Electronic Code of Federal Regulations
|
e-CFR data is current as of July 9, 2020 |
Title 16 → Chapter II → Subchapter B → Part 1223 |
Title 16: Commercial Practices
PART 1223—SAFETY STANDARD FOR INFANT SWINGS
Contents
§1223.1 Scope.
§1223.2 Requirements for infant swings.
Authority: The Consumer Product Safety Improvement Act of 2008, Pub. L. 110-314, Sec. 104, 122 Stat. 3016 (August 14, 2008); section 3 of Pub. L. 112-28, 125 Stat. 273 (August 12, 2011).
Source: 77 FR 66713, Nov. 7, 2012, unless otherwise noted.
Back to Top§1223.1 Scope.
This part establishes a consumer product safety standard for infant swings.
§1223.2 Requirements for infant swings.
Each infant swing shall comply with all applicable provisions of ASTM F2088-13, Standard Consumer Safety Specification for Infant Swings, approved on January 15, 2013. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from ASTM International, 100 Barr Harbor Drive, PO Box 0700, West Conshohocken, PA 19428; telephone 610-832-9585; www.astm.org. You may inspect a copy at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal__register/code__of__federal__regulations/ibr__locations.html.
[78 FR 37709, June 24, 2013]