e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 5, 2019

Title 40Chapter ISubchapter CPart 63Subpart SSSSS → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart SSSSS—National Emission Standards for Hazardous Air Pollutants for Refractory Products Manufacturing


Table 6 to Subpart SSSSS of Part 63—Initial Compliance With Work Practice Standards

As stated in §63.9806, you must show initial compliance with the work practice standards for affected sources according to the following table:

For each .  .  . For the following standard .  .  . You have demonstrated initial compliance if .  .  .
1. Each affected source listed in Table 3 to this subparta. Each applicable work practice standard listed in Table 3 to this subparti. You have selected a method for performing each of the applicable work practice standards listed in Table 3 to this subpart; and
   ii. You have included in your Initial Notification a description of the method selected for complying with each applicable work practice standard, as required by §63.9(b); and
   iii. You submit a signed statement with the Notification of Compliance Status that you have implemented the applicable work practice standard listed in Table 3 to this subpart; and
   iv. You have described in your OM&M plan the method for complying with each applicable work practice standard specified in Table 3 to this subpart.
2. Each basket or container that is used for holding fired refractory shapes in an existing shape preheater and autoclave during the pitch impregnation processa. Control POM emissions from any affected shape preheateri. You have implemented at least one of the work practice standards listed in item 1 of Table 3 to this subpart; and
ii. You have established a system for recording the date and cleaning method for each time you clean an affected basket or container.
3. Each affected new or existing pitch working tankControl POM emissionsYou have captured and vented emissions from the affected pitch working tank to the device that is used to control emissions from an affected defumer or coking oven, or to a thermal or catalytic oxidizer that is comparable to the control device used on an affected defumer or coking oven.
4. Each new or existing chromium refractory products kilnMinimize fuel-based HAP emissionsYou use natural gas, or equivalent, as the kiln fuel.
5. Each existing clay refractory products kilnMinimize fuel-based HAP emissionsYou use natural gas, or equivalent, as the kiln fuel.

Need assistance?