Electronic Code of Federal Regulations
|
e-CFR data is current as of July 9, 2020 |
Title 16 → Chapter II → Subchapter B → Part 1216 |
Title 16: Commercial Practices
PART 1216—SAFETY STANDARD FOR INFANT WALKERS
Contents
§1216.1 Scope.
§1216.2 Requirements for infant walkers.
Authority: The Consumer Product Safety Improvement Act of 2008, Pub. L. 110-314, Sec. 104, 122 Stat. 3016 (August 14, 2008); section 3 of Pub. L. 112-28, 125 Stat. 273 (August 12, 2011).
Source: 75 FR 35273, June 21, 2010, unless otherwise noted.
Back to Top§1216.1 Scope.
This part 1216 establishes a consumer product safety standard for infant walkers manufactured or imported on or after December 21, 2010.
§1216.2 Requirements for infant walkers.
Each infant walker shall comply with all applicable provisions of ASTM F977-12, Standard Consumer Safety Specification for Infant Walkers, approved on May 1, 2012. The Director of the Federal Register approves the incorporation by reference listed in this section in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of these ASTM standards from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 USA, telephone: 610-832-9585; http://www.astm.org/. You may inspect copies at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal__register/code__of__federal__regulations/ibr__locations.html.
[78 FR 37709, June 24, 2013]