e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 4, 2019

Title 40Chapter ISubchapter CPart 63Subpart JJJJJJ → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart JJJJJJ—National Emission Standards for Hazardous Air Pollutants for Industrial, Commercial, and Institutional Boilers Area Sources


Table 5 to Subpart JJJJJJ of Part 63—Fuel Analysis Requirements

As stated in §63.11213, you must comply with the following requirements for fuel analysis testing for affected sources:

To conduct a fuel analysis for the following pollutant .  .  .You must.  .  .Using .  .  .
1. Mercurya. Collect fuel samplesProcedure in §63.11213(b) or ASTM D2234/D2234Ma (for coal) or ASTM D6323a (for biomass) or equivalent.
   b. Compose fuel samplesProcedure in §63.11213(b) or equivalent.
   c. Prepare composited fuel samplesEPA SW-846-3050Ba (for solid samples) or EPA SW-846-3020Aa (for liquid samples) or ASTM D2013/D2013Ma (for coal) or ASTM D5198a (for biomass) or equivalent.
   d. Determine heat content of the fuel typeASTM D5865a (for coal) or ASTM E711a (for biomass) or equivalent.
   e. Determine moisture content of the fuel typeASTM D3173a or ASTM E871a or equivalent.
f. Measure mercury concentration in fuel sampleASTM D6722a (for coal) or EPA SW-846-7471Ba (for solid samples) or EPA SW-846-7470Aa (for liquid samples) or equivalent.
   g. Convert concentrations into units of lb/MMBtu of heat content

aIncorporated by reference, see §63.14.

Need assistance?