Electronic Code of Federal Regulations
We invite you to try out our new beta eCFR site at
https://ecfr.federalregister.gov. We???ve made big
changes to make the eCFR easier to use. Be sure to leave feedback using the Help button on the bottom
right of each page!
|
e-CFR data is current as of August 6, 2020 |
Title 40 → Chapter I → Subchapter C → Part 63 → Subpart XXXX → Appendix |
Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart XXXX—National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing
Table 1 to Subpart XXXX of Part 63—Emission Limits for Tire Production Affected Sources
As stated in §63.5984, you must comply with the emission limits for each new, reconstructed, or existing tire production affected source in the following table:
| For each . . . | You must meet the following emission limits. |
|---|---|
| 1. Option 1—HAP constituent option | a. Emissions of each HAP in Table 16 to this subpart must not exceed 1,000 grams HAP per megagram (2 pounds per ton) of total cements and solvents used at the tire production affected source, and b. Emissions of each HAP not in Table 16 to this subpart must not exceed 10,000 grams HAP per megagram (20 pounds per ton) of total cements and solvents used at the tire production affected source. |
| 2. Option 2—production-based option | Emissions of HAP must not exceed 0.024 grams per megagram (0.00005 pounds per ton) of rubber used at the tire production affected source. |