e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 11, 2019

Title 40Chapter ISubchapter CPart 63Subpart HHHHHHH → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart HHHHHHH—National Emission Standards for Hazardous Air Pollutant Emissions for Polyvinyl Chloride and Copolymers Production


Table 8 to Subpart HHHHHHH of Part 63—Methods and Procedures for Conducting Performance Tests for Process Vents

For each control device used to meet the emission limit in Table 1 or 2 to this subpart for the following pollutant .  .  .You must .  .  .Using .  .  .
1. Total hydrocarbonsa. Measure the total hydrocarbon concentration at the outlet of the final control device or in the stackMethod 25A at 40 CFR part 60, appendix A-7. Conduct each test run for a minimum of 1 hour.
2. Total organic HAPa. Measure the total organic HAP concentration at the outlet of the final control device or in the stacki. Method 18 at 40 CFR part 60, appendix A-6 and ASTM D6420-99.a Conduct each test run for a minimum of 1 hour.
ii. Method 320 at 40 CFR part 63, appendix A and ASTM D6348-03.a Conduct each test run for a minimum of 1 hour.
3. Vinyl chloridea. Measure the vinyl chloride concentration at the outlet of the final control device or in the stackMethod 18 at 40 CFR part 60, appendix A-6. Conduct each test run for a minimum of 1 hour.
4. Hydrogen chloridea. Measure hydrogen chloride concentrations at the outlet of the final control device or in the stacki. Method 26 at 40 CFR part 60, appendix A-8, collect 60 dry standard liters of gas per test run; or
ii. Method 26A at 40 CFR part 60, appendix A-8, collect 1 dry standard cubic meter of gas per test run.
5. Dioxin/furana. Measure dioxin/furan concentrations on a toxic equivalency basis (and report total mass per isomer) at the outlet of the final control device or in the stackMethod 23 at 40 CFR part 60, appendix A-7 and collect 5 dry standard cubic meters of gas per test run.
6. Any pollutant from a continuous, batch, or combination of continuous and batch process vent(s)a. Select sampling port locations and the number of traverse pointsMethod 1 or 1A at 40 CFR part 60, appendix A-1.
   b. Determine gas velocity and volumetric flow rateMethod 2, 2A, 2C, 2D, 2F, or 2G at 40 CFR part 60, appendix A-1 and A-2.
   c. Conduct gas molecular weight analysis and correct concentrations the specified percent oxygen in Table 1 or 2 to this subpartMethod 3, 3A, or 3B at 40 CFR part 60, appendix A-2 using the same sampling site and time as HAP samples.
   d. Measure gas moisture contentMethod 4 at 40 CFR part 60, appendix A-3.

aIncorporated by reference, see §63.14.

Need assistance?