e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 4, 2019

Title 40Chapter ISubchapter CPart 63Subpart JJJJJJ → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart JJJJJJ—National Emission Standards for Hazardous Air Pollutants for Industrial, Commercial, and Institutional Boilers Area Sources


Table 4 to Subpart JJJJJJ of Part 63—Performance (Stack) Testing Requirements

As stated in §63.11212, you must comply with the following requirements for performance (stack) test for affected sources:

To conduct a performance test for the following pollutant.  .  .You must.  .  .Using.  .  .
1. Particulate Mattera. Select sampling ports location and the number of traverse pointsMethod 1 in appendix A-1 to part 60 of this chapter.
   b. Determine velocity and volumetric flow-rate of the stack gasMethod 2, 2F, or 2G in appendix A-2 to part 60 of this chapter.
   c. Determine oxygen and carbon dioxide concentrations of the stack gasMethod 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),a or ANSI/ASME PTC 19.10-1981.a
   d. Measure the moisture content of the stack gasMethod 4 in appendix A-3 to part 60 of this chapter.
   e. Measure the particulate matter emission concentrationMethod 5 or 17 (positive pressure fabric filters must use Method 5D) in appendix A-3 and A-6 to part 60 of this chapter and a minimum 1 dscm of sample volume per run.
   f. Convert emissions concentration to lb/MMBtu emission ratesMethod 19 F-factor methodology in appendix A-7 to part 60 of this chapter.
2. Mercurya. Select sampling ports location and the number of traverse pointsMethod 1 in appendix A-1 to part 60 of this chapter.
   b. Determine velocity and volumetric flow-rate of the stack gasMethod 2, 2F, or 2G in appendix A-2 to part 60 of this chapter.
   c. Determine oxygen and carbon dioxide concentrations of the stack gasMethod 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),a or ANSI/ASME PTC 19.10-1981.a
   d. Measure the moisture content of the stack gasMethod 4 in appendix A-3 to part 60 of this chapter.
   e. Measure the mercury emission concentrationMethod 29, 30A, or 30B in appendix A-8 to part 60 of this chapter or Method 101A in appendix B to part 61 of this chapter or ASTM Method D6784-02.a Collect a minimum 2 dscm of sample volume with Method 29 of 101A per run. Use a minimum run time of 2 hours with Method 30A.
   f. Convert emissions concentration to lb/MMBtu emission ratesMethod 19 F-factor methodology in appendix A-7 to part 60 of this chapter.
3. Carbon Monoxidea. Select the sampling ports location and the number of traverse pointsMethod 1 in appendix A-1 to part 60 of this chapter.
   b. Determine oxygen and carbon dioxide concentrations of the stack gasMethod 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),a or ANSI/ASME PTC 19.10-1981.a
   c. Measure the moisture content of the stack gasMethod 4 in appendix A-3 to part 60 of this chapter.
   d. Measure the carbon monoxide emission concentrationMethod 10, 10A, or 10B in appendix A-4 to part 60 of this chapter or ASTM D6522-00 (Reapproved 2005)a and a minimum 1 hour sampling time per run.

aIncorporated by reference, see §63.14.

Need assistance?