(a) The materials listed in this section are incorporated by reference in this part. These incorporations by reference were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the approval, and notice of any change in these materials will be published in the Federal Register. The materials are available for purchase at the corresponding addresses as noted, and all are available for inspection at the Federal Communications Commission, located at the address indicated in 47 CFR 0.401(a), Tel: (202) 418-0270, and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(b) The following documents are available from the following address: American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, NY 10036, (212) 642-4900, or at http://webstore.ansi.org/ansidocstore/default.asp;
(1) ANSI C63.17-2013: “American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices,” approved August 12, 2013, IBR approved for § 15.31.
(2) Third Edition of the International Special Committee on Radio Interference (CISPR), Pub. 22, Information Technology Equipment-Radio Disturbance Characteristics-Limits and Methods of Measurement,” 1997, IBR approved for § 15.09.
(c) The following documents are available from the following address: Cable Television Laboratories, Inc., 858 Coal Creek Circle, Louisville, Colorado, 80027, http://www.cablelabs.com/opencable/udcp, (303) 661-9100;
(1) M-UDCP-PICS-I04-080225, “Uni-Directional Cable Product Supporting M-Card: Multiple Profiles; Conformance Checklist: PICS,” February 25, 2008, IBR approved for § 15.123(c).
(2) TP-ATP-M-UDCP-I05-20080304, “Uni-Directional Digital Cable Products Supporting M-Card; M-UDCP Device Acceptance Test Plan,” March 4, 2008, IBR approved for § 15.123(c).
(d) The following documents are available from the following address: Consumer Electronics Association, 1919 S. Eads St., Arlington; VA 22202, http://www.ce.org/Standards/Standard-Listings.aspx, (703) 907-7634.
(1) CEA-542-B: “CEA Standard: Cable Television Channel Identification Plan,” July 2003, IBR approved for § 15.118.
(2) CEA-766-A: “U.S. and Canadian Region Rating Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information using ATSC A/65-A Program and System Information Protocol (PSIP),” April 2001, IBR approved for § 15.120.
(3) Uni-Dir-PICS-I01-030903: “Uni-Directional Receiving Device: Conformance Checklist: PICS Proforma,” September 3, 2003, IBR approved for § 15.123(c).
(4) Uni-Dir-ATP-I02-040225: “Uni-Directional Receiving Device, Acceptance Test Plan,” February 25, 2004, IBR approved for § 15.123(c).
(e) The following document is available from the European Telecommunications Standards Institute, 650 Route des Lucioles, F-06921 Sophia Antipolis Cedex, France, or at http://www.etsi.org/deliver/etsi_en/300400_300499/30042201/01.04.02_60/en_30042201v010402p.pdf.
(1) ETSI EN 300 422-1 V1.4.2 (2011-08): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and methods of measurement,” Copyright 2011, IBR approved for § 15.236(g).
(2) [Reserved]
(f) The following documents are available from the following address: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, (800) 854-7179, or at http://global.ihs.com;
(1) EIA-608: “Recommended Practice for Line 21 Data Service,” 1994, IBR approved for § 15.120.
(2) EIA-744: “Transport of Content Advisory Information Using Extended Data Service (XDS),” 1997, IBR approved for § 15.120.
(g) Institute of Electrical and Electronic Engineers (IEEE), 3916 Ranchero Drive, Ann Arbor, MI 48108, 1-800-699-9277, http://www.techstreet.com/ieee.
(1) ANSI C63.4-2014: “American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz,” ANSI approved June 13, 2014, IBR approved for § 15.35(a).
(2) ANSI C63.4-2014: “American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz,” ANSI approved June 13, 2014, IBR approved for § 15.31(a)(4), except clauses 4.5.3, 4.6, 6.2.13, 8.2.2, 9, and 13.
(3) ANSI C63.10-2013, “American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices,”ANSI approved June 27, 2013, IBR approved for § 15.31(a)(3).
(h) The following documents are available from the following addresses: Society of Cable Telecommunications Engineers (SCTE) c/o Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112 or the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036 or at http://www.scte.org/standards/index.cfm;
(1) SCTE 28 2003 (formerly DVS 295): “Host-POD Interface Standard,” 2003, IBR approved for § 15.123.
(2) SCTE 40 2003 (formerly DVS 313): “Digital Cable Network Interface Standard,” 2003, IBR approved for § 15.123.
(3) SCTE 41 2003 (formerly DVS 301): “POD Copy Protection System,” 2003, IBR approved for § 15.123.
(4) ANSI/SCTE 54 2003 (formerly DVS 241): “Digital Video Service Multiplex and Transport System Standard for Cable Television,” 2003, IBR approved for § 15.123.
(5) ANSI/SCTE 65 2002 (formerly DVS 234): “Service Information Delivered Out-of-Band for Digital Cable Television,” 2002, IBR approved for § 15.123.
[77 FR 43013, July 23, 2012, as amended at 80 FR 2838, Jan. 21, 2015; 80 FR 33447, June 12, 2015; 80 FR 73068, Nov. 23, 2015; 82 FR 50832, Nov. 2, 2017; 85 FR 64406, Oct. 13, 2020]