e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

e-CFR data is current as of December 3, 2019

Title 40Chapter ISubchapter CPart 63Subpart KKKK → Appendix


Title 40: Protection of Environment
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED)
Subpart KKKK—National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans


Table 2 to Subpart KKKK of Part 63—Emission Limits for Existing Affected Sources

You must comply with the emission limits that apply to your affected source in the following table as required by §63.3490(a) through (c).

If you apply surface coatings to metal cans or metal can parts in this subcategory ...Then for all coatings of this type ...You must meet the following organic HAP emission limit in kg HAP/liter solids (lbs HAP/gal solids):a b
1. One and two-piece draw and iron can body coatinga. Two-piece beverage cans—all coatings
b. Two-piece food cans—all coatings
c. One-piece aerosol cans—all coatings
0.07 (0.59).
0.06 (0.51).
0.12 (0.99).
2. SheetcoatingSheetcoating0.03 (0.26).
3. Three-piece can assemblya. Inside spray0.29 (2.43).
   b. Aseptic side seam stripes on food cans1.94 (16.16).
   c. Nonaseptic side seam stripes on food cans0.79 (6.57).
   d. Side seam stripes on general line nonfood cans1.18 (9.84).
   e. Side seam stripes on aerosol cans1.46 (12.14).
4. End coatinga. Aseptic end seal compounds0.06 (0.54).
   b. Nonaseptic end seal compounds0.00 (0.00).
   c. Repair spray coatings2.06 (17.17).

aIf you apply surface coatings of more than one type within any one subcategory you may calculate an OSEL according to §63.3531(i).

bRounding differences in specific emission limits are attributable to unit conversions.

Need assistance?