assistance?