40 CFR (63.1440 TO 6175)
ENVIRONMENTAL PROTECTION AGENCY
| 40 CFR
|
American Conference of Governmental Industrial Hygienists, Customer Service Department
1330 Kemper Meadow Drive, Cincinnati, Ohio 45240–1634
|
| Industrial Ventilation: A Manual of Recommended Practice
| 63.1502
|
| Industrial Ventilation: A Manual of Recommended Practice, 23rd Edition, 1998, Chapters 3 and Chapter 5
| 63.1506(c); 63.2984(e); 63.3003
|
American Petroleum Institute
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
|
| API Publication 2517, Evaporative Loss from External Floating-Roof Tanks, 3rd Ed., February 1989
| 63.2406
|
American Society of Mechanical Engineers
3 Park Avenue, New York, NY 10016–5990; Order inquiries: ASME International, Orders/Inquiries, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763 Also available from Global Engineering Documents, Sales Department, 15 Inverness Way East, Englewood, CO 80112
|
| ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses, Part 10: Instruments and Apparatus
| 63.3166(a)(3); 63.3360(e)(1)(iii); 63.3545(a)(3); 63.3555(a)(3); 63.4166(a)(3); 63.4362(a)(3); 63.4766(a)(3); 63.4965(a)(3); 63.5160(d)(1)(iii)
|
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
|
| ASTM D 1475–98 (Reapproved 2003), Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
| 63.3941(b)(4), 63.3941(c), 63.3951(c), 63.4141(b)(3), 63.4141(c), 63.4551(c), 63.3151(b)
|
| ASTM D 2099-00, Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
| 63.5350
|
| ASTM D 2697–86 (Reapproved 1998), Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
| 63.3161(f)(1), 63.3521(b)(1), 63.3941(b)(1), 63.4141(b)(1); 63.4741(b)(1); 63.4941(b)(1); 63.5160(c)
|
| ASTM D 2879–83, Standard Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
| 63.2406
|
| ASTM D 2879–96, Standard Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
| 63.2406
|
| ASTM D 5066-91 (Reapproved 2001), Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
| 63.3161(g)
|
| ASTM D 5087-02, Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solvent-borne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
| 63.3165(e), 63.3176 Appendix A
|
| ASTM D 5291-02, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
| 63.3981
|
| ASTM D 5965-02, Standard Test Methods for Specific Gravity of Coating Powders
| 63.3151(b), 63.3951(c)
|
| ASTM D 6053-00, Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes
| 63.3981
|
| ASTM D 6093–97 (Reapproved 2003), Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
| 63.3161(f)(1); 63.3521(b)(1); 63.3941(b)(1); 63.4141(b)(1); 63.4741(b)(1); 63.4941(b)(1); 63.5160(c)
|
| ASTM D 6266-00a, Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
| 63.3165(e)
|
| ASTM D 6348-03, Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
| 63 Subpart DDDD, Appendix B; 63 Subpart DDDD, Table 4
|
| ASTM D 6420-99 (Reapproved 2004), Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
| 63.2351; 63.2354
|
| ASTM E 145–94 (Reapproved 2001), Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
| 63.4581 Appendix A
|
National Council of the Paper Industry for Air and Stream Improvement (NCASI)
P.O. Box 13318, Research Triangle Park, North Carolina 27709-3318
|
| Method CI/WP-98.01, Chilled Impinger Method for Use at Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol, August 1998
| 63 Subpart DDDD, Table 4
|
| Method IM/CAN/WP-99.02, Impinger/Canister Source Sampling Method for Selected HAPS and Other Compounds at Wood Products Facilities, January 2004
| 63 Subpart DDDD, Table 4; 63 Subpart DDDD, Appendix B
|
| NCASI Method ISS/FP-A105.01, Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds, December 2005
| 63 Subpart DDDD, Table 4; 63 Subpart DDDD, Appendix B
|
U.S. Environmental Protection Agency, National Technical Information Service (NTIS)
5285 Port Royal Road, Springfield, VA
|
| Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo–p–Dioxins and –Dibenzofurans (CDDs and CDFs) and 1989 Update, EPA/625/3–89/016, March 1989 (NTIS No. PB 90–145756)
| 63.1513(d) |
