Individual Manufacturing Quotas

§ 1303.21 Individual manufacturing quotas.

(a) The Administrator shall, on or before July 1 of each year, fix for and issue to each person who is registered to manufacture a basic class of controlled substance listed in Schedule I or II, and who applies for a manufacturing quota, an individual manufacturing quota authorizing that person to manufacture during the next calendar year a quantity of that basic class. Any manufacturing quota fixed and issued by the Administrator shall be subject to his authority to reduce or limit it at a later date pursuant to § 1303.26 and to his authority to revoke or suspend it at any time pursuant to § 1301.36 of this chapter.

(b) No individual manufacturing quota shall be required for registrants listed in § 1303.12(e).

[36 FR 7786, Apr. 24, 1971. Redesignated at 38 FR 26609, Sept. 24, 1973, as amended at 62 FR 13958, Mar. 24, 1997; 83 FR32790, July 16, 2018]

§ 1303.22 Procedure for applying for individual manufacturing quotas.

Any person who is registered to manufacture any basic class of controlled substance listed in Schedule I or II and who desires to manufacture a quantity of such class shall apply on DEA Form 189 for a manufacturing quota for such quantity of such class. Copies of DEA Form 189 may be obtained from, and shall be filed (on or before May 1 of the year preceding the calendar year for which the manufacturing quota is being applied) with, the UN Reporting and Quota Section, Diversion Control Division. See the Table of DEA Mailing Addresses in § 1321.01 of this chapter for the current mailing address. A separate application must be made for each basic class desired to be manufactured. The applicant shall state:

(a) The name and Administration Controlled Substances Code Number, as set forth in part 1308 of this chapter, of the basic class.

(b) For the basic class in each of the current and preceding 2 calendar years,

(1) The authorized individual manufacturing quota, if any;

(2) The actual or estimated quantity manufactured;

(3) The actual or estimated net disposal;

(4) The actual or estimated inventory allowance pursuant to § 1303.24; and

(5) The actual or estimated inventory as of December 31;

(c) For the basic class in the next calendar year,

(1) The desired individual manufacturing quota; and

(2) Any additional factors which the applicant finds relevant to the fixing of his individual manufacturing quota, including the trend of (and recent changes in) his and the national rates of net disposal, his production cycle and current inventory position, the economic and physical availability of raw materials for use in manufacturing and for inventory purposes, yield and stability problems, potential disruptions to production (including possible labor strikes) and recent unforeseen emergencies such as floods and fires.

(d) The Administrator may require additional information from an applicant which, in the Administrator's judgment, may be helpful in detecting or preventing diversion, including customer identities and amounts of the controlled substance sold to each customer.

[36 FR 7786, Apr. 24, 1971, as amended at 36 FR 13386, July 21, 1971; 37 FR 15920, Aug. 8, 1972. Redesignated at 38 FR 26609, Sept. 24, 1973, and amended at 46 FR 28841, May 29, 1981; 51 FR 5319, Feb. 13, 1986; 62 FR 13958, Mar. 24, 1997; 75 FR 10677, Mar. 9, 2010; 81 FR 97020, Dec. 30, 2016; 83 FR 32790, July 16, 2018]

§ 1303.23 Procedure for fixing individual manufacturing quotas.

(a) In fixing individual manufacturing quotas for a basic class of controlled substance listed in Schedule I or II, the Administrator shall allocate to each applicant who is currently manufacturing such class a quota equal to 100 percent of the estimated net disposal of that applicant for the next calendar year, adjusted—

(1) By the amount necessary to increase or reduce the estimated inventory of the applicant on December 31 of the current year to his estimated inventory allowance for the next calendar year, pursuant to § 1303.24, and

(2) By any other factors which the Administrator deems relevant to the fixing of the individual manufacturing quota of the applicant, including the trend of (and recent changes in) his and the national rates of net disposal, his production cycle and current inventory position, the economic and physical availability of raw materials for use in manufacturing and for inventory purposes, yield and stability problems, potential disruptions to production (including possible labor strikes), the extent of any diversion of the controlled substance, and recent unforeseen emergencies such as floods and fires.

(b) In fixing individual manufacturing quotas for a basic class of controlled substance listed in Schedule I or II, the Administrator shall allocate to each applicant who is not currently manufacturing such class a quota equal to 100 percent of the reasonably estimated net disposal of that applicant for the next calendar year, as determined by the Administrator, adjusted—

(1) By the amount necessary to provide the applicant his estimated inventory allowance for the next calendar year, pursuant to § 1303.24, and

(2) By any other factors which the Administrator deems relevant to the fixing of the individual manufacturing quota of the applicant, including the trend of (and recent changes in) the national rate of net disposal, his production cycle and current inventory position, the economic and physical availability of raw materials for use in manufacturing and for inventory purposes, yield and stability problems, potential disruptions to production (including possible labor strikes), any risk of diversion of the controlled substance, and recent unforeseen emergencies such as floods and fires.

(c) The Administrator shall, on or before March 1 of each year, adjust the individual manufacturing quota allocated for that year to each applicant in paragraph (a) of this section by the amount necessary to increase or reduce the actual inventory of the applicant to December 31 of the preceding year to his estimated inventory allowance for the current calendar year, pursuant to § 1303.24.

[36 FR 7786, Apr. 24, 1971, as amended at 37 FR 15920, Aug. 8, 1972. Redesignated at 38 FR 26609, Sept. 24, 1973; 83 FR 32790, July 16, 2018]

§ 1303.24 Inventory allowance.

(a) For the purpose of determining individual manufacturing quotas pursuant to § 1303.23, each registered manufacturer shall be allowed as a part of such quota an amount sufficient to maintain an inventory equal to,

(1) For current manufacturers, 50 percent of his average estimated net disposal for the current calendar year and the last preceding calendar year; or

(2) For new manufacturers, 50 percent of his reasonably estimated net disposal for the next calendar year as determined by the Administrator.

(b) During each calendar year each registered manufacturer shall be allowed to maintain an inventory of a basic class not exceeding 65 percent of his estimated net disposal of that class for that year, as determined at the time his quota for that year was determined. At any time the inventory of a basic class held by a manufacturer exceeds 65 percent of his estimated net disposal, his quota for that class is automatically suspended and shall remain suspended until his inventory is less than 60 percent of his estimated net disposal. The Administrator may, upon application and for good cause shown, permit a manufacturer whose quota is, or is likely to be, suspended pursuant to this paragraph to continue manufacturing and to accumulate an inventory in excess of 65 percent of his estimated net disposal, upon such conditions and within such limitations as the Administrator may find necessary or desirable.

(c) If, during a calendar year, a registrant has manufactured the entire quantity of a basic class allocated to him under an individual manufacturing quota, and his inventory of that class is less than 40 percent of his estimated net disposal of that class for that year, the Administrator may, upon application pursuant to § 1303.25, increase the quota of such registrant sufficiently to allow restoration of the inventory to 50 percent of the estimated net disposal for that year.

[36 FR 7786, Apr. 24, 1971, as amended at 36 FR 13386, July 21, 1971. Redesignated at 38 FR 26609, Sept. 24, 1973]

§ 1303.25 Increase in individual manufacturing quotas.

(a) Any registrant who holds an individual manufacturing quota for a basic class of controlled substance listed in Schedule I or II may file with the Administrator an application on Administration Form 189 for an increase in such quota in order for him to meet his estimated net disposal, inventory and other requirements during the remainder of such calendar year.

(b) The Administrator, in passing upon a registrant's application for an increase in his individual manufacturing quota, shall take into consideration any occurrences since the filing of such registrant's initial quota application that may require an increased manufacturing rate by such registrant during the balance of the calendar year. In passing upon such application the Administrator may also take into consideration the amount, if any, by which his determination of the total quantity for the basic class of controlled substance to be manufactured under § 1303.11 exceeds the aggregate of all the individual manufacturing quotas for the basic class of controlled substance, and the equitable distribution of such excess among other registrants.

[36 FR 7786, Apr. 24, 1971, as amended at 36 FR 13386, July 21, 1971. Redesignated at 38 FR 26609, Sept. 24, 1973]

§ 1303.26 Reduction in individual manufacturing quotas.

The Administrator may at any time reduce an individual manufacturing quota for a basic class of controlled substance listed in Schedule I or II which he has previously fixed in order to prevent the aggregate of the individual manufacturing quotas and import permits outstanding or to be granted from exceeding the aggregate production quota which has been established for that class pursuant of § 1303.11, as adjusted pursuant to § 1303.13. If a quota assigned to a new manufacturer pursuant to § 1303.23(b), or if a quota assigned to any manufacturer is increased pursuant to § 1303.24(c), or if an import permit issued to an importer pursuant to part 1312 of this chapter, causes the total quantity of a basic class to be manufactured and imported during the year to exceed the aggregate production quota which has been established for that class pursuant to § 1303.11, as adjusted pursuant to § 1303.13, the Administrator may proportionately reduce the individual manufacturing quotas and import permits of all other registrants to keep the aggregate production quota within the limits originally established, or, alternatively, the Administrator may reduce the individual manufacturing quota of any registrant whose quota is suspended pursuant to § 1303.24(b) or § 1301.36 of this chapter, or is abandoned pursuant to § 1303.27.

[36 FR 7786, Apr. 24, 1971, as amended at 37 FR 15920, Aug. 8, 1972. Redesignated at 38 FR 26609, Sept. 24, 1973, as amended at 62 FR 13958, Mar. 24, 1997]

§ 1303.27 Abandonment of quota.

Any manufacturer assigned an individual manufacturing quota for any basic class pursuant to § 1303.23 may at any time abandon his right to manufacture all or any part of such quota by filing with the Drug & Chemical Evaluation Section a written notice of such abandonment, stating the name and Administration Controlled Substances Code Number, as set forth in part 1308 of this chapter, of the substance and the amount which he has chosen not to manufacture. The Administrator may, in his discretion, allocate such amount among the other manufacturers in proportion to their respective quotas.

[36 FR 7786, Apr. 24, 1971, as amended at 36 FR 13386, July 21, 1971. Redesignated at 38 FR 26609, Sept. 24, 1973, and amended at 46 FR 28841, May 29, 1981; 51 FR 5319, Feb. 13, 1986; 62 FR 13958, Mar. 24, 1997]