e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 6, 2019

Title 40Chapter ISubchapter CPart 63Subpart QQQQ → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart QQQQ—National Emission Standards for Hazardous Air Pollutants: Surface Coating of Wood Building Products


Table 4 to Subpart QQQQ of Part 63—Applicability of General Provisions to Subpart QQQQ of Part 63

You must comply with the applicable General Provisions requirements according to the following table:

CitationSubjectApplicable
to subpart
QQQQ
Explanation
§63.1(a)(1)-(14)General ApplicabilityYes
§63.1(b)(1)-(3)Initial Applicability DeterminationYesApplicability to subpart QQQQ is also specified in §63.4681.
§63.1(c)(1)Applicability After Standard EstablishedYes
§63.1(c)(2)Applicability of Permit Program for Area SourcesNoArea sources are not subject to subpart QQQQ.
§63.1(c)(3)[Reserved]No
§63.1(c)(4)-(5)Extensions and NotificationsYes
§63.1(d)[Reserved]No
§63.1(e)Applicability of Permit Program Before Relevant Standard is SetYes
§63.2DefinitionsYesAdditional definitions are specified in §63.4781.
§63.3(a)-(c)Units and AbbreviationsYes
§63.4(a)(1)-(5)Prohibited ActivitiesYes
§63.4(b)-(c)Circumvention/SeverabilityYes
§63.5(a)Construction/ReconstructionYes
§63.5(b)(1)-(6)Requirements for Existing, Newly Constructed, and Reconstructed SourcesYes
§63.5(c)[Reserved]No
§63.5(d)Application for Approval of Construction/ReconstructionYes
§63.5(e)Approval of Construction/ReconstructionYes
§63.5(f)Approval of Construction/Reconstruction Based on Prior State ReviewYes
§63.6(a)Compliance With Standards and Maintenance Requirements—ApplicabilityYes
§63.6(b)(1)-(7)Compliance Dates for New and Reconstructed SourcesYes§63.4683 specifies compliance dates.
§63.6(c)(1)-(5)Compliance Dates for Existing SourcesYes§63.4683 specifies compliance dates.
§63.6(d)[Reserved]No
§63.6(e)(1)(i)General Duty to Minimize EmissionsNoSee §63.4700(b) for general duty requirement.
§63.6(e)(1)(ii)Requirement to Correct Malfunctions ASAPNo
§63.6(e)(1)(iii)Operation and Maintenance Requirements Enforceable Independent of Emissions LimitationsYes
§63.6(e)(2)[Reserved]No
§63.6(e)(3)SSMPNo
§63.6(f)(1)Compliance Except During SSMNo
§63.6(f)(2)-(3)Methods for Determining ComplianceYes
§63.6(g)(1)-(3)Use of an Alternative StandardYes
§63.6(h)Compliance with Opacity/Visible Emissions StandardsNoSubpart QQQQ does not establish opacity standards and does not require continuous opacity monitoring systems (COMS).
§63.6(i)(1)-(16)Extension of ComplianceYes
§63.6(j)Presidential Compliance ExemptionYes
§63.7(a)(1)Performance Test Requirements—ApplicabilityYesApplies to all affected sources. Additional requirements for performance testing are specified in §§63.4751, 63.4752, 63.4764, 63.4765, and 63.4766.
§63.7(a)(2)Performance Test Requirements—DatesYesApplies only to performance tests for capture system and control device efficiency at sources using these to comply with the standard. §63.4760 specifies the schedule for performance test requirements that are earlier than those specified in §63.7(a)(2).
§63.7(a)(3)Performance Tests Required By the AdministratorYes
§63.7(a)(4)Notification of Delay in Performance Testing Due to Force MajeureYes
§63.7(b)-(d)Performance Test Requirements—Notification, Quality Assurance, Facilities Necessary for Safe Testing, Conditions During TestYesApplies only to performance tests for capture system and add-on control device efficiency at sources using these to comply with the standard.
§63.7(e)(1)Performance TestingYes
§63.7(f)Performance Test Requirements—Use of Alternative Test MethodYesApplies to all test methods except those used to determine capture system efficiency.
§63.7(g)-(h)Performance Test Requirements—Data Analysis, Recordkeeping, Reporting, Waiver of TestYesApplies only to performance tests for capture system and add-on control device efficiency at sources using these to comply with the standard.
§63.8(a)(1)-(2)Monitoring Requirements—ApplicabilityYesApplies only to monitoring of capture system and add-on control device efficiency at sources using these to comply with the standard. Additional requirements for monitoring are specified in §63.4768.
§63.8(a)(3)[Reserved]No
§63.8(a)(4)Additional Monitoring RequirementsNoSubpart QQQQ does not have monitoring requirements for flares.
§63.8(b)Conduct of MonitoringYes
§63.8(c)(1)Continuous Monitoring System (CMS) Operation and MaintenanceYesApplies only to monitoring of capture system and add-on control device efficiency at sources using these to comply with the standard. Additional requirements for CMS operations and maintenance are specified in §63.4768.
§63.8(c)(1)(i)General Duty to Minimize Emissions and CMS OperationNo
§63.8(c)(1)(ii)Operation and Maintenance of CMSYes
§63.8(c)(1)(iii)Requirement to Develop SSM Plan for CMSNo
§63.8(c)(2)-(3)Monitoring System InstallationYes
§63.8(c)(4)CMSsNo§63.4768 specifies the requirements for the operation of CMS for capture systems and add-on control devices at sources using these to comply.
§63.8(c)(5)COMSNoSubpart QQQQ does not have opacity for visible emission standards.
§63.8(c)(6)CMS RequirementsYes§63.4768 specifies the requirements for monitoring systems for capture systems and add-on control devices at sources using these to comply.
§63.8(c)(7)CMS Out-of-Control PeriodsYes
§63.8(c)(8)CMS Out-of-Control Periods ReportingNo§63.4720 requires reporting of CMS out-of-control periods.
§63.8(d)-(e)Quality Control Program and CMS Performance EvaluationNoSubpart QQQQ does not require the use of continuous emissions monitoring systems.
§63.8(f)(1)-(5)Use of an Alternative Monitoring MethodYes
§63.8(f)(6)Alternative to Relative Accuracy TestNoSubpart QQQQ does not require the use of continuous emissions monitoring systems.
§63.8(g)(1)-(5)Data ReductionNo§§63.4767 and 63.4768 specify monitoring data reduction.
§63.9(a)-(d)Notification RequirementsYes
§63.9(e)Notification of Performance TestYesApplies only to capture system and add-on control device performance tests at sources using these to comply with the standard.
§63.9(f)Notification of Visible Emissions/Opacity TestNoSubpart QQQQ does not have opacity or visible emission standards.
§63.9(g)(1)-(3)Additional Notifications When Using CMSNoSubpart QQQQ does not require the use of continuous emissions monitoring systems.
§63.9(h)Notification of Compliance StatusYes§63.4710 specifies the dates for submitting the Notification of Compliance Status.
§63.9(i)Adjustment of Submittal DeadlinesYes
§63.9(j)Change in Previous InformationYes
§63.10(a)Recordkeeping/Reporting—Applicability and General InformationYes
§63.10(b)(1)General Recordkeeping RequirementsYesAdditional requirements are specified in §§63.4730 and 63.4731.
§63.10(b)(2)(i)-(ii)Recordkeeping of Occurrence and Duration of Startups and ShutdownsNo
§63.10(b)(2)(iii)Recordkeeping Relevant to CMSYes
§63.10(b)(2)(iv)-(v)Recordkeeping Relevant to SSMNo
§63.10(b)(2)(vi)-(xi)Recordkeeping for CMS MalfunctionsYes
§63.10(b)(2)(xii)RecordsYes
§63.10(b)(2)(xiii)NoSubpart QQQQ does not require the use of continuous emissions monitoring systems.
§63.10(b)(2)(xiv)Yes
§63.10(b)(3)Recordkeeping Requirements for Applicability DeterminationsYes
§63.10(c)(1)-(6)Additional Recordkeeping Requirements for Sources with CMSYes
§63.10(c)(7)-(8)NoThe same records are required in §63.4720(a)(7).
§63.10(c)(9)-(14)Yes
§63.10(c)(15)Use of SSM PlanNo
§63.10(d)(1)General Reporting RequirementsYesAdditional requirements are specified in §63.4720.
§63.10(d)(2)Report of Performance Test ResultsYesAdditional requirements are specified in §63.4720(b).
§63.10(d)(3)Reporting Opacity or Visible Emissions ObservationsNoSubpart QQQQ does not require opacity or visible emissions observations.
§63.10(d)(4)Progress Reports for Sources With Compliance ExtensionsYes
§63.10(d)(5)SSM ReportsNoMalfunctions shall be reported based on compliance option under §63.4720(a)(5-7).
§63.10(e)(1)-(2)Additional CMS ReportsNoSubpart QQQQ does not require the use of continuous emissions monitoring systems.
§63.10(e)(3)Excess Emissions/CMS Performance ReportsNo§63.4720(b) specifies the contents of periodic compliance reports.
§63.10(e)(4)COMS Data ReportsNoSubpart QQQQ does not specify requirements for opacity or COMS.
§63.10(f)Recordkeeping/Reporting WaiverYes
§63.11Control Device Requirements/FlaresNoSubpart QQQQ does not specify use of flares for compliance.
§63.12State Authority and DelegationsYes
§63.13AddressesYes
§63.14Incorporation by ReferenceYesTest Methods ANSI A135.4-2012, ANSI/ASME PTC 19.10-1981, Part 10, ASTM D1475-13, ASTM D2111-10 (Reapproved 2015), ASTM D2369-10 (Reapproved 2015)e, ASTM D2697-03 (Reapproved 2014), ASTM D4840-99 (2018)e, ASTM D6093-97 (Reapproved 2016), ASTM D6348-03 (Reapproved 2010) and NCASI Method ISS/FP A105.01 (incorporated by reference, see §63.14).
§63.15Availability of Information/ConfidentialityYes
§63.16Requirements for Performance Track Member FacilitiesYes

[84 FR 7705, Mar. 4, 2019]

Need assistance?