About GPO   |   Newsroom/Media   |   Congressional Relations   |   Inspector General   |   Careers   |   Contact   |   askGPO   |   Help  
 
Home   |   Customers   |   Vendors   |   Libraries  

The Electronic Code of Federal Regulations (e-CFR) is a regularly updated, unofficial editorial compilation of CFR material and Federal Register amendments produced by the National Archives and Records Administration's Office of the Federal Register (OFR) and the Government Printing Office.

Parallel Table of Authorities and Rules for the Code of Federal Regulations and the United States Code
Text | PDF

Find, review, and submit comments on Federal rules that are open for comment and published in the Federal Register using Regulations.gov.

Purchase individual CFR titles from the U.S. Government Online Bookstore.

Find issues of the CFR (including issues prior to 1996) at a local Federal depository library.

[2]
 
 

Electronic Code of Federal Regulations

blue pill

e-CFR Data is current as of September 29, 2014

Title 46–Shipping
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

46 CFR (PARTS 90–139)
COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
46 CFR
American Boat and Yacht Council (ABYC)
3069 Solomon's Island Road, Edgewater, MD 21037
A–1–93—Marine Liquified Petroleum Gas (LPG) Systems
121.240
A–3–93—Galley Stoves
121.200; 129.550
A–7–70—Boat Heating Systems
121.200; 129.550
A–22–93—Marine Compressed Natural Gas (CNG) Systems
121.240
E–1–72 Bonding of Direct Current Systems
129.120
E–8 1994 Alternating Current (AC) Electrical Systems on Boats
129.120
E–9 1990 Direct–Current (DC) Electrical Systems on Boats
129.120
H–25–94—Portable Gasoline Fuel Systems
119.458
P–1–93—Installation of Exhaust Systems for Propulsion and Auxiliary Engines
116.405; 119.425; 119.430
American Bureau of Shipping
Publications Department, ABS Plaza, 16855 Northchase Drive, Houston, Texas 77060
Guide for Building and Classing High–Speed Craft, February, 1997
114.600; 116.300
Rules for Building and Classing Mobile Offshore Drilling Units, 1980
108.113; 108.705
Rules for Building and Classing Mobile Offshore Drilling Units, 1994
110.10–1; 111.12–1(a); 111.12–3; 111.12–5; 111.12–7; 111.33–11; 111.35–1; 111.70–1(a)
Rules for Building and Classing Mobile Offshore Drilling Units, 1998
107.205(b)
Rules for Building and Classing Aluminium Vessels, 1975
116.300, 127.210
Rules for Building and Classing Steel Vessels, 1981
90.35–1; 91.15–1; 92.01–10
Rules for Building and Classing Steel Vessels, 1995
110.10–1; 110.15–1; 111.12–1(a); 111.12–3; 111.12–5; 111.12–7; 111.33–11; 111.35–1; 111.70–1(a); 111.105–39(a); 111.105–40(a); 111.105–47(a); 113.05–7; 119.410; 120.360; 127.210; 129.360
Rules for Building and Classing Steel Vessels, 1996
91.15–5(b); 110.15–1; 111.01–9; 111.12–1(a); 111.12–3; 111.12–5; 111.12–7; 111.33–11; 111.35–1; 111.70–1(a); 111.105–31(n); 111.105–39(a); 111.105–40(a); 113.05–7
Rules for Building and Classing Steel Vessels, 1998
91.15–5(b)
Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length, 1983
116.300; 127.210
Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways, 1995
116.300
Rules for Building and Classing Mobile Offshore Drilling Units, 1994
133.140; 133.150
U.S. Supplement to ABS Rules for Mobile Offshore Drilling Units, November 1, 1998
107.205(b)
U.S. Supplement to ABS Rules for Steel Vessels for Vessels on International Voyages, October 21, 1996
91.15–5(b)
U.S. Supplement to ABS Rules for Steel Vessels for Vessels on International Voyages, August 1, 1997
91.15–5(b)
American National Standards Institute (ANSI)
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI Z89.1–1969 Industrial Head Protection
108.497
ANSI A14.3–1974 Fixed Ladders
108.160
ANSI/ASME A17.1 Safety Code for Elevators and Escalators, 1993
110.10–1; 111.91–1
ANSI/ASME A17.1A Addenda to ANSI/ASME A–17–1 Safety Code for Elevators and Escalators (including Errata, 1995), 1994
110.10–1; 111.91–1
ANSI/IEEE C37.04–79 Rating Structure for AC High–Voltage Circuit Breakers Rated on a Symmetrical Current Basis
110.10–1; 111.54–1
ANSI C37.12 For AC High–Voltage Circuit Breakers Rated on a Symmetrical Current Basis–Specification Guide, 1991
110.10–1; 111.54–1(c)
ANSI C37.14–79 Low–Voltage DC Power Circuit Breakers Used in Enclosures
111.54–1(c)(2)
ANSI A17.1–1984, including supplements A17.1a–1985 and A17.1b–1985—Safety Code for Elevators and Escalators
120.540
ANSI B31.1—1986—Code for Pressure Piping, Power Piping
119.710; 128.240
ANSI Z26.1–1977, including 1980 supplement—Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways
116.1030; 127.430
American Petroleum Institute
1220 L Street NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
API RP2D with supplement 1—Recommended Practice for Operation and Maintenance of Offshore Cranes, 1972
107.259; 109.437; 109.521; 109.527
API Spec 2C, 2nd Ed. with supplement 2 Specification for Offshore Cranes, 1972
107.309; 108.601; 109.437
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME Boiler and Pressure Vessel Code Section V, Nondestructive Examination (1986)
98.01–3
ASME Boiler and Pressure Vessel Code, Section 1, Power Boilers, July 1989 w/1989 addenda
128.240
American Society for Nondestructive Testing (ASNT)
P.O. Box 21142, Columbus, OH 43221
Recommended Practice No. SNT–TC–1A (1988), Personnel Qualification and Certification in Nondestructive Testing
98.01–3
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
ASTM B 96–93, Standard Specification for Copper–Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
114.600; 119.440
ASTM B 117–73 (Reapproved 1979)—Method of Salt Spray (Fog) Testing
114.400
ASTM B 117–95 Standard Practice for Operating Salt Spray (FOG) Apparatus
110.10–1; 110.15–1(b)
ASTM B 117–97, Standard Practice for Operating Salt Spray (Fog) Apparatus
110.10–1; 110.15–1; 114.400; 114.600
ASTM B 122/B 122 M–95, Standard Specification for Copper–Nickel–Tin Alloy, Copper–Nickel–Zinc Alloy (Nickel Silver), and Copper–Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
114.600; 119.440
ASTM B 127–98, Standard Specification for Nickel–Copper Alloy (UNS NO4400) Plate, Sheet, and Strip
114.600; 119.440
ASTM B 152–97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
114.600; 119.440
ASTM B 209–96, Standard Specification for Aluminum and Aluminum–Alloy Sheet and Plate
114.600; 119.440
ASTM D 93–80 Standard Test Methods for Flash Point by Pensky–Martens Closed Cup Tester
128.310
ASTM D 93–94 Flash Point by Pensky–Martens Closed Cup Tester
114.400
ASTM D 93–94, Flash Point by Pensky–Martens Closed Cup Tester
108.101; 108.500
ASTM D 93–97, Standard Test Methods for Flash Point by Pensky–Martens Closed Cup Tester
97.01–2; 97.15–55; 108.101; 108.500; 114.400; 114.600; 125.180; 128.310
ASTM D 323–94, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
105.01–3; 105.10–15
ASTM D 635–91 Rate of Burning and/or Extent and Time of Burning of Self–Supporting Plastics in a Horizontal Position
119.440
ASTM D 635–97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
114.600; 119.440
ASTM D 789–78 Standard Specification for Nylon Injection Molding and Extrusion Materials
111.60–1(b)(4)
ASTM D 2863–91 Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index)
119.440
ASTM D 2863–95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index)
114.600; 119.440
ASTM D4066–94b Standard Specification for Nylon Injection and Extrusion Materials (PA), 1994
110.10–1; 111.60–1(c)
ASTM D 4066–96a, Standard Classification System for Nylon Injection and Extrusion Materials (PA)
110.10–1; 111.60–1
ASTM E 84–94 Surface Burning Characteristics of Building Materials
114.400; 116.422; 116.423
ASTM E 84–98, Standard Test Method for Surface Burning Characteristics of Building Materials
114.600; 116.405; 116.422; 116.423
ASTM E 648–94a Critical Radiant Flux of Floor–Covering Systems Using a Radiant Heat Energy Source
114.400; 116.423
ASTM E 648–97, Standard Test Method for Critical Radiant Flux of Floor–Covering Systems Using a Radiant Heat Energy Source
114.400; 114.600; 116.423
ASTM E 662–94a Specific Optical Density of Smoke Generated by Solid Materials
114.400; 116.423
ASTM E 662–97, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
114.400; 114.600; 116.423
ASTM F 1014–86 Standard Specification for Flashlights on Vessels
94.20–15(j); 96.35–3(c); 108.497(b)
ASTM F 1014–92, Standard Specification for Flashlights on Vessels
96.01–3; 96.35–5; 108.101; 108.497
ASTM F 1121–87 International Shore Connections for Marine Fire Applications
95.10; 108.427
ASTM F 1121–87 (1993), Standard Specification for International Shore Connections for Marine Fire Applications
95.01–2; 95.10–10; 108.101; 108.427
ASTM F 1196–89 Sliding Watertight Door Assemblies
92.01
ASTM F 1197–89 Sliding Watertight Door Control Systems
92.01
ASTM Adjunct F 1626 Symbols for Use in Accordance with Regulation II–2/20 of the 1974 SOLAS Convention As Amended PCN: 12–616260–01 (1996)
97.01–2; 97.36–1
ASTM Adjunct F 1626 Symbols for Use in Accordance with Regulation II–2/20 of the 1974 SOLAS Convention As Amended PCN: 12–616260–01 (1996)
109.105; 109.563
Coast Guard
Commandant [G–MVI], 2100 2nd St. SW., Washington, DC 20593
160.014—“Compass and Mounting dated Dec. 14, 1944” (Specification for Compasses: Magnetic, Liquid–filled, Mariners Compensating, for Lifeboats (with mounting) for Merchant Vessels), 1944
94.20–15
Department of Defense
DODSSP Standarization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111–5098
Federal Specifications:
  ZZ–H–451 Hose, Fire, Woven–jacketed Rubber or Cambric–Lined, with Couplings, F
95.10–10; 108.425
Military Specifications:
  MIL–C–915E–1972 (with 1980 Amend) Cable and Cord, Electrical, for Shipboard Use
111.60–1(a); 111.60–13(a)(4)
  MIL–C–24640A Military Specification Cables, Light Weight, Electric, Low Smoke, For Shipboard Use, General Specification For, 1995
110.10–1; 111.60–1(a); 111.60–3(c)
  MIL–C–24643A Military Specification Cables and Cords, Electric, Low Smoke, For Shipboard Use, General Specification for, 1994 (incl. Amendment 1)
110.10–1; 111.60–1(a); 111.60–3(c)
  MIL–M–15562F–1977 Matting or Sheet, Floor Covering, Insulating for High Voltage Application
111.30–11
  MIL–W–76D Military Specification Wire and Cable, Hook–up, Electrical, Insulated, General Specification for, 1992
110.10–1; 111.60–11(c)
  MIL–W–16878F Military Specification Wire, Electrical Insulated, General Specification for, 1982
110.10–1; 111.60–11(c)
  MIL–HDBK–299 (SH) Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable, 1989
110.10–1; 111.60–3(c)
Technical specifications:
  DDS 300–2 °C. Fault Current Calculations, 1988
110.10–1, 111.52–5
  DDS 304–2–1974 Electrical Cables, Ratings, and Characteristics
111.60–1(a)(3)
  DDS 9620–3–1962 AC Fault Current Calculations
111.52–5(b)
Instrument Society of America
400 Stanwix St., Pittsburgh, PA 15222
RP 12.6–1976 Installation of Intrinsically Safe Instrument Systems in Class I Hazardous Locations
111.105–15(b)(2)
International Association of Drilling Contractors (IADC)
PO Box 4287, Houston, TX 77210–4287
IADC–DCCS–1/1991, Guidelines for Industrial System DC Cable for Mobile Offshore Drilling Units, 1991
110.10–1; 111.60–1(f)
International Electrotechnical Commission (IEC)
Bureau Central de la Commission Electrotechnique Internationale, 3 rue de Varembe, Geneva, Switzerland
IEC 56, High–voltage alternating–current circuit breakers, Fourth Edition, 1987 (Including Amendment 1,1992; Amendment 2, 1995; and Amendment 3, 1996)
111.54–1
IEC 68–2–52, Basic Environmental Testing Procedures, Part 2: Tests. Test KB: Salt Mist, Cyclic (Sodium Chloride Solution), 1984
110.10–1; 110.15–1(b)
IEC 79–0, Electrical Apparatus for Explosive Gas Atmospheres, Part 0: General Requirements, 1983 (including Amendment 2, 1991)
110.10–1; 111.105–1; 111.105–3; 111.105–5; 111.105–7; 111.105–15(b); 111.105–17(b)
IEC 79–1, Electrical Apparatus for Explosive Gas Atmospheres, Part 1: Construction and Test of Flameproof Enclosures of Electrical Apparatus, 1990 [including First Supplement to the Second edition (1971), 1975 and Amendment 1 to the Third edition (1990), 1993]
110.10–1; 111.105–3; 111.105–5; 111.105–9; 111.105–15(b); 111.105–17(b)
IEC 79–2, Electrical Apparatus for Explosive Gas Atmospheres, Part 2: Electrical Apparatus—Type of Protection “p”, 1983
110.10–1; 111.105–3; 111.105–5; 111.105–7(b); 111.105–15(b); 111.105–17(b)
IEC 79–5, Electrical Apparatus for Explosive Gas Atmospheres, Part 5: Sand–Filled Apparatus. First Edition (1967) Incorporating the First Supplement, (1969)
110.10–1; 111.105–3; 111.105–5; 111.105–15(a); 111.105–15(b); 111.105–17(b)
IEC 79–6, Electrical Apparatus for Explosive Gas Atmospheres, Part 6: Oil–Immersion “o”, 1995
110.10–1; 111.105–3; 111.105–5; 111.105–15(a); 111.105–15(b); 111.105–17(b)
IEC 79–7, Electrical Apparatus for Explosive Gas Atmospheres, Part 7: Increased Safety “e”, 1990 (including Amendment 1, 1991 and Amendment 2, 1993)
110.10–1; 111.105–3; 111.105–5; 111.105–15(a); 111.105–15(b); 111.105–17(b)
EC 79–11, Electrical Apparatus for Explosive Gas Atmospheres, Part 11: Intrinsic Safety “I” 1991
110.10–1; 111.105–3; 111.105–5; 111.105–11(a); 111.105–15(b); 111.105–17(b)
IEC 79–15, Electrical Apparatus for Explosive Gas Atmospheres, Part 15: Electrical Apparatus with Type of Protection “n”, 1987
110.10–1, 111.105–3; 111.105–5; 111.105–15(a); 111.105–15(b); 111.105–17(b)
IEC 79–18, Electrical Apparatus for Explosive Gas Atmospheres, Part 18: Encapsulation “m”, 1992
110.10–1; 111.105–3; 111.105–5; 111.105–15(a); 111.105–15(b); 111.105–17(b)
IEC 92–3, Electrical Installation In Ships, Part 3: Cables (construction, testing and installations) Second Edition, 1965 as amended through August, 1994
110.10–1; 111.05–7; 111.60–1(a); 111.60–3(a); 111.60–3(c); 111.81–1(d)
IEC 92–101, Electrical Installations in Ships, Part 101: Definitions and General Requirements, 1994 (including Amendment 1, 1995)
110.10–1; 110.15–1(a); 111.81–1(d)
IEC 92–201, Electrical Installations in Ships, Part 201: System Design—General, 1994
110.10–1; 111.70–3(a); 111.81–1(d)
IEC 92–202, Electrical Installations in Ships, Part 202: System Design—Protection, 1994
110.10–1; 111.50–3(c); 111.50–3(e); 111.50–3(g); 111.53–1(a); 111.54–1(a); 111.81–1(d)
IEC 92–301, Electrical Installations in Ships, Part 301: Equipment—Generators and Motors, 1980 (including Amendment 1, 1994, and Amendment 2, 1995)
110.10–1; 111.25–5(a); 111.70–1(a); 111.81–1(d)
IEC 92–302, Electrical Installations in Ships, Part 302: Equipment—Switchgear and Controlgear Assemblies, 1980 (including Amendment 1, 1989 and Amendment 2, 1994)
110.10–1; 111.30–1; 111.30–5(a); 111.30–19(a); 111.81–1(d)
IEC 92–303, Electrical Installations in Ships, Part 303: Equipment—Transformers for Power and Lighting, 1980
110.10–1; 111.20–15; 111.81–1(d)
IEC 92–304, Electrical Installations in Ships, Part 304: Equipment—Semiconductor Convertors, 1980 (including Amendment 1, 1995)
110.10–1; 111.33–3(a); 111.33–5(b); 111.81–1(d)
IEC 92–306, Electrical Installations in Ships, Part 306: Equipment—Luminaires and Accessories, 1980
110.10–1; 111.75–20(a); 111.81–1(d)
IEC 92–350, Electrical Installations in Ships, Part 350: Low–voltage Shipboard Power Cables—General Construction and Test Requirements, 1988, Amendment 1 (1994)
110.10–1; 111.60–1
IEC 92–352, Electrical Installations in Ships, Part 352: Choice and Installation of Cables for Low–Voltage Power Systems, 1979, (with Amendment 1, 1987 and Amendment 2, 1994)
110.10–1; 111.60–3(a); 111.60–3(c); 111.60–5; 111.81–1(d)
IEC 92–353, Electrical Installations in Ships, Part 353: Single and Multicore Non–radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV (1995–01) Second edition
110.10–1; 111.60–1; 111.60–3
IEC 92–401, Electrical Installations in Ships, Part 401: Installation and Test of Completed Installation, 1980
111.05–9
IEC 92–501, Electrical Installations in Ships, Part 501: Special Features—Electric Propulsion Plant, 1984
110.10–1; 111.81–1(d)
IEC 92–502, Electrical Installations in Ships, Part 502: Tankers—Special Features, 1994
110.10–1; 111.81–1(d); 111.105–31(e)
IEC 92–503, Electrical Installations in Ships, Part 503: Special Features—A.C. Supply Systems with Voltages in the Range Above 1KV up to and including 11KV, 1975
110.10–1; 111.30–5(a); 111.81–1(d)
IEC 92–504, Electrical Installations in Ships, Part 504: Special Features—Control and Instrumentation, 1994
110.10–1; 111.81–1(d)
IEC 331, Fire Resisting Characteristics of Electric Cables, 1970
110.10–1; 113.30–25(i)
IEC 332–1, Tests on Electric Cables Under Fire Conditions, Part 1: Test on a Single Vertical Insulated Wire or Cable, 1993
110.10–1; 111.30–19(b)
IEC 332–3, Tests on Electric Cables Under Fire Conditions, Part 3: Test on bunched wires or cables, 1992
110.10–1; 111.60–1(b); 111.60–2; 111.60–6(a); 111.107–1(c)
IEC 363, Short–Circuit Current Evaluation with Special Regard to Rated Short–Circuit Capacity of Circuit–Breakers in Installations in Ships, 1972
110.10–1; 111.52–5(c)
IEC 529, Degrees of Protection Provided by Enclosures (IP Code), 1989
110.10–1; 111.01–9(a); 111.01–9(b); 111.01–9(c); 111.01–9(d); 111.01–9(Note); 113.10–7; 113.20–3; 113.25–11; 113.30–25(c); 113.30–25(h); 113.40–10(b)
IEC 533, Electromagnetic Compatibility of Electrical and Electronic Installations in Ships, 1977
110.10–1; 113.05–7
IEC 947–2, Low–Voltage Switchgear and Controlgear, Part 2: Circuit Breakers, 1989 (including Amendment 1, 1992 and Amendment 2, 1993)
110.10–1; 111.54–1(b); 111.54–1(c)
Institute of Electrical and Electronics Engineers
Service Center, 445 Hoes Lane, Piscataway, NJ 08855 Telephone: (800) 678–4333
Standard 45–1977 Recommended Practice for Electrical Installations on Shipboard
120.340; 125.180
IEEE C 37.13 IEEE Standard for Low–Voltage AC Power Circuit Breakers Used in Enclosures, 1990
111.54–1(c)
No. 27–1974 Switchgear Assemblies Including Metal–Enclosed Bus (ANSI/IEEE C 37.20–69 and Supplements)
110.30–23
IEEE Std C37.14 IEEE Standard for Low–Voltage DC Power Circuit Breakers Used in Enclosures, 1992
110.10–1; 111.54–1(c)
Institute of Electrical and Electronic Engineers (IEEE)
Service Center, 445 Hoes Lane, Piscataway, NJ 08855 Telephone: (800) 678–4333
IEEE Std 45–1983 IEEE Recommended Practice for Electric Installations on Shipboard, 1983
110.10–1; 111.05–7; 111.15–2(b); 111.30–1; 111.30–5(a); 111.30–19(a); 111.33–3(a); 111.33–5(a); 111.40–1; 111.60–1(a); 111.60–2; 111.60–3; 111.60–5(a); 111.60–6(a); 111.60–11(c); 111.60–13(a); 111.60–19(b); 111.60–21; 111.75–5(b); 111.105–3; 111.105–31(e); 111.105–41; 111.107–1(c); 113.65–5
IEEE Std 100–1992 The New IEEE Standard Dictionary of Electrical Terms, 1992
110.10–1; 110.15–1(a)
IEEE Std 320 Application Guide for AC High–Voltage Circuit Breakers Rated on a Symmetrical Current Basis (ANSI/IEEE C37.010–79), 1979
111.54–1(c); 110.10–1
IEEE Std 331 Application Guide for Low–Voltage AC Non–Integrally Fused Power Circuit Breakers (Using Separately Mounted Current–Limiting Fuses) (ANSI C37.27), 1987
111.54–1(c); 110.10–1
IEEE Std 383–1974 IEEE Standard for Type Test of Class IE Electric Cables, Field Splices, and Connections for Nuclear Power Generating Stations, 1974
110.10–1; 111.107–1(c)
No. 538–1976 Low–Voltage AC Integrally Fused Power Circuit Breakers (ANSI C37.13a–1975)
111.54–1(c)(1)(ii); 111.57–1 (Note)
IEEE Std 1202–1991 IEEE Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies, 1991
110.10–1; 111.60–2; 111.60–6(a)
International Maritime Organization (formerly Inter–Governmental Maritime Organization)
4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013. Telephone: (212) 962–4522; FAX: (212) 406–8420
Resolution A.264 (VIII)—Carriage of Grain, 1973
93.20–05
Resolution A.654 (XVI) Graphical Symbols for Fire Control Plans, October 19, 1989
97.01–2; 97.36–1
Resolution A.520(13), Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life–saving Appliances and Arrangements, 17 November 1983
108.101; 108.105
Resolution A.649(16), Code for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code), October 19, 1989 with Amendments of June, 1991
181.108; 181.503
Resolution A.658(16), Use and Fitting of Retro–reflective Materials on Life–saving Appliances, 20 November, 1989
108.101; 108.645; 108.649
Resolution A.760(18), Symbols Related to Life–saving Appliances and Arrangements, 17 November, 1993
108.101; 108.646; 108.647; 108.649; and 108.655
International Convention for the Safety of Life at Sea (SOLAS), Consolidated Edition, 1992
126.170
Resolution A.520(13), dated November 17, 1983—Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life–Saving Appliances and Arrangements
114.540; 125.180; 133.40
Resolution A.658(16), dated November 20, 1989—Use and Fitting of Retro–Reflective Materials on Life–Saving Appliances
122.604; 131.855; 131.875
Resolution A.688(17), dated November 6, 1991—Fire Test Procedures For Ignitability Bedding Components
116.405(j)
Resolution A.760(18), dated November 17, 1993—Symbols Related to Life–Savings Appliances and Arrangements
122.604(g); 131.875
International Convention for the Safety of Life at Sea, 1974 (SOLAS 74) Consolidated Edition, (Including 1992 Amendments to SOLAS 74, and 1994 Amendments to SOLAS 74), 1992
110.10–1; 111.105–47(b); 112.15–1(r); 113.25–6(d)
The International Society for Measurement and Control (ISA)
67 Alexander Drive, PO Box 12277, Research Triangle Park, NC 27709
Resolution A.654 (XVI) Graphical Symbols for Fire Control Plans, October 19, 1989
109.105; 109.563
RP 12.6, Wiring Practices for Hazardous (Classified) Locations Instrumentation Part I: Intrinsic Safety, 1995
110.10–1; 111.105–11(e)
Lloyd's Register of Shipping (LF)
100 Leadenhall Street, London, ECA 3BP
Rules and Regulations for the Classification of Ships, 1998
91.15–5(b)
Lloyd's Register of Shiping Supplemental Requirements, 1998
91.15–5(b)
National Electrical Manufacturers Association
1300 North 17th Street, Suite 1847, Rosslyn, VA 22209; Telephone: (703) 841–3200; FAX: (703) 841–3300
NEMA Standards Publication No. ICS 2, Industrial Control and Systems Controllers, Contactors, and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC, 1993
110.10–1; 111.70–3(a)
NEMA Standards Publication No. 2.3 1983, Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers, 1983
110.10–1; 111.70–3(a)
NEMA Standards Publication No. 2.4, NEMA and IEC Devices for Motor Service—A Guide for Understanding the Differences, 1989
110.10–1; 111.70–3(a).
NEMA Standards Publication No. 250, Enclosures for Electrical Equipment (1000 Volts Maximum), 1991
110.10–1; 111.01–9(a); 111.01–9(b); 111.01–9(c); 111.01–9(d); 111.01–9(Note); 111.10–7; 113.20–3; 113.25–11; 113.30–25(c); 113.30–25(h); 113.40–10(b)
NEMA Standards Publication No. WC–3, Rubber–Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy, 1980 (with revisions through May 1989)
110.10–1; 111.60–13(a); 111.60–13(c)
NEMA Standards Publication No. WC–8, Ethylene–Propylene–Rubber–Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy, 1988 (with revisions through 1992)
110.10–1; 111.60–13(a); 111.60–13(c)
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
306—Control of Gas Hazards on Vessels, 1980
91.50–1
306—Control of Gas Hazards on Vessels, 1980
109.573
407—Standard for Aircraft Fuel Servicing, 1980
108.239
496—Standard for Purged and Pressurized Enclosures for Electrical Equipment in Hazardous Locations, 1974
108.187
NFPA 13–1996 Standard for the Installation of Sprinkler Systems
95.01–2; 95.30–1; 108.101; 108.430
No. 56A–1973 Standard for the Use of Inhalation Anesthetics
111.105–37
NFPA 70 The National Electric Code, 1997
110.10–1; 111.05–33; 111.20–15; 111.25–5(a); 111.30–19(d), (f)(1); 111.50–3; 111.50–9; 111.53–1(a); 111.54–1(a); 111.55–1(a); 111.59–1; Table 111.60–7; 111.60–11(f); 111.60–13; 111.81–1(d); 111.83–3(a); 111.105–1(Note); 111.105–3; 111.105–5; 111.105–7; 111.105–9; 111.105–17(b); 111.107–1(b)
NFPA 77 Recommended Practice on Static Electricity, 1993
110.10–1; 111.105–27
NFPA 99 Standard for Health Care Facilities, 1997
110.10–1; 111.105–37
NFPA 496 Standard for Purged and Pressurized Enclosures for Electrical Equipment, 1993
110.10–1; 111.105–7(b)
NFPA 10–1994—Portable Fire Extinguishers
115.810; 132.350
NFPA 13–1994—Installation of Sprinkler Systems
116.439
NFPA 13–1996—Installation of Sprinkler Systems
114.600; 116.439
NFPA 17–1994—Dry Chemical Extinguishing Systems
118.425
NFPA 17A–1994—Wet Chemical Extinguishing Systems
118.425
NFPA 70–1993—National Electrical Code (NEC)
120.320; 120.340; 120.370; 129.320; 129.340; 129.370
NFPA 92B–1991—Smoke Management Systems in Malls, Atria, and Large Areas
116.440
NFPA 92B–1995—Smoke Management Systems in Malls, Atria, and Large Areas
114.600; 116.440
NFPA 261–1994—Test for Determining Resistance of Mock–up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
114.400; 116.423
NFPA 302–1994—Pleasure and Commercial Motor Craft, Chapter 6
121.200; 121.240; 129.550
NFPA 306–1993—Control of Gas Hazards on Vessels
115.710; 126.160
NFPA 701–1989—Fire Tests for Flame–Resistant Textiles and Films
116.423
NFPA 701–1996—Fire Tests for Flame–Resistant Textiles and Films
114.600; 116.423
NFPA 1963–1993—Fire Hose Connections
118.320; 132.130
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
UL 19–78 Woven–jacketed, Rubber Lined Fire Hose
95.10–10; 108.425
UL 20–79 General Use Snap Switches
111.55–7
UL 44 Standard for Rubber–Insulated Wire and Cable, 1991 (revisions through February, 1996)
110.10–1; 111.60–11(c)
UL 50 Standard for Enclosures for Electrical Equipment, 1995
110.10–1; 111.81–1
UL 62 Standard for Flexible Cord ad Fixture Wire, 1991 (revisions through February, 1996)
110.10–1; 111.60–13(a)
UL 67–79 (revisions and MSs through Nov. 1979) Panelboards
111.40–1
UL 73–81 Motor Operated Applicances
111.77–5(a)
UL 83 Standard for Thermoplastic–Insulated Wires and Cables, 1991 (with revisions through March, 1996)
110.10–1; 111.60–1(c); 111.60–11(c)
UL 98–74 (revisions and MSs through July 1980) Enclosed Switches
111.55–9
UL 104–73 Elevator Door Locking Devices and Contacts
111.91–3
UL 197–78 (revisions and MSs through Nov. 1979) Commercial Electric Cooking Applicances
111.77–3(a)
UL 250–79 (revisions through Apr. 1979) Household Refrigerators and Freezers
111.77–9
UL 347–79 High–Voltage Industrial Control Equipment
111.70–3(d)
UL 363–80 Knife Switches
111.55–5
UL 399–78 (revisions thorugh Apr. 1980) Drinking Water Coolers
111.77–11
UL 471–78 (revisions through Apr. 1980) Commercial Refrigerators and Freezers
111.77–9
UL 486A–78 Electric Wire Connectors and Soldering Lugs for Use With Copper Conducters
111.60–17(d); 111.60–19(b)(1)
UL 489 Standard for Molded Case Circuit–Breakers and Circuit–Breakers Enclosures, 1991 (revisions through June, 1995)
110.10–1; 111.01–15(c); 111.54–(b); 111.54–1(b)
UL 498–79 (revisions through Jan. 1979) Electrical Attachment Plugs and Attachment Plugs and Receptacles
111.79–1(d)
UL 508–77 (revisions and MSs through Jan. 1981) Electric Industrial Control Equipment
111.70–3(d)
UL 514A Standard for Metallic Outlet Boxes, 1991 (revisions through April, 1995)
110.10–1; 111.81–1
UL 514B Standard for Fittings for Conduit and Outlet Boxes, 1989 (revisions through April, 1995)
110.10–1; 111.81–1
UL 514C Standard for Nonmetallic Outlet Boxes, Flush–Device Boxes, and Covers, 1988 (revisions through April, 1995)
110.10–1; 111.81–1
UL 595 Standard for Marine–Type Electric Lighting Fixtures, 1985 (revisions through September, 1991)
110.10–1; 111.75–20(a), (e)
UL 749–78 (revisions through Dec. 1979) Household Electric Dishwashers
111.77–7
UL 845–80 Electric Motor Control Centers
111.70–3(d)
UL 857–80 Busways and Associated Fittings
111.59–1(b)
UL 913, Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations, 1988
110.10–1; 111.105–11(a)
UL 921–78 (revisions through Oct. 1980) Commercial Electric Dishwashers
111.77–7
UL 924–79 (revisions through Feb. 1979) Emergency Lighting Equipment
112.39–1(a)(4)
UL 1025–80 (revisions and MSs through Nov. 1980) Electric Air Heaters
111.87–3(a)
UL 1042 Standard for Electric Baseboard Heating Equipment, 1994 (revisions through November 1995)
110.10–1; 111.87–3(a)
UL 1072, Standard for Medium–Voltage Power Cables, 1995 (revisions through January, 1996)
110.10–1; 111.60–1(e)
UL 1096, Standard for Electric Central Air Heating Equipment, 1986 (revisions through January, 1988)
110.10–1; 111.87–3(a)
UL 1104 Standard for Marine Navigation Lights, 1981 (revisions through May 1988)
110.10–1; 111.75–17(d)
UL 1203, Standard for Explosion–Proof and Dust–Ignition–Proof Electrical Equipment for Use in Hazardous (Classified) Locations, 1994 (revisions through October 1995)
110.10–1; 111.105–9
UL 1236–78 (revisions and MSs through Feb. 1980) Electric Battery Chargers
111.15–30
UL 1309, Standard for Marine Shipboard Cable, July 14, 1995
110.10–1; 111.60–1; 111.60–3
UL 1569, Standard for Metal–Clad Cables, 1995 (including revisions through April, 1996)
110.10–1; 111.60–23(a)
UL 1570, Standard for Florescent Lighting Fixtures, 1988 (revisions through April, 1996)
110.10–1; 111.75–20
UL 1571, Standard for Incandescent Lighting Fixtures, 1995 (revisions through April, 1996)
110.10–1; 111.75–20
UL 1572, Standard for High Intensity Discharge Lighting Fixtures, 1995 (including revisions through May, 1996)
110.10–1; 111.75–20
UL 1573, Standard for Stage and Studio Lighting Units, 1994 (revisions through February, 1995)
110.10–1; 111.75–20
UL 1574, Standard for Track Lighting Systems, 1995 (revisions through July, 1995)
110.10–1; 111.75–20
ANSI/UL 1581, Reference Standard for Electrical Wires, Cables, and Flexible Cords, 1991 (revisions through January, 1996)
110.10–1; 111.30–19(b); 111.60–2; 111.60–6(a)
UL 19–1992—Lined Fire Hose and Hose Assemblies
118.320; 132.130
UL 57–1976 Electric Lighting Fixtures
129.410
UL 174–1989, as amended through June 23, 1994—Household Electric Storage Tank Water Heaters
119.320
UL 486A–1992—Wire Connectors and Soldering Lugs for Use With Copper Conductors
120.340; 129.340
UL 489–1995—Molded—Case Circuit Breakers and Circut Breaker Enclosures
120.380; 129.380
UL 595–1991—Marine Type Electric Lighting Fixtures
120.410; 129.410
UL 710–1990, as amended through Sept. 16, 1993—Exhaust Hoods for Commercial Cooking Equipment
118.425
UL 723–1993, as amended through April 20, 1994—Test for Surface Burning Characteristics of Building Materials
114.400; 116.422; 116.423; 116.425
UL 1056–1989—Fire Test of Upholstered Furniture
116.423
UL 1058–1989, as amended through April 19, 1994—Halogenated Agent Extinguishing System Units
118.410
UL 1102–1992—Non integral Marine Fuel Tanks
119.440
UL 1104–1981, as amended through May 4, 1988—Marine Navigation Lights
120.420
UL 1110–1988, as amended through May 16, 1994—Marine Combustible Gas Indicators
119.480
UL 1453–1988, as amended through June 7, 1994—Electric Booster and Commercial Storage Tank Water Heaters
119.320
UL 1570–1995—Fluorescent Lighting Fixtures
120.410; 129.410
UL 1571–1995—Incandescent Lighting Fixtures
120.410; 129.410
UL 1572–1995—High Intensity Discharge Lighting Fixtures
120.410; 129.410
UL 1573–1995—Stage and Studio Lighting Units
120.410; 129.410
UL 1574–1995—Track Lighting Systems
120.410; 129.410

 



For questions or comments regarding e-CFR editorial content, features, or design, email ecfr@nara.gov.
For questions concerning e-CFR programming and delivery issues, email webteam@gpo.gov.