e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 10, 2019

Title 40Chapter ISubchapter CPart 63Subpart WWWW → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart WWWW—National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production


Table 11 to Subpart WWWW of Part 63—Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying With a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis

As required in §63.5865, in order to comply with a percent reduction limit or a lbs/ton limit on an averaging basis for continuous lamination lines and continuous casting lines you must determine the data in the following table:

For each .  .  . That .  .  . You must determine .  .  .
1. Wet-out areaIs uncontrolledAnnual uncontrolled wet-out area organic HAP emissions.
2. Wet-out areaa. Has an enclosure that is not a PTEi. The capture efficiency of the enclosure, and
ii. Annual organic HAP emissions that escape the enclosure.
3. Wet-out areaHas an enclosure that is a PTEThat the enclosure meets the requirements of EPA Method 204 of appendix M to 40 CFR part 51 for a PTE.
4. OvenIs uncontrolledAnnual uncontrolled oven organic HAP emissions.
5. Linea. Is controlled or uncontrolledi. The amount of neat resin plus applied, and
ii. The amount of neat gel coat plus applied.
6. Add-on control devicei. Total annual inlet organic HAP emissions, and total annual outlet organic HAP emissions.

Need assistance?