61 FR 11107, Mar. 18, 1996, unless otherwise noted.
This subpart establishes requirements under section 6 of TSCA applicable to the transboundary shipments of PCBs and PCB Items into and out of the United States for disposal. Nothing in this subpart is intended to obviate or otherwise alter obligations applicable to imported or exported PCBs and PCB Items under foreign laws, international agreements or arrangements, other United States statutes and regulations, other sections of TSCA (e.g., sections 13 and 14), or laws of the various States of the United States. No provision of this section shall be construed to affect or limit the applicability of any requirement applicable to transporters of PCB waste under regulations issued by the U.S. Department of Transportation (DOT) and set forth at 49 CFR parts 171-180.
(a) General provisions. No person may import PCBs or PCB Items for disposal without an exemption issued under the authority of TSCA section 6(e)(3).
(b) [Reserved]
[63 FR 35460, June 29, 1998]
(a) General provisions. No person may export PCBs or PCB Items for disposal without an exemption, except that:
(1) PCBs and PCB Items at concentrations <50 ppm (or <10 µg PCB/100 cm2 if no free-flowing liquids are present) may be exported for disposal.
(2) For the purposes of this section, PCBs and PCB Items of unknown concentrations shall be treated as if they contain ≥50 ppm.
(b) [Reserved]
[61 FR 11107, Mar. 18, 1996, as amended at 63 FR 35460, June 29, 1998]
For purposes of this subpart, the following transboundary shipments are not considered exports or imports:
(a) PCB waste generated in the United States, transported outside the Customs Territory of the United States (including any residuals resulting from cleanup of spills of such wastes in transit) through another country or its territorial waters, or through international waters, and returned to the United States for disposal.
(b) PCB waste in transit, including any residuals resulting from cleanup of spills during transit, through the United States (e.g., from Mexico to Canada, from Canada to Mexico).
(c) PCB waste transported from any State to any other State for disposal, regardless of whether the waste enters or leaves the customs territory of the United States, provided that the PCB waste or the PCBs from which the waste was derived were present in the United States on January 1, 1979, and have remained within the United States since that date.
[63 FR 35461, June 29, 1998, as amended at 66 FR 17478, Mar. 30, 2001]