e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 9, 2019

Title 40Chapter ISubchapter CPart 63Subpart KKKK → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart KKKK—National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans


Table 3 to Subpart KKKK of Part 63—Emission Limits for Affected Sources Using the Control Efficiency/Outlet Concentration Compliance Option

You must comply with the emission limits that apply to your affected source in the following table as required by §63.3490(d).

If you use the control efficiency/outlet concentration option to comply with the emission limitations for any coating operation(s) .  .  . Then you must comply with one of the following by using an emissions control system to .  .  .
1. in a new or reconstructed affected sourcea. reduce emissions of total HAP, measured as THC (as carbon),a by 97 percent; or
b. limit emissions of total HAP, measured as THC (as carbon),a to 20 ppmvd at the control device outlet and use a PTE.
2. in an existing affected sourcea. reduce emissions of total HAP, measured as THC (as carbon),a by 95 percent; or
b. limit emissions of total HAP, measured as THC (as carbon),a to 20 ppmvd at the control device outlet and use a PTE.

aYou may choose to subtract methane from THC as carbon measurements.

Need assistance?