About GPO   |   Newsroom/Media   |   Congressional Relations   |   Inspector General   |   Careers   |   Contact   |   askGPO   |   Help  
 
Home   |   Customers   |   Vendors   |   Libraries  

The Electronic Code of Federal Regulations (e-CFR) is a regularly updated, unofficial editorial compilation of CFR material and Federal Register amendments produced by the National Archives and Records Administration's Office of the Federal Register (OFR) and the Government Printing Office.

Parallel Table of Authorities and Rules for the Code of Federal Regulations and the United States Code
Text | PDF

Find, review, and submit comments on Federal rules that are open for comment and published in the Federal Register using Regulations.gov.

Purchase individual CFR titles from the U.S. Government Online Bookstore.

Find issues of the CFR (including issues prior to 1996) at a local Federal depository library.

[2]
 
 

Electronic Code of Federal Regulations

blue pill

e-CFR Data is current as of December 18, 2014

Title 24—Housing and Urban Department
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.

24 CFR (PARTS 200 TO 499)
DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT, OFFICE OF ASSISTANT SECRETARY FOR HOUSING–FEDERAL HOUSING COMMISSIONER
24 CFR
The following publications are incorporated by reference in the HUD Minimum Property Standards (MPS) in 24 CFR part 200, subpart S. The MPS are available for public inspection and can be obtained for appropriate use at 490 L’Enfant Plaza East, Suite 3214, or at each HUD Regional, Area, and Service Office. Copies are available for inspection at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC. The individual standards referenced in the MPS are available at the address contained in the following table. They are also available for public inspection at the HUD, Manufactured Housing and Construction Standards Division, Suite 3214, 490 L’Enfant Plaza East, Washington, DC 20024.

MINIMUM PROPERTY STANDARDS I:

American Architectural Manufacturers Association
1827 Walden Office Square, Suite 104, Schaumburg, IL 60173
AAMA/NWWDA 101/I.S. 2-1997 Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
200.955(a)(1)
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME/ANSI A17.1–87 Safety Code for Elevators and Escalators Including the A17.1b–89 Addenda
200.925b
Building Officials and Code Adminstrators International, Inc.
4051 West Flossmoor Road, Country Club Hills, Illinois 60478
BOCA National Building Code, 1993 Edition, including the Appendices of the Code, but excluding Chapter I, Administration, and the references to fire retardant-treated wood and a distance of 4 feet (1219 mm) from the wall in exception number 1 of paragraph 705.6 and 707.5.2 number 2 (Chapter 7)
200.925c
BOCA National Plumbing Code, 1993 Edition, including the Appendices of the Code, but excluding Chapter I, Administration
200.925c
BOCA National Mechanical Code, 1993 Edition, including the Appendices of the Code, but excluding Chapter I, Adminstration
200.925c
Council of American Building Officials
5203 Leesburg Pike, suite 708, Falls Church, VA 22041, Telephone (703) 931–4533
CABO One and Two Family Dwelling Code, 1992 edition with Errata Package and 1993 Amendments
200.926b
CABO Model Energy Code, 1992 Edition, Residential Buildings, including the Appendix, but excluding Sections 101.3.1, 101.3.2 (except that Section 101.3.2.2, Historic Building is included), 104, and 105
200.926d
Department of Housing and Urban Development, Manufactured Housing and Construction Standards Division
451 Seventh Street, SW, Mail Room B–133, Washington, DC 20410, Telephone (202) 755–7440
HUD Handbook: MPS for Housing 4910.1, 1993 Edition
200.926d; 200.929
HUD intermediate MPS Supplement 4930.2 Solar Heating and Domestic Hot Water Systems, 1989 edition
200.926d
International Conference of Building Officials
5360 South Workman Mill Road, Whittier, California 90601
Uniform Building Code, 1991 Edition, including the 1993 Accumulative Supplement and the Appendix of the Code, but excluding Part I—Administrative, and the reference to fire retardant treatment plywood in section 2504(c)3, and to fire retardant treated wood in 1–HR type III and V construction referenced in paragraph 4203.2
200.925c
Uniform Plumbing Code, 1991 Edition, including the 1992 Code Changes, but excluding Part I—Administration, but including the Appendices of the Code
200.925c
Uniform Mechanical Code, 1991 Edition, including the 1993 Accumulative Supplement, but excluding Part I—Administrative, but including the Appendices of the Code
200.925c
National Association of Plumbing-Heating Cooling Contractors
P.O. Box 6808, Falls Church, VA 22046, Telephone (703) 237–8100
National Standard Plumbing Code—1993
200.925c
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344-3555
NFPA 70–1993, The National Electrical Code
200.925c
NFPA 70A–1990, Electrical Code for 1- and 2-Family Dwellings
200.926b; 200.926c
Southern Building Code Congress International, Inc.
900 Montclair Road, Birmingham, Alabama 35213
Standard Building Code, 1991 Edition, including 1992/1993 revisions, including Appendices A, C, E, J, K, M, and R of the Code, but excluding Chapter I—Administration, and the phrase “or fire retardant treated wood” in reference note (a) of table 600 (Chapter 6) of the Code
200.925c
Standard Gas Code, 1991 Edition, including the 1992 revisions, including Appendices A, C, E, J, K, M, and R of the Code, but excluding Chapter I—Administration
200.925c
Standard Mechanical Code, 1991 Edition, including 1992 revisions, including Appendices A, C, E, J, K, M, and R of the Code, but excluding Chapter I—Administration
200.925c
Standard Plumbing Code, 1991 Edition, including Appendices A, C, E, J, K, M, and R of the Code, but excluding Chapter I—Administration
200.925c

MINIMUM PROPERTY STANDARDS II:

American Society of Civil Engineers
345 E. 47th Street, New York, NY 10017
ASCE 7–93, Minimum Design Loads for Buildings and Other Structures
200.946
American Association of Textile Chemists and Colorists
P.O. Box 12215, Research Triangle Park, NC 27709
AATCC Test Method 16e–82 Colorfastness to Light: Water-Cooled Xenon-Arc Lamp, Continuous Light
200.945
AATCC Test Method 165–86 Colorfastness to Crocking: Carpets-AATCC Crock Meter Method
200.945
American National Standards Institute/American Architectural Manufacturers Association
11 West 42nd Street, New York, NY 10036 Telephone: (212) 642–4900 (ANSI), 1540 East Dundee Rd., Suite 310, Palatine, IL 60067 (AAMA)
ANSI A208.1-1993 Particleboard, Grade M-3
200.955(a)(1)
ANSI/AAMA 101–93 Voluntary Specifications for Aluminum and Poly (vinyl/chloride) (PVC) Prime Windows and Glass Doors
200.938; 200.941
ANSI/AAMA 1102.7–89 Voluntary Specifications for Aluminum Storm Doors
200.938
ANSI/AAMA 1002.10–93 Voluntary Specifications for Insulating Storm Products for Windows and Sliding Glass Doors
200.938
AAMA 1600–90 Voluntary Specification for Skylights
200.938
American Society for Quality Control
611 East Wisconsin Ave., Milwaukee, WI 53202
ASQC Q9000-1-1994 Quality Management and Quality Assurance Standards Guidelines for Selection and Use
200.935(d)(4)(ii)
ASQC Q9001-1994 Quality Systems-Model for Quality Assurance in Design, Development, Production, Installation, and Servicing
200.935(d)(4)(ii)
ASQC Q9002-1994 Quality Systems-Model for Quality Assurance in Production, Installation, and Servicing
200.935(d)(4)(ii)
ASQC Q9003-1994 Quality Systems-Model for Quality Assurance in Final Inspection and Test
200.935(d)(4)(ii)
ASQC Q9004-1-1994 Quality Management and Quality System Elements-Guidelines
200.935(d)(4)(ii)
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
ASTM C 150–94, Standard Specification for Portland Cement
200.946
ASTM C 578–87a, Standard Specification for Preformed, Cellular Polystyrene Thermal Insulation
200.946
ASTM C 578–92, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
200.946
ASTM C 920–87, Standard Specificiation for Elastomeric Joint Sealants
200.946
ASTM C 1186–91, Standard Specification for Flat Non-Asbestos Fiber Cement Sheets
200.946
ASTM D418–92, Standard Test Methods for Tuft and Yarn Length of Uncoated Floor Coverings
200.945
ASTM D579–90, Standard Specifications for Greige Woven Glass Fabrics
200.946
ASTM D629–88, Standard Test Methods for Quantitative Analysis of Textiles
200.947
ASTM D1335–67 (Reapproved 1972) Standard Test Method for Tuft Bind of Pile Floor Coverings
200.945
ASTM D 1667–76 (Reapproved 1990) Standard Specification for Flexible Cellular Materials—Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
200.947
ASTM D 2646–87, Standard Test Methods for Backing Fabrics
200.945; 200.947
ASTM D 3168–73 (Reapproved 1979), Standard Recommended Practices for Qualitative Identification of Polymers in Emulsion Paints
200.946
ASTM D 3273–86, Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
200.946
ASTM D 3498-93 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
200.954(a)(1)
ASTM D 3574–91, Standard Test Methods for Flexible Cellular Materials-Slab, Bond and Molded Urethane Forms
200.945; 200.947
ASTM D 3676–78 (Reapproved 1989) Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
200.945; 200.947
ASTM D 3936–80, Standard Test Method for Delamination Strength of Secondary Backing of Pile Floor Coverings
200.945
ASTM D 4099–89, Standard Specification for Poly (vinyl chloride) (PVC) Prime Windows/Sliding Glass Doors
200.941
ASTM E 108–90, Standard Test Methods for Fire Tests of Roof Coverings
200.946
ASTM E 330–90, Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference
200.946
ASTM E 606–80, Standard Recommended Practice for Constant-Amplitude Low-Cycle Fatigue Testing
200.946
ASTM E 695–79 (Reapproved 1991), Standard Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading
200.946
ASTM E–774–92, Standard Specification for Sealed Insulating Glass Units
200.940
ASTM F476–84 (Reapproved 1991) Standard Test Methods for Security of Swinging Door Assemblies
200.948
ASTM G 26–93, Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
200.946
The Council of America Building Officials
5203 Leesburg Pike, Falls Church, Virginia 22041
Council of American Building Officials Model Energy Code, 1993 Edition
200.946
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111-5098
Military specifications:
  MIL–STD–8108B, Method 508, Fungus, 15 June 1967
200.946
  MIL–Y–1140H, Military Specification, Yarn, Cord, Sleeving, Cloth, and Tape-Glass, 13 December 1972
200.946
Exterior Insulation Manufacturers Association
2759 State Road 580, Suite 112, Clearwater, Florida 34621
EIMA Test Method 101.01–95 (modified ASTM C 67–91), Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS), Class PB
200.946
EIMA Test Method 101.02–95 (modified ASTM E 331–91), Standard Test Method for Resistance to Water of Exterior Insulation and Finish Systems (EIFS), Class PB
200.946
EIMA Test Method 101.03–95 (modified ASTM C 297–91), Standard Test Method for Determining the Tensile Adhesion Strength of an Exterior Insulation and Finish System (EIFS), Class PB
200.946
EIMA Test Method and Standard 101.86, Standard Test Method for Resistance of Exterior Insulation Finish Systems to the Effects of Rapid Deformation (Impact), October 4, 1991
200.946
EIMA Test Method 105.01–95, Standard Test Method for Alkali Resistance of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS), Class PB
200.496
European Union of Agreement Technical Committee
84 Avenue Jesu Jaunes, B.P. 02–77421, Marne-LA-Valee Cedex 2, Paris, France
UEATC Directives for the Assessment of External Insulation Systems for Walls (expanded Polystyrene Insulation Faced with a Thin Rendering), 1988, section 3.3.3.3
200.946
General Services Administration, Office of Standards and Quality Control
18th and F Street, Washington, DC 20406
TT–C–555B, Amendment–1, Federal Specification, Coating, Textured (For Interior and Exterior Masonry Surfaces), August 5, 1975
200.946
Insulated Steel Door Systems Institute
712 Lakewood Center North, 14600 Detroit Ave., Cleveland, OH 44107
ISDSI–100–90 Door Size Dimensional Standard and Assembly Tolerances for Insulated Steel Door Systems
200.948
ISDSI–101–83 (Reapproved 1989) Air Infiltration Performance Standard for Insulated Steel Door Systems
200.948
ISDSI–102–84 Installation Standard for Insulated Steel Door Systems
200.948
ISDSI–104–86 Water Penetration Performance Standard for Insulated Steel Door Systems
200.948
ISDSI–105–80 Test Procedure and Acceptance Criteria for Physical Endurance for Steel Doors and Hardware Reinforcings
200.948
ISDSI–106–80 Test Procedure and Acceptance Criteria for Prime Painted Steel Surfaces for Steel Doors and Frames
200.948
ISDSI–107–80 Thermal Performance Standard for Insulated Steel Door Systems
200.948
National Wood Windows and Door Association
1400 East Touhy Avenue, Suite 470, Des Plains, IL 60018 Telephone: (847) 299-5200
NWWDA Industry Standard I.S. 2–93 Wood Windows
200.939
NWWDA Industry Standard I.S. 3–88 Wood Sliding Patio Doors
200.939
Solar Rating and Certification Corporation
777 North Capitol St, NE., Suite 805, Washington, DC 20002
SRCC Document OG–300–93, Operating Guidelines and Minimum Standards for Certifying Solar Water Heating Systems; An Optional SWH System Certification and Rating Program (except for section 10)
200.949

MINIMUM PROPERTY STANDARDS III:

American Association of Textile Chemists and Colorists
P.O. Box 12215, Research Triangle Park, NC 27709
AATCC 20A–81 Fiber Analysis: Quantitative
200.942
AATCC 16E–82 Colorfastness to Light: Water-Cooled Xenon-Arc Lamp, Continuous Light
200.942
AATCC 8–85 Colorfastness to Crocking: AATCC Crockmeter Method
200.942
AATCC 24–85 Insect, Resistance to Textiles to
200.942
American National Standards Institute
11 West 42nd Street, New York, NY 10036 Telephone: (212) 642–4900
ANSI Z124.1–80 Plastic Bathtub Units
200.937
ANSI Z124.2–80 Plastic Shower Receptors and Stalls
200.937
ANSI Z124.3–80 Plastic Lavatories
200.937
ANSI Z124.4–83 Plastic Water Closet Bowls and Tanks
200.937
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
ASTM D297–81 Standard Methods for Rubber Products—Chemical Analysis
200.942
ASTM D418–82 Standard Methods of Testing Pile Yarn Floor Covering Construction
200.942
ASTM D1335–67 (Reapproved 1972), Standard Test Method for Tuft Bind of Pile Floor Covering
200.942
ASTM D2646–79 Standard Method of Testing Backing Fabrics
200.942
ASTM D3676–78 (Reapproved 1983), Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
200.942
ASTM D3936–80 Standard Test Method for Delamination Strength of Secondary Backing of Pile Floor Covering
200.942
ASTM E648–78 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
200.942
Department of Commerce
National Institute of Standards and Technology (formerly the National Bureau of Standards), Washington, DC 20234
DOC FF–1–70 Standard Test Method for Flammability of Finished Textile Floor Covering Materials (ASTM D2859–76)
200.942
Department of Commerce
National Institute of Standards and Technology, Office of Voluntary Product Standards, Gaithersburg, MD 20899
Voluntary Product Standard PS 20-94, American Softwood Lumber Standard
200.943(a)(1)
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344-3555
NFPA 501 BM–1976 Mobile Home Heating, Cooling Load Calculations
203.43f

MINIMUM PROPERTY STANDARDS FOR MULTIFAMILY DWELLINGS:

Air Conditioning Contractors of America
1513 16th Street, NW, Washington, DC 20036, (202) 483–9370
Load Calculation for Residential Winter and Summer Air Conditioning, Manual J 1986
Part 200, Appendix A
Aluminum Association
900 19th Street, NW, Washington, DC 20006, Telephone (202) 862–5100
AA–ASM 35–80 Specifications for Aluminum Sheet Metal Work in Building Construction
Part 200, Appendix A
American Architectural Manufacturers Association
1540 East Dundee Road, Paletine, IL 60067, Telephone (708) 202–1350
AAMA–800–92 Voluntary Specifications and Test Methods for Sealants
Part 200, Appendix A
AAMA–1503.1–88 Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections
Part 200, Appendix A
AAMA 1504–88 Voluntary Standards for Thermal Performance of Windows, Doors and Glazed Wall Sections
Part 200, Appendix A
American Concrete Institute
P.O. Box 19150, Redford Station, Detroit, Michigan 48219, Telephone (313) 532–2600
ACI 211.1–89 Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete
Part 200, Appendix A
ACI 211.2–91 Standard Practice for Selecting Proportions for Structural Lightweight Concrete
Part 200, Appendix A
ACI 213R–87 Guide for Structural Lightweight Aggregate Concrete
Part 200, Appendix A
ACI 301–89 Specifications for Structural Concrete for Buildings
Part 200, Appendix A
ACI 302.1R–80 Guide for Concrete Floor and Slab Construction
Part 200, Appendix A
ACI 304R–89 Guide for Measuring, Mixing, Transporting and Placing Concrete
Part 200, Appendix A
ACI 305R–77 Hot Weather Concreting (Revised 1989)
Part 200, Appendix A
ACI 306R–78 Cold Weather Concreting (Revised 1988)
Part 200, Appendix A
ACI 311.4R–80 Guide for Concrete Inspection (Revised 1988)
Part 200, Appendix A
ACI 315–80 Guide for Detailing of Concrete Reinforcement
Part 200, Appendix A
ACI 318–89 Building Code Requirements for Reinforced Structural Plain Concrete (Revised 1992)
Part 200, Appendix A
ACI 322–72 Structural Plain Concrete
Part 200, Appendix A
ACI 347–78 Recommended Practice for Concrete Formwork (Reapproved 1984)
Part 200, Appendix A
ACI 504R–77 Guide to Joint Sealants for Concrete Structures
Part 200, Appendix A
ACI 506–90 Recommended Practice for Shotcreting
Part 200, Appendix A
ACI 515.1R–79 A Guide to the Use of Waterproofing, Dampproofing, Protective and Decorative Barrier Systems for Concrete (Revised 1985)
Part 200, Appendix A
ACI 533.1R–69 Quality Standards and Tests for Precast Concrete Wall Panels
Part 200, Appendix A
ACI 533.2R–69 Selection and Use of Materials for Precast Concrete Wall Panels
Part 200, Appendix A
ACI 533.3R–70 Fabrication, Handling and Erection of Precast Concrete Wall Panels
Part 200, Appendix A
American Forest & Paper Association, (formerly National Forest Products Association)
1250 Connecticut Ave., NW, Washington, DC 20036
National Design Specification for Wood Construction—1991
Part 200, Appendix A
American National Standards Institute
11 West 42nd Street, New York, NY 10036, Telephone (212) 642–4900
ANSI A108.1A–92 Specifications for Installation of Ceramic Tile, in the Wet Set Method with Portland Cement Mortar
Part 200, Appendix A
ANSI A137.1–1988 Specifications for Ceramic Tile
Part 200, Appendix A
ANSI/BHMA A156.2–1989 Standard for Bored and Preassembled Locks and Latches
Part 200, Appendix A
ANSI/NKCA A161.1–1985 Recommended Performance and Construction Standards for Kitchen and Vanity Cabinets (Approved March 18, 1986)
Part 200, Appendix A
ANSI A208.1–1989 Wood Particleboard
Part 200, Appendix A
ANSI/AAMA 101–1988 Voluntary Specifications for Aluminum Prime Windows and Sliding Glass Doors
Part 200, Appendix A
ANSI/AAMA 1002.10–1983 Voluntary Specifications for Aluminum Insulating Storm Products for Windows and Sliding Glass Doors
Part 200, Appendix A
ANSI/AAMA 1102.7–1989 Voluntary Specifications for Aluminum Insulating Storm Products for Windows and Sliding Glass Doors
Part 200, Appendix A
ANSI/AAMA 1402–1986 Standard Specifications for Aluminum Siding, Soffit and Fascia (ANSI Approved 1989)
Part 200, Appendix A
ANSI/ACI 214–77 Recommended Practice for Evaluation of Strength Test Results of Concrete (Reapproved 1983)
Part 200, Appendix A
ANSI/AHA A135.4–1982 Basic Hardboard (Reaffirmed 1988)
Part 200, Appendix A
ANSI/AHA A135.6–1990 Hardboard Siding
Part 200, Appendix A
ANSI/AHA A194.1–1985 Cellulosic Fiber Board
Part 200, Appendix A
ANSI/APA 1–1984 Mosaic-Parquet Hardboard Slat Flooring
Part 200, Appendix A
ANSI/NSPI–1–91 Standard for Public Swimming Pools
Part 200, Appendix A
ANSI Z34.1–1987 American National Standard for Certification, Third-Party Certification Program
Part 200, Appendix A
ANSI Z124.5–1989 American National Standard for Plastic Toilet Seats (Water Closet Seats)
Part 200, Appendix A
American Society of Civil Engineers
345 East 47th Street, New York, NY 10017
ASCE 7–88 Minimum Design Loads for Buildings and Other Structures (formerly ANSI A58.1)
Part 200, Appendix A
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME/ANSI A17.1–87 Safety Code for Elevators and Escalators Including the A17.1b–89 Addenda
Part 200, Appendix A
ASME A 112.18.1M89 Plumbing Fixture Fittings
Part 200, Appendix A
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
ASTM C 12–91 Standard Practice for Installing Vitrified Clay Pipe Lines
Part 200, Appendix A
ASTM C 208–72 Insulating Board (Cellulosic Fiber), Structural and Decorative (Reapproved 1982)
Part 200, Appendix A
ASTM C 209–84 Standard Methods of Testing Insulating Board (Cellulosic Fiber), Structural and Decorative
Part 200, Appendix A
ASTM C 216–91c Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Part 200, Appendix A
ASTM C 220–91 Standard Specification for Flat Asbestos-Cement Sheets
Part 200, Appendix A
ASTM C 221–91 Standard Specification for Corrugated Asbestos-Cement Sheets
Part 200, Appendix A
ASTM C 223–91 Standard Specification for Asbestos-Cement Siding
Part 200, Appendix A
ASTM C 509–91 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
Part 200, Appendix A
ASTM C 516–80 Standard Specification for Vermiculite Loose Fill Thermal Insulation (Reapproved 1985)
Part 200, Appendix A
ASTM C 549–81 Standard Specification for Perlite Loose Fill Insulation (Reapproved 1986)
Part 200, Appendix A
ASTM C 578–92 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Part 200, Appendix A
ASTM C 640–83 Standard Specification for Insulation Board, Thermal (Cork)
Part 200, Appendix A
ASTM C 726–88 Standard Specification for Mineral Fiber and Roof Insulation Board
Part 200, Appendix A
ASTM C 739–91 Standard Specification for Cellulosic Fiber (Wood-Based) Loose-Fill Thermal Insulation
Part 200, Appendix A
ASTM C 754–88 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum
Part 200, Appendix A
ASTM C 834–91 Standard Specification for Latex Sealants
Part 200, Appendix A
ASTM C 841–90 Standard Specification for Installation of Interior Lathing and Furring
Part 200, Appendix A
ASTM C 842–85 Standard Specification for Application of Interior Gypsum Plaster (Reapproved 1990)
Part 200, Appendix A
ASTM C 843–92 Standard Specification for Application of Gypsum Veneer Plaster
Part 200, Appendix A
ASTM C 844–85 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
Part 200, Appendix A
ASTM C 846–76 Standard Practice for Application of Structural Insulating Board (Fiberboard) Sheathing (Reapproved 1982)
Part 200, Appendix A
ASTM C 864–90 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks and Spacers
Part 200, Appendix A
ASTM C 926–90 Standard Specification for Application of Portland Cement-Based Plaster
Part 200, Appendix A
ASTM C 1036–91 Standard Specification for Flat Glass
Part 200, Appendix A
ASTM D 1037–89 Standard Test Methods for Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials
Part 200, Appendix A
ASTM C 1048–91 Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT Coated and Uncoated Glass
Part 200, Appendix A
ASTM D 1557–91 Test Method for Laboratory Compaction Characteristics of Soil Using the Modified Method (56,000 ft-lbf/ft\3\ (2,700 kN-m/m\3\))
Part 200, Appendix A
ASTM D 2316–75 Standard Recommended Practice for Installing Bituminized Fiber Drain and Sewer Pipe (Reapproved 1984)
Part 200, Appendix A
ASTM D 2321–89 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
Part 200, Appendix A
ASTM D 3656–89 Standard Specifications for Insect Screening and Louver Cloth Woven From Vinyl-Coated Glass Yarns
Part 200, Appendix A
ASTM D 3679–92 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
Part 200, Appendix A
ASTM E 72–80 Standard Methods of Conducting Strength Tests of Panels for Building Construction
Part 200, Appendix A
ASTM E 283–91 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Spectrum
Part 200, Appendix A
ASTM E 330–90 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
Part 200, Appendix A
ASTM E 331–86 Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
Part 200, Appendix A
ASTM E 380–91a Standard Practices for Use of the International Systems of Units (SI) (the Modernized Metric System)
Part 200, Appendix A
American Society of Heating, Refrigerating, and Air Conditioning Engineers
1791 Tullie Circle, NE, Atlanta, GA 30329
ASHRAE Handbook—Fundamentals—1989
Part 200, Appendix A
ASHRAE Cooling and Heating Load Calculation Manual—GRP 158—1979
Part 200, Appendix A
ASHRAE Handbook—Equipment—1988
Part 200, Appendix A
ASHRAE Handbook—HVAC Systems and Applications—1987
Part 200, Appendix A
American Welding Society
550 NW Le Jeune Road, P.O. Box 351040, Miami, FL 33126, Telephone (305) 443–9353
ANSI/AWS D1.1–90 Structural Welding Code—Steel
Part 200, Appendix A
ANSI/AWS D1.4–79 Structural Welding Code—Reinforcing Steel
Part 200, Appendix A
The Asphalt Institute
Asphalt Institute Building, College Park, MD 20740, Telephone (301) 277–4258
MSI–1–81 Thickness Design- Asphalt Pavements for Highways and Streets
Part 200, Appendix A
Asphalt Roofing Manufacturers Association
6288 Montrose Road, Rockville, MD 20852, Telephone (301) 231–9050
Residential Asphalt Roofing Manual—1988
Part 200, Appendix A
Carpet and Rug Institute
310 Holiday Avenue, Box 2048, Dalton, GA 30722–0048, Telephone (404) 278–3176
How to Specify Commercial Carpet Installation, 1984
Part 200, Appendix A
Council of American Building Officials
Suite 708, 5203 Leesburg Pike, Falls Church, VA 22041, Telephone (703) 931–4533
CABO One and Two Family Dwelling Code 1992 edition with Errata Package and 1993 Amendments
Part 200, Appendix A
CABO model Energy Code 1992 edition
Part 200, Appendix A
CABO/ANSI A117.1–92 Accessible and Usable Buildings and Facilities
Part 200, Appendix A
Department of Agriculture, Publications Division
14th and Independence Avenue, SW, Washington, DC 20050, Telephone (202) 447–3957
Agriculture Handbook No. 73, Wood Frame House Construction
Part 200, Appendix A
Home and Garden Bulletin No. 64.—Subterranean Termites—Their Prevention and Control in Buildings, October 1983
Part 200, Appendix A
Home and Garden Bulletin No. 73, Wood Decay in Houses, How to Prevent and Control It, May 1986
Part 200, Appendix A
Department of Commerce
National Institute of Standards and Technology, Gaithersburg, MD 20899, Telephone (301) 975–4025
PS 1–83 Product Standard for Construction and Industrial Plywood with Typical APA Trademarks
Part 200, Appendix A
PS 2–92 Performance Standard for Wood-Based Structural-Use Panels
Part 200, Appendix A
Commercial Standards:
  CS 138–55 Insect Wire Screening
Part 200, Appendix A
  CS 242–62 1\3/4\” Steel Doors & Frames
Part 200, Appendix A
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111-5098
Federal specifications:
  L–S–125B Screening, Insect, Non-metallic—February 3, 1972
Part 200, Appendix A
  L–F–001641 Floor Covering Translucent or Transparent Vinyl Surface With Backing—1971 and Amendment 2—September 24, 1982
Part 200, Appendix A
  L–F–00450A Flooring, Vinyl Plastic (GSAFSS)—1970 and Amendment 1, August 5, 1975
Part 200, Appendix A
  L–F–475A Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2—February 9, 1971
Part 200, Appendix A
  HH–I–521F Insulation Blankets, Thermal (Mineral Fiber-for Ambient Temperatures—1980)
Part 200, Appendix A
  HH–I–526C Insulation Board, Thermal (Mineral Fiber)—1968
Part 200, Appendix A
  HH–I–529B Insulation Board, Thermal (Mineral Aggregate)—1971
Part 200, Appendix A
  HH–I–530B Insulation Board, Thermal, Unfaced, Polyurethane or Polyisocyanurate and Interim I—1982
Part 200, Appendix A
  HH–I–551E Insulation Block and Board, Thermal (Cellular Glass) Fiber, for Ambient Temperatures
Part 200, Appendix A
  HH–I–558B Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tube Covering), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type) and Amendment 3—1976
Part 200, Appendix A
  HH–I–574B Insulation, Thermal (Perlite) and Interim Amendment—1976
Part 200, Appendix A
  HH–I–585C Insulation, Thermal (Vermiculite) and Interim Amendment 1—1976
Part 200, Appendix A
  HH–I–1030B Insulation, Thermal (Mineral Fiber, for Pneumatic or Poured Application)—1980
Part 200, Appendix A
  HH–I–1252B Insulation, Thermal Reflective, (Aluminum Foil) and Interim Amendment 1—1976
Part 200, Appendix A
  HH–I–1972 Insulation Board, Thermal, Faced, Gen; 1, 2, 3, Polyurethane and Polyisocyanurate and 4, 5, & 6 Amendments—1985
Part 200, Appendix A
  LLL–I–535B Insulation Board, Thermal, Cellulosic Fiber
Part 200, Appendix A
  SS–S–346C Siding (Shingles, Clapboards, and Sheets) 1968
Part 200, Appendix A
  SS–T–312B Tile, Floor: Asphalt, Rubber, Vinyl-Composition and Interim Amendment—1979
Part 200, Appendix A
Department of Housing and Urban Development, Manufactured Housing and Construction Standards Division
451 Seventh Street, SW, Mail Room B–133, Washington, DC 20410, Telephone (202) 755–7440
Handbooks:
  4940.2–1973 Minimum Design Standards for Community Water Supply Systems
Part 200, Appendix A
  4940.3–1992 Minimum Design Standards for Community Sewerage Systems (Rev. 1–92)
Part 200, Appendix A
  4930.2–1989 HUD Intermediate MPS Supplement, Solar Heating & Domestic Hot Water Systems
Part 200, Appendix A
  4950.1–1988 Technical Suitability of Products Program, Technical and Processing Procedures (REV. 2 which includes revisions and changes through October 24, 1991)
Part 200, Appendix A
Use of Materials Bulletins:
  25d Power Driven, Mechanically Driven and Manually Driven Fasteners—9/5/73
Part 200, Appendix A
  38h Grademarking of Lumber—7/31/79
Part 200, Appendix A
  44c HUD/FHA Standard for Carpet and Carpet Certification Program—2/22/78 (Plus Addendum 1 & 2)
Part 200, Appendix A
  48 Labels of Independent Programs for Certifying Pressure—Treated Lumber and Plywood (PLUS 5 SUPPLEMENTS—11/15/67)
Part 200, Appendix A
  52a Quality Certification and Labeling for Wood Flush Doors—10/7/75)
Part 200, Appendix A
  58a Acrylic Plastic Sheets for Glazing—9/2/75
Part 200, Appendix A
  60 Field Glued Plywood & Wood Frame Structural Floor Systems—12/9/70
Part 200, Appendix A
  62a Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE)—11/16/72
Part 200, Appendix A
  65 Controlled Density Cellular Concrete Floor Fill—10/11/73
Part 200, Appendix A
  67 Polycarbonate Plastic Sheets for Glazing—9/3/75
Part 200, Appendix A
  70a Particleboard Interior Stair Treads and Certification Program—5/19/82
Part 200, Appendix A
  71 Polystyrene Foam Insulation Sheathing Board—1/10/77
Part 200, Appendix A
  72 HUD Standard for Carpet Cushion—2/6/80
Part 200, Appendix A
  76 Chlorinated Poly (Vinyl Chloride) CPVC and Polybutylene (PB) Hot and Cold Water Distribution—4/25/78
Part 200, Appendix A
  77a Cast Iron Sanitary Drainage System with Hubless Pipe and Fittings—3/28/80
Part 200, Appendix A
  78 Polyethylene (PE), Acrylonitrile-Butadiene-Styrene (ABS), Poly Vinyl Chloride (PVC) and Polybutylene (PB) Plastic Piping for Domestic Cold Water Service—4/25/78
Part 200, Appendix A
  79a Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste and Vent Pipe and Fittings—3/7/82
Part 200, Appendix A
  80 Spray Applied Cellulosic Thermal Insulation—10/31/79
Part 200, Appendix A
  101 HUD Building Product Standards and Certification Program for Exterior Wall Insulation and Finish Systems, July 26, 1993
Part 200, Appendix A
Environmental Protection Agency, Office of Drinking Water
401 M Street, SW, Washington, DC 20460, Telephone (202) 382–5533
EPA 570/9–82–004 Manual of Individual Water Supply
Part 200, Appendix A
(NTIS–PB 85242279) Systems (October 1982)
Part 200, Appendix A
Flat Glass Marketing Association
3310 Harrison Street, White Lakes Professional Building, Topeka, KS 66611, Telephone (913) 266–7013
FGMA Glazing Manual—1986, FGMA Sealant Manual—1990
Part 200, Appendix A
Hardwood Plywood Manufacturers Association
P.O. Box 2789, 1825 Michael Faraday Drive, Reston, VA 22090, Telephone (703) 435–2900
ANSI/HPMA LHF–1987 Laminated Hardwood Flooring
Part 200, Appendix A
Insect Screening Weavers Association
2000 Maple Hill Street, P.O. Box 309, Yorktown Heights, NY 10598
IWS–089 Insect Wire Screening (Wire Fabric)
Part 200, Appendix A
National Academy Press
500 Fifth Street, NW Washington, DC 20001; Internet address: http:www.nap.edu.
Publication 1571 Criteria for Selection and Design of Residential Slabs-on-Ground, Report #33, Building Research Advisory Board (BRAB), 1968
Part 200, Appendix A
National Association of Home Builders, Research Center
400 Prince Georges Boulevard, Upper Marlboro, MD 20772, Telephone (301) 249–4000
Insulation Manual, Homes and Apartments—1979
Part 200, Appendix A
National Association of Plumbing-Heating-Cooling Contractors
P.O. Box 6808, Falls Church, VA 22046, Telephone (703) 237–8100
National Standard Plumbing Code—1993
Part 200, Appendix A
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344-3555
ANSI/NFPA 58–89 Standard for the Storage and Handling of Liquefied Petroleum Gases
Part 200, Appendix A
NFPA 54–88 National Fuel Gas Code (ANSI Z223.1–1988)
Part 200, Appendix A
NFPA 70–93 National Electrical Code
Part 200, Appendix A
National Institute of Building Sciences
1201 L Street, NW, Washington, DC 20005
Metric Guide for Federal Construction—1992
Part 200, Appendix A
National Oak Flooring Manufacturers Association
22 North Front Street, Memphis, TN 38103
Official Grading Rules, Oak, Beech, Birch, Hard Maple, Pecan (OFGR/Vol. 1, No. 1/1986 and 1989 Adddendum)
Part 200, Appendix A
Hardwood Flooring Finishing/Refinishing Manual, 1986
Part 200, Appendix A
Hardwood Flooring Installation Manual, 1986
Part 200, Appendix A
National Roofing Contractors Association
One O’Hare Centre, 6250 River Road, Rosemont, IL 60018, Telephone (708) 318–6722
NRCA Roofing and Waterproofing Manual, 1989
Part 200, Appendix A
National Terrazzo and Mosaic Association
3166 Des Plaines Avenue, Suite 132, Des Plaines, IL 60018, Telephone (708) 635–7744
NTMA Specifications, Details and Technical Data, “Terrazzo Ideas & Design Guide”, 1990
Part 200, Appendix A
National Wood Window and Door Association
1400 East Touhy Avenue, Suite 470, Des Plains, IL 60018, Telephone (847) 299–5200
ANSI/NWWDA IS 1–87 Industry Standard for Wood Flush Doors
Part 200, Appendix A
ANSI/NWWDA IS 2–87 Industry Standard for Wood Windows
Part 200, Appendix A
NWWDA IS 3–88 Industry Standard for Wood Sliding Patio Doors
Part 200, Appendix A
ANSI/NWWDA IS 6–86 Industry Standard for Wood Stile and Rail Doors
Part 200, Appendix A
Post-tensioning Institute
301 West Osborn, Suite 3500, Phoenix, AZ 85013, Telephone (602) 870–7540
Design and Construction of Post-tension Slabs-on-Ground—1980
Part 200, Appendix A
Prestressed Concrete Institute
175 West Jackson Boulevard, Suite 1859, Chicago, IL 60604, Telephone (312) 786–0353
PCI MNL 116 Manual for Quality Control for Plants and Production for Precast Prestressed Concrete Products—1985
Part 200, Appendix A
PCI MNL 117 Manual for Quality Control for Plants and Production of Architectural Precast Concrete Products—1977
Part 200, Appendix A
Resilient Floor Covering Institute
966 Hungerford Drive, Suie 12–B, Rockville, MD 20850, Telephone (301) 340–8580
Recommended Installation Specifications for Vinyl Composition, Solid Vinyl and Asphalt Tile Floorings, 1987
Part 200, Appendix A
Safety Glazing Certification Council, c/o ETL Testing Laboratories
Industrial Park, Route 11, Cortland, New York 13045, Telephone (607) 753–6711
Certified Products Directory—1990
Part 200, Appendix A
Southern California Association of Cabinet Manufacturers
1933 South Broadway, L. 39, Los Angeles, CA 90007, Telephone (213) 749–4355
Certified Construction Standards and Specifications, Guide for Uniform Cabinet Specifications—1973 (Revised 1985)
Part 200, Appendix A
Steel Door Institute
30200 Detroit Road, Cleveland, OH 44145, Telephone (216) 899–0010
ANSI/SDI A123.1–82 Nomenclature for Steel Doors and Steel Door Frames
Part 200, Appendix A
Tile Council of America, Inc.
Box 326, Princeton, NJ 08542–0326, Telephone (609) 921–7050
Handbook for Ceramic Tile Installation—1993
art 200, Appendix A
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
Electrical Appliance and Utilization Equipment Directory, 1992
Part 200, Appendix A
Water Quality Association
4151 Naperville Road, Lisle, IL 60532, Telephone (708) 396–1600
WQA S–100 Household Commercial and Portable Exchange Water Softeners—1985
Part 200, Appendix A
WQA S–200 Household and Commercial Water Filters—1988
Part 200, Appendix A
WQA S–300 Point-of-Use, Low Pressure Reverse Osmosis Drinking Water Systems—1984
Part 200, Appendix A
WQA S–400 Point-of-Use Distillation Drinking Water Systems—1986
Part 200, Appendix A
Wood Moulding and Millwork Producers
P.O. Box 25278, Portland, OR 97225, Telephone (503) 292–9288
WM 3–79 Exterior Wood Door Frames
Part 200, Appendix A

MINIMUM PROPERTY STANDARDS FOR CARE-TYPE HOUSING:

Air Conditioning and Refrigeration Institute
1815 N. Fort Myer Dr., Arlington, VA 22209
ARI 210–79 Unitary Air Conditioning Equipment
Part 200, Subpart S
ARI 240–77 Air Source Unitary Heat Pump Equipment
Part 200, Subpart S
ARI 260–75 Application, Installation, and Servicing of Unitary Systems
Part 200, Subpart S
ARI 270–80 Sound Rating of Outdoor Unitary Equipment
Part 200, Subpart S
ARI 320–81 Water–Source Heat Pumps
Part 200, Subpart S
ARI 1010–78 Drinking–Fountains and Self–Contained, Mechanically–Refrigerated Drinking–Water Coolers
Part 200, Subpart S
Air Conditioning Contractors of America
1228 17 St., NW, Washington, DC 20036
Manual J—Load Calculation for Residential Winter and Summer Air Conditioning—1975
Part 200, Subpart S
Aluminum Association
818 Connecticut Ave., NW, Washington, DC 20006
Aluminum Sheet Metal Work in Building Construction–1980
Part 200, Subpart S
Aluminum Standards and Data–1979
Part 200, Subpart S
Specifications for Aluminum Structures–1976
Part 200, Subpart S
Welding Aluminum–1972
Part 200, Subpart S
Aluminum Construction Manual, 1971
Part 200, Subpart S
American Concrete Institute
P.O. Box 19150, Redford Station, Detroit MI 48219
ACI Manual of Concrete Practice–1981, Parts 1–5
Part 200, Subpart S
ACI 531–79 and ACI 531R Building Code Requirements for Concrete Masonry Structures and Commentary
Part 200, Subpart S
American Association of State Highway and Transportation Officials
444 N. Capitol St., NW, Sutie 249, Washington, DC 20001
Standard Specifications for Highway Bridges, 12th Ed., 1977
Part 200, Subpart S
American Gas Association
1515 Wilson Blvd., Arlington, VA 22209
Directory of Certified Appliances and Accessories, January 1, 1981
Part 200, Subpart S
American Institute of Steel Construction
400 N. Michigan Ave., Chicago, IL 60611
Specification for the Design, Fabrication and Erection of Structural Steel for Buildings—1978
Part 200, Subpart S
American Institute of Timber Construction
333 W. Hampden Ave., Englewood, CO 80110
Timber Construction Manual—1974
Part 200, Subpart S
American Iron and Steel Institute
1000 16th St., NW, Washington, DC 20036
Design Manual for Structural Steel Tubing—1976
Part 200, Subpart S
Specification for the Design of Cold-Formed Stainless Steel Structural Members—1974
Part 200, Subpart S
Specification for the Design of Cold-Formed Steel Structural Members—1980
Part 200, Subpart S
American National Standards Institute
11 West 42nd Street, New York, NY 10036 Telephone: (212) 642–4900
ANSI A42.3–71 Lathing and Furring for Portland Cement-Lime Plastering, Exterior (Stucco) and Interior
Part 200, Subpart S
ANSI A58.1–72 Minimum Design Loads in Buildings and Other Structures
Part 200, Subpart S
ANSI A108.1–76 Installation of Glazed Wall Tile, Ceramic Mosaic Tile, Quarry Tile and Paver Tile with Portland Cement Mortar
Part 200, Subpart S
ANSI A108.4–76 Installation of Ceramic Tile with Water-Resistant Organic Adhesives
Part 200, Subpart S
ANSI A108.5–76 Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar
Part 200, Subpart S
ANSI A108.6–76 Installation of Ceramic Tile with Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy
Part 200, Subpart S
ANSI A112.19.2–73 Vitreous China Plumbing Fixtures
Part 200, Subpart S
ANSI A117.1–80 Specifications for Making Buildings and Facilities Accessible to and Usable by Physically Handicapped People
Part 200, Subpart S
ANSI A118.1–76 Specifications For Dry-Set Portland Cement Mortar
Part 200, Subpart S
ANSI A118.3–76 Specifications For Chemical Resistant Water Cleanable Tile-Setting and Grouting Epoxy of Ceramic Tile
Part 200, Subpart S
ANSI A136.1–72 Standard for Organic Adhesives for Installation of Ceramic Tile
Part 200, Subpart S
ANSI A208.1–79 Mat Formed Wood Particleboard
Part 200, Subpart S
ANSI O10.2–75 Laminated Hardwood Block Flooring
Part 200, Subpart S
ANSI Z21.10.1–75 Gas Automatic Storage Type Water Heaters
Part 200, Subpart S
ANSI Z21.10.3b–79 Gas Instantaneous and Large Automatic Storage Type Water Heaters
Part 200, Subpart S
ANSI Z21.40.1–74 Gas Fired Absorbtion Summer Air Conditioning Appliances
Part 200, Subpart S
ANSI Z34.1–47 American Standard Practice For Certification Procedures
Part 200, Subpart S
American Plywood Association
P.O. Box 1170, Tacoma, WA 98411
APA AFG–01 Adhesives For Field-Gluing Plywood to Wood Framing—1974
Part 200, Subpart S
APA E30 Plywood Construction Guide—Residential and Commercial—1980
Part 200, Subpart S
APA S811 Design and Fabrication of Plywood Curved Panels—1979
Part 200, Subpart S
APA S812 Design and Fabrication of Plywood-Lumber Beams—1979
Part 200, Subpart S
APA U310 Plywood Diaphragm Construction—1978
Part 200, Subpart S
APA U813 Design of Plywood Stressed Skin Panels—1976
Part 200, Subpart S
APA U814 Design and Fabrication of Plywood Sandwich Panels—1978
Part 200, Subpart S
APA V450 Glued Floor System—1980
Part 200, Subpart S
APA V340 Fabrication of Plywood Stressed Skin Panels—1974
Part 200, Subpart S
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME Boiler and Pressure Vessel Code Section IV, 1980 Edition: Addenda Summer 80; Winter 80; Summer 81
Part 200, Subpart S
ASME Boiler and Pressure Vessel Code Section VIII, Division 1, 1980 Edition: Addenda Summer 80; Winter 80; Summer 81
Part 200, Subpart S
ASME Boiler and Pressure Vessel Code Section VIII, Division 2, 1980 Edition: Addenda Summer 80; Winter 80; Summer 81
Part 200, Subpart S
ASME Boiler and Pressure Vessel Code Section X, 1980 Edition: Addenda Winter 80; Summer 81
Part 200, Subpart S
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
ASTM A 27–79 Mild- to Medium-Strength Carbon-Steel Castings for General Application
Part 200, Subpart S
ASTM A 36–77a Structural Steel
Part 200, Subpart S
ASTM A 53–79 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless
Part 200, Subpart S
ASTM A 74–75 Cast Iron Soil Pipe and Fittings
Part 200, Subpart S
ASTM A 82–79 Cold-Drawn Steel Wire for Concrete Reinforcement
Part 200, Subpart S
ASTM A 116–73 Zinc-Coated (Galvanized) Iron or Steel Farm-Field and Railroad Right-of-Way Wire Fencing
Part 200, Subpart S
ASTM A 148–73 (R 79) High-Strength Steel Castings for Structural Purposes
Part 200, Subpart S
ASTM A 167–77 Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip
Part 200, Subpart S
ASTM A 184–79 Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
Part 200, Subpart S
ASTM A 185–79 Welded Steel Wire Fabric for Concrete Reinforcement
Part 200, Subpart S
ASTM A 242–79 High-Strength Low-Alloy Structural Steel
Part 200, Subpart S
ASTM A 268–79a Seamless and Welded Ferritic Stainless Steel Tubing for General Service
Part 200, Subpart S
ASTM A 307–78 Carbon Steel Externally Threaded Standard Fasteners
Part 200, Subpart S
ASTM A 308–78 Terne Plate
Part 200, Subpart S
ASTM A 325–79 High-Strength Bolts for Structural Steel Joints
Part 200, Subpart S
ASTM A 361–76 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Roofing and Siding
Part 200, Subpart S
ASTM A 412–75 Stainless and Heat-Resisting Chromium Nickel-Manganese Steel Plate, Sheet, and Strip
Part 200, Subpart S
ASTM A 416–74 Uncoated Seven-Wire Stress-Relieved Strand for Prestressed Concrete
Part 200, Subpart S
ASTM A 421–78 Uncoated Stress-Relieved Wire for Prestressed Concrete
Part 200, Subpart S
ASTM A 441–79 High-Strength Low-Alloy Structural Manganese Vanadium Steel
Part 200, Subpart S
ASTM A 446–76 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality
Part 200, Subpart S
ASTM A 449–78a Quenched and Tempered Steel Bolts and Studs
Part 200, Subpart S
ASTM A 490–79 Quenched and Tempered Alloy Steel Bolts for Structural Steel Joints
Part 200, Subpart S
ASTM A 496–78 Deformed Steel Wire for Concrete Reinforcement
Part 200, Subpart S
ASTM A 497–79 Welded Deformed Steel Wire, Fabric for Concrete Reinforcement
Part 200, Subpart S
ASTM A 500–78 Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
Part 200, Subpart S
ASTM A 501–76 Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
Part 200, Subpart S
ASTM A 502–76 Steel Structural Rivets
Part 200, Subpart S
ASTM A 514–77 High-Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
Part 200, Subpart S
ASTM A 525–79 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, General Requirements
Part 200, Subpart S
ASTM A 529–75 Structural Steel with 42,000 PSI (290 MPa) Minimum Yield Point (\1/2\ in. (12.7mm) Maximum Thickness)
Part 200, Subpart S
ASTM A 570–79 Hot-Rolled Carbon Steel Sheet and Strip, Structural Quality
Part 200, Subpart S
ASTM A 572–79 High-Strength Low-Alloy Columbium-Vanadium Steels of Structural Quality
Part 200, Subpart S
ASTM A 588–79a High-Strength Low-Alloy Structural Steel with 50,000 PSI Minimum Yield Point to 4 in. Thick
Part 200, Subpart S
ASTM A 606–75 Steel Sheet and Strip, Hot-Rolled and Cold-Rolled High Strength, Low-Alloy, with Improved Corrosion Resistance
Part 200, Subpart S
ASTM A 607–75 Steel Sheet and Strip, Hot-Rolled and Cold-Rolled, High Strength, Low-Alloy Columbium and/or Vanadium
Part 200, Subpart S
ASTM A 611–72 Steel, Cold-Rolled Sheet, Carbon, Structural
Part 200, Subpart S
ASTM A 615–79 Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
Part 200, Subpart S
ASTM A 616–79 Rail-Steel Deformed and Plain Bars for Concrete Reinforcement
Part 200, Subpart S
ASTM A 617–79 Axle-Steel Deformed and Plain Bars for Concrete Reinforcement
Part 200, Subpart S
ASTM A 618–74 Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
Part 200, Subpart S
ASTM A 668–79a Steel Forgings, Carbon and Alloy, for General Industrial Use
Part 200, Subpart S
ASTM B 88–80 Seamless Copper Water Tube
Part 200, Subpart S
ASTM B 227–70 Hard-Drawn Copper-Clad Steel Wire
Part 200, Subpart S
ASTM B 370–77 Copper Sheet and Strip for Building Construction
Part 200, Subpart S
ASTM B 587–80 Welded Brass Tube
Part 200, Subpart S
ASTM C 4–62 Clay Drain Tile
Part 200, Subpart S
ASTM C 5–79 Quicklime for Structural Purposes
Part 200, Subpart S
ASTM C 12–77 Installing Vitrified Clay Pipe Lines
Part 200, Subpart S
ASTM C 14–79 Concrete Sewer, Storm Drain, and Culvert Pipe
Part 200, Subpart S
ASTM C 22–77 Gypsum
Part 200, Subpart S
ASTM C 28–80 Gypsum Plasters
Part 200, Subpart S
ASTM C 32–73 Sewer and Manhole Brick (Made from Clay or Shale)
Part 200, Subpart S
ASTM C 33–80 Concrete Aggregates
Part 200, Subpart S
ASTM C 34–62 Structural Clay Load-Bearing Wall Tile
Part 200, Subpart S
ASTM C 35–76 Inorganic Aggregates for Use in Gypsum Plaster
Part 200, Subpart S
ASTM C 36–80 Gypsum Wallboard
Part 200, Subpart S
ASTM C 37–80 Gypsum Lath
Part 200, Subpart S
ASTM C 52–54 Gypsum Partition Tile or Block
Part 200, Subpart S
ASTM C 55–75 Concrete Building Brick
Part 200, Subpart S
ASTM C 56–71 Structural Clay Non-Load Bearing Tile
Part 200, Subpart S
ASTM C 57–57 Structural Clay Floor Tile
Part 200, Subpart S
ASTM C 61–76 Gypsum Keene's Cement
Part 200, Subpart S
ASTM C 62–75a Building Brick (Solid Masonry Units Made From Clay or Shale)
Part 200, Subpart S
ASTM C 64–72 Refractories for Incinerators and Boilers
Part 200, Subpart S
ASTM C 73–75 Calcium Silicate Face Brick (Sand-Lime Brick)
Part 200, Subpart S
ASTM C 76–79 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
Part 200, Subpart S
ASTM C 79–78 Gypsum Sheathing Board
Part 200, Subpart S
ASTM C 88–76 Soundness of Aggregates by Use of Sodium Sulfate or Manganese Sulfate
Part 200, Subpart S
ASTM C 90–78 Hollow Load-Bearing Concrete Masonry Units
Part 200, Subpart S
ASTM C 91–78 Masonry Cement
Part 200, Subpart S
ASTM C 94–80 Ready-Mixed Concrete
Part 200, Subpart S
ASTM C 126–71 Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
Part 200, Subpart S
ASTM C 129–75 Non-Load Bearing Concrete Masonry Units
Part 200, Subpart S
ASTM C 139–73 Concrete Masonry Units for Construction of Catch Basins and Manholes
Part 200, Subpart S
ASTM C 143–78 Slump of Portland Cement Concrete
Part 200, Subpart S
ASTM C 144–76 Aggregate for Masonry Mortar
Part 200, Subpart S
ASTM C 145–75 Solid Load-Bearing Concrete Masonry Units
Part 200, Subpart S
ASTM C 150–80 Portland Cement
Part 200, Subpart S
ASTM C 157–75 Length Change of Hardened Cement Mortar and Concrete
Part 200, Subpart S
ASTM C 206–79 Finishing Hydrated Lime
Part 200, Subpart S
ASTM C 207–79 Hydrated Lime for Masonry Purposes
Part 200, Subpart S
ASTM C 208–72 Insulating Board (Celluosic Fiber), Structural and Decorative
Part 200, Subpart S
ASTM C 209–72 Insulating Board (Cellulosic Fiber), Structural and Decorative
Part 200, Subpart S
ASTM C 212–75 Structural Clay Facing Tile
Part 200, Subpart S
ASTM C 216–79 Facing Brick (Solid Masonry Units Made from Clay or Shale)
Part 200, Subpart S
ASTM C 220–77 Flat Asbestos-Cement Sheets
Part 200, Subpart S
ASTM C 221–77 Corrugated Asbestos-Cement Sheets
Part 200, Subpart S
ASTM C 222–78 Asbestos-Cement Roofing Shingles
Part 200, Subpart S
ASTM C 223–78 Asbestos-Cement Siding
Part 200, Subpart S
ASTM C 260–77 Air-Entraining Admixtures for Concrete
Part 200, Subpart S
ASTM C 270–80a Mortar for Unit Masonry
Part 200, Subpart S
ASTM C 315–78c Clay Flue Linings
Part 200, Subpart S
ASTM C 317–76 Gypsum Concrete
Part 200, Subpart S
ASTM C 330–79 Lightweight Aggregates for Structural Concrete
Part 200, Subpart S
ASTM C 332–77a Lightweight Aggregates for Insulating Concrete
Part 200, Subpart S
ASTM C 355–64 Water Vapor Transmission of Thick Materials
Part 200, Subpart S
ASTM C 377–77 Precast Reinforced Gypsum Slabs
Part 200, Subpart S
ASTM C 412–79 Concrete Drain Tile
Part 200, Subpart S
ASTM C 425–77 Compression Joints for Vitrified Clay Pipe and Fittings
Part 200, Subpart S
ASTM C 428–78 Asbestos-Cement Nonpressure Sewer Pipe
Part 200, Subpart S
ASTM C 475–64 Joint Treatment Materials for Gypsum Wallboard Construction
Part 200, Subpart S
ASTM C 476–71 Mortar and Grout for Reinforced Masonry
Part 200, Subpart S
ASTM C 494–79 Chemical Admixtures for Concrete
Part 200, Subpart S
ASTM C 495–77a Compressive Strength of Lightweight Insulating Concrete
Part 200, Subpart S
ASTM C 508–78a Asbestos-Cement Underdrain Pipe
Part 200, Subpart S
ASTM C 509–79 Cellular Elastomeric Preformed Gasket and Sealing Material
Part 200, Subpart S
ASTM C 514–77 Nails for the Application of Gypsum Wallboard
Part 200, Subpart S
ASTM C 516–75 Vermiculite Loose Fill Insulation
Part 200, Subpart S
ASTM C 530–75 Structural Clay Non-Load Bearing Screen Tile
Part 200, Subpart S
ASTM C 549–73 Perlite Loose Fill Insulation
Part 200, Subpart S
ASTM C 564–70 (R 76) Rubber Gaskets for Cast Iron Soil Pipe and Fittings
Part 200, Subpart S
ASTM C 587–68 Gypsum Veneer Plaster
Part 200, Subpart S
ASTM C 588–80 Gypsum Base for Veneer Plasters
Part 200, Subpart S
ASTM C 595–79 Blended Hydraulic Cements
Part 200, Subpart S
ASTM C 618–78 Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete
Part 200, Subpart S
ASTM C 630–78 Water-Resistant Gypsum Backing Board
Part 200, Subpart S
ASTM C 652–77 Hollow Brick (Hollow Masonry Units Made from Clay or Shale)
Part 200, Subpart S
ASTM C 654–79 Porous Concrete Pipe
Part 200, Subpart S
ASTM C 655–77 Reinforced Concrete D-Load Culvert, Storm Drain and Sewer Pipe
Part 200, Subpart S
ASTM C 666–77 Resistance of Concrete to Rapid Freezing and Thawing
Part 200, Subpart S
ASTM C 700–78a Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
Part 200, Subpart S
ASTM C 726–79 Insulation Board, Thermal (Mineral Aggregate)
Part 200, Subpart S
ASTM C 754–79 Installation of Steel Framing Members to Receive, Screw Attached Gypsum, Wallboard, Backing Board or Water Resistant Backing Board
Part 200, Subpart S
ASTM C 803–79 Penetration Resistance of Hardened Concrete
Part 200, Subpart S
ASTM C 840–79 Application and Finishing of Gypsum Board
Part 200, Subpart S
ASTM C 843–76 Application of Gypsum Veneer Plaster
Part 200, Subpart S
ASTM C 844–79 Application of Gypsum Base to Receive Gypsum Veneer Plaster
Part 200, Subpart S
ASTM C 846–76 Application of Structural Insulating Board (Fiberboard) Sheathing
Part 200, Subpart S
ASTM C 847–77 Metal Lath
Part 200, Subpart S
ASTM C 902–79 Pedestrian and Light Traffic Paving Brick
Part 200, Subpart S
ASTM D 173–80 Woven Cotton Fabrics Saturated with Bituminous Substances for Use in Waterproofing
Part 200, Subpart S
ASTM D 224–75 Smooth-Surfaced Asphalt Roll Roofing (Organic Felt)
Part 200, Subpart S
ASTM D 225–78 Asphalt Shingles Surfaced with Mineral Granules
Part 200, Subpart S
ASTM D 226–77 Asphalt-Saturated Organic Roofing Felt for Use in Membrane Waterproofing and Built-Up Roofing
Part 200, Subpart S
ASTM D 227–78 Coal-Tar Saturated Roofing Felt for Use in Waterproofing and Constructing Built-Up Roofs
Part 200, Subpart S
ASTM D 250–77 Asphalt-Saturated Asbestos Felts for Use in Waterproofing and in Constructing Built-Up Roofs
Part 200, Subpart S
ASTM D 312–78 Asphalt Used In Roofing
Part 200, Subpart S
ASTM D 449–73 Asphalt Used in Damproofing and Waterproofing
Part 200, Subpart S
ASTM D 450–78 Coal-Tar Bitumen Used in Roofing Damproofing, and Waterproofing
Part 200, Subpart S
ASTM D 471–79 Test for Rubber Property, Effects of Liquids
Part 200, Subpart S
ASTM D 994–71 Preformed Expansion Joint Filler for Concrete (Bituminous Type)
Part 200, Subpart S
ASTM D 1037–78 Wood-Base Fiber and Particle Panel Materials
Part 200, Subpart S
ASTM D 1143–74 Piles Under Axial Compression Load
Part 200, Subpart S
ASTM D 1194–72 Bearing Capacity of Soil for Static Load on Spread Footings
Part 200, Subpart S
ASTM D 1557–78 Moisture-Unit Weight Relations of Soils, and Soil-Aggregate Mixtures Using 10–1b (4.5 kg) Rammer and 18-in. (457-mm) Drop
Part 200, Subpart S
ASTM D 1593–61 Nonrigid Vinyl Chloride Plastic Sheeting
Part 200, Subpart S
ASTM D 1751–78 Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
Part 200, Subpart S
ASTM D 1752–67 Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
Part 200, Subpart S
ASTM D 1861–77 Homogeneous Bituminized Fiber Drain and Sewer Pipe
Part 200, Subpart S
ASTM D 1862–77 Laminated-Wall Bituminized Fiber Drain and Sewer Pipe
Part 200, Subpart S
ASTM D 1863–77 Mineral Aggregate Used On Built-Up Roofs
Part 200, Subpart S
ASTM D 2103–73 Polyethylene Film and Sheeting
Part 200, Subpart S
ASTM D 2178–76 Asphalt–Impregnated Glass Malt Used in Roofing and Water Proofing (Felt)
Part 200, Subpart S
ASTM D 2216–71 Moisture Content of Soil
Part 200, Subpart S
ASTM D 2311–77 Perforated Homogeneous Bituminized Fiber Pipe for General Drainage
Part 200, Subpart S
ASTM D 2316–75 Installing Bituminized Fiber Drain and Sewer Pipe
Part 200, Subpart S
ASTM D 2321–74 Underground Installation of Flexible Thermoplastic Sewer Pipe
Part 200, Subpart S
ASTM D 2417–77 Laminated-Wall Bituminized Fiber Perforated Pipe for Agricultural, Land, and General Drainage
Part 200, Subpart S
ASTM D 2487–69 Soils for Engineering Purposes
Part 200, Subpart S
ASTM D 2488–69 Soils (Visual-Manual Procedure)
Part 200, Subpart S
ASTM D 2661–78 Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, and Vent Pipe and Fittings
Part 200, Subpart S
ASTM D 2665–78 Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste and Vent Pipe and Fittings
Part 200, Subpart S
ASTM D 2729–78 Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Part 200, Subpart S
ASTM D 2751–77a Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
Part 200, Subpart S
ASTM D 2898–77 Accelerated Weathering of Fire-Retardant Treated Wood for Fire Testing
Part 200, Subpart S
ASTM D 2949–78 3-in. Thin Wall Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Part 200, Subpart S
ASTM D 3110–72 Adhesives Used in Nonstructural Glued Lumber Products
Part 200, Subpart S
ASTM D 3462–76 Asphalt Shingles Made From Glass Mat and Surfaced With Mineral Granules
Part 200, Subpart S
ASTM D 3656–78 Insect Screening and Louver Cloth Woven From Vinyl-Coated Glass Fiber Yarn
Part 200, Subpart S
ASTM D 3679–79 Rigid Polyvinyl Chloride (PVC) Siding
Part 200, Subpart S
ASTM E 162–79 Surface Flammability of Materials Using a Radiant Heat Energy Source
Part 200, Subpart S
ASTM E 163–80 Fire Tests of Window Assemblies
Part 200, Subpart S
ASTM E 283–73 Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors
Part 200, Subpart S
ASTM E 330–79 Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
Part 200, Subpart S
ASTM E 331–70 Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
Part 200, Subpart S
ASTM E 380–79 Metric Practice
Part 200, Subpart S
ASTM E 413–73 Sound Transmission Class
Part 200, Subpart S
ASTM E 447–74 Compressive Strength of Masonry Prisms
Part 200, Subpart S
ASTM E 492–77 Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
Part 200, Subpart S
ASTM F 405–77a Corrugated Polyethylene (PE) Tubing and Fittings
Part 200, Subpart S
ASTM F 462–79 Slip-Resistant Bathing Facilities
Part 200, Subpart S
ASTM F 628–79 Acrylonitrile-Butadiene Styrene (ABS) Plastic Drain, Waste, & Vent Pipe Having a Foam Core
Part 200, Subpart S
ASTM STP 479–70 Special Procedures for Testing Soil and Rock for Engineering Purposes
Part 200, Subpart S
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
345 E. 47th St., New York, NY 10017
ASHRAE 52–76 Method for Testing Air Cleaning Devices
Part 200, Subpart S
ASHRAE 62–81 Standards for Natural and Mechanical Ventilation (ANSI/ASHRAE 62) (ANSI B194.1)
Part 200, Subpart S
ASHRAE Handbooks-Fundamentals 1981, Applications 1978, Equipment 1979, Systems 1980
Part 200, Subpart S
ASHRAE GRP 158–1979 Cooling and Heating Load Calculations Manual—1979
Part 200, Subpart S
American Society of Sanitary Engineers, Inc.
P.O. Box 9712, Bay Village, OH 44140
ASSE 1002–77 Water Closet Flush Tank Ball Cocks
Part 200, Subpart S
ASSE 1003–70 Water Pressure Reducing Valves (ANSI A 112.26.2)
Part 200, Subpart S
ASSE 1006–79 Household Dishwashers (ANSI A 197.1) (ANSI/AHAM DW–2PR)
Part 200, Subpart S
ASSE 1007–79 Home Laundry Equipment (ANSI A 197.2) (ANSI/AHAM HLW–2PR)
Part 200, Subpart S
ASSE 1008–79 Household Food Waste Disposer Units (ANSI A 197.3) (ANSI/AHAM FWD–2PR)
Part 200, Subpart S
ASSE 1014–79 Hand Held Showers
Part 200, Subpart S
ASSE 1016–79 Individual Shower Control Valves, Anti-Scald Type
Part 200, Subpart S
ASSE 1017–79 Thermostatic Mixing Valves, Self Actuated for Primary Domestic Use
Part 200, Subpart S
ASSE 1018–78 Trap Seal Primer Valves
Part 200, Subpart S
ASSE 1019–78 Wall Hydrants, Frost Proof Automatic Draining, Anti-Backflow Types
Part 200, Subpart S
ASSE 1023–79 Hot Water Dispensers, Household Storage Type, Electrical
Part 200, Subpart S
ASSE 1025–78 Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications
Part 200, Subpart S
American Water Works Association
6666 W. Quincy Avenue, Denver, CO 80235
AWWA C 106–75 Cast-Iron Pipe Centrifigually Cast in Metal Molds, for Water or Other Liquids (ANSI/AWWA C 106) (ANSI A 21.6)
Part 200, Subpart S
AWWA C 151–76 Ductile Iron Pipe Centrifugally Cast in Metal Molds or for Water or Other Liquids (ANSI/AWWA 151) (ANSI A 21.51)
Part 200, Subpart S
AWWA C 204–75 Chlorinated Rubber-Alkyd Paint System for the Exterior of Above Ground Steel Water Piping
Part 200, Subpart S
American Wood Preservers Institute
1651 Old Meadow Rd., Mclean, VA 22101
Pile Foundation Know-How—1969
Part 200, Subpart S
Architectural Aluminum Manufacturers Association
35 E. Wacker Dr., Chicago, IL 60601
AAMA 302.9–77 Aluminum Prime Windows (ANSI A 134.1)
Part 200, Subpart S
AAMA SG–1–76 Specifications for Dense Rubber-Like Compression Gasket Materials
Part 200, Subpart S
AAMA 1976 Metal Curtain Wall, Window, Store Front and Entrance Guide Specification Manual
Part 200, Subpart S
AAMA 402.9–77 Aluminum Sliding Glass Doors and Frames (ANSI A 134.2)
Part 200, Subpart S
AAMA 1002.10–80 Storm Windows (ANSI A 134.3)
Part 200, Subpart S
AAMA 1102.7–77 Aluminum Storm Doors and Frames (ANSI A 134.4)
Part 200, Subpart S
AAMA 809.2–1976 Non Drying Sealants for use with Architectural Aluminum
Part 200, Subpart S
AAMA 804.1–1976 Ductile Back Bedding Glazing Tape for use with Architectural Aluminum
Part 200, Subpart S
AAMA 807.1–1976 Cured Rubber Back Bedding Glazing Tape
Part 200, Subpart S
AAMA 1402.3–1975 Specifications for Aluminum Siding and High Performance Coating for Aluminum Siding
Part 200, Subpart S
AAMA 1403.2–1975 Installation Specifications for Residential Aluminum Siding
Part 200, Subpart S
AAMA 1502.6–77 Residential Insulating Windows and Sliding Glass Doors
Part 200, Subpart S
Asphalt Institute, The
Asphalt Institute Bldg., College Park, MD 20740
MS–1 Thickness Design—Full-Depth Asphalt Pavement Structures for Highways and Streets—8th Edition 1970
Part 200, Subpart S
Asphalt Roofing Manufacturers Association
1800 Massachusetts Ave., NW, Washington, DC 20036
Residential Asphalt Roofing Manual—1980
Part 200, Subpart S
Association of Home Appliance Manufacturers
20 N. Wacker Dr., Chicago, IL 60606
AHAM RAC–1–72 Room Air Conditioner Standard (ANSI Z 234.1)
Part 200, Subpart S
Brick Institute of America
1750 Old Meadow Rd., McLean, VA 22102
Construction Building Code Requirements for Engineered Brick Masonry—1969
Part 200, Subpart S
Recommended Practices and Guide Specifications for Cold Weather Masonry—1973
Part 200, Subpart S
Building Research Advisory Board
National Academy Press, 500 Fifth Street NW, Washington, DC 20001
Criteria for Selection and Design of Residential Slabs-on-Ground, National Academy of Sciences 1571—1968
Part 200, Subpart S
Foundations for Residential Structures in Seismic Areas, National Academy of Sciences—National Research Council—1969
Part 200, Subpart S
Canadian Wood Council
85 Albert St., Ottawa, ON K1P 6A4
Canadian Dimension Lumber—Data Book—1979
Part 200, Subpart S
Carpet and Rug Institute
301 Holiday Ave., Box 2048, Dalton, GA 30720
Specifiers Guide for Contract Carpet Installations, 1980
Part 200, Subpart S
Cast-Iron Soil Pipe Institute
1499 Chain Bridge Rd., Suite 203, McLean, VA 22101
CISPI HS 74 Specifications for Cast-Iron Soil Pipe and Fittings For Hub and Spigot Sanitary System—1978
Part 200, Subpart S
CISPI HSN Specifications for Neoprine Rubber Gaskets for Hub and Spigot Cast Iron Soil Pipe Fittings—1978
Part 200, Subpart S
CISPI 301 Standard Specification for Cast Iron Soil Pipe and Fittings For Hubless Cast Iron Sanitary Systems—1978
Part 200, Subpart S
CISPI 310 Specifications for Cast Iron Soil Pipe Institute's Patented Joint For Use In Connection With Hubless Cast Iron Sanitary Systems—1978
Part 200, Subpart S
CISPI Cast Iron Soil Pipe and Fittings Handbook—Vol. 1—1976
Part 200, Subpart S
Ceramic Tile Institute
700 N. Virgil Ave., Los Angeles, CA 90029
CTI R8–103–62 Standard Specifications for the Installation of Tile Lined Shower Receptors—1969
Part 200, Subpart S
Commercial Standard
National Institute of Standards and Technology (formerly the National Bureau of Standards), Washington, DC 20234
CS 242–62 1\3/4\ Thick Steel Doors and Frames
Part 200, Subpart S
Department of Defense
DODSSP Standarization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111-5098
Federal specifications:
  L–F–001641 (GSA/FSS) Floor Covering, Translucent or Transparent Vinyl Surface with Backing and Amendment 1, 1971
Part 200, Subpart S
  L–F–00450A (GSA/FSS) Flooring, Vinyl Plastic
Part 200, Subpart S
  L–F–475A Floor Covering Vinyl, Surface (Tile and Roll) with Backing
Part 200, Subpart S
  L–P–375C Plastic Film, Flexible, Vinyl Chloride
Part 200, Subpart S
  L–P–512C Plastic Sheet (Sheeting): Polyethylene
Part 200, Subpart S
  L–S–125B Screening Insect, Nonmetallic
Part 200, Subpart S
  R–P–381A Pitch, Coal-Tar: (For) Aggregate Surfaced Built-Up Roofing, Waterproofing and Dampproofing
Part 200, Subpart S
  DD–G–451D Glass, Float or Plate, Sheet, Figured (Flat, For Glazing, Mirrors and Other Uses)
Part 200, Subpart S
  DD–G–1403B Glass, Plate (Float), Sheet, Figured, and Spandrel (Heat Strengthened and Fully Tempered)
Part 200, Subpart S
  FF–B–561C Bolts, (Screw), Lag
Part 200, Subpart S
  FF–N–105B Nails, Brads, Staples and Spikes: Wire, Cut, and Wrought
Part 200, Subpart S
  FF–S–111D Screw, Wood
Part 200, Subpart S
  HH–F–341F Fillers, Expansion Joint: Bituminous (Asphalt and Tar) and Nonbituminous
Part 200, Subpart S
  HH–I–515D Insulation Thermal (Loose Fill For Pneumatic Or Poured Application) Cellulosic or Wood Fiber
Part 200, Subpart S
  HH–I–521F Insulation Blankets, Thermal (Mineral Fiber, for Ambient Temperatures)
Part 200, Subpart S
  HH–I–524C Insulation Board, Thermal (Polystyrene)
Part 200, Subpart S
  HH–I–525A Insulation Board, Thermal (Cork)
Part 200, Subpart S
  HH–I–526C Insulation Board, Thermal (Mineral Fiber)
Part 200, Subpart S
  HH–I–530A Insulation Board, Thermal (Urethane)
Part 200, Subpart S
  HH–I–545B Insulation, Thermal and Acoustical (Mineral Fiber, Duct Lining Material)
Part 200, Subpart S
  HH–I–551E Insulation Block and Boards, Thermal (Cellular Glass)
Part 200, Subpart S
  HH–I–558B Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tube Covering), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type)
Part 200, Subpart S
  HH–I–574B Insulation, Thermal (Perlite)
Part 200, Subpart S
  HH–I–585C Insulation, Thermal (Vermiculite)
Part 200, Subpart S
  HH–I–1030B Insulation, Thermal (Mineral Fiber, For Pneumatic or Poured Application)
Part 200, Subpart S
  HH–I–1252B Insulation, Thermal, Reflective (Aluminum Foil)
Part 200, Subpart S
  HH–R–590B Roofing Felt (Asbestos, Asphalt Saturated)
Part 200, Subpart S
  HH–R–595B Roofing Felt, Coal Tar and Asphalt Saturated Organic Felts, Rolls
Part 200, Subpart S
  QQ–C–576B Copper Flat Products With Slit, Slit and Edgerolled, Sheared, Sawed, or Machined Edges, (Plate, Bar, Sheet, and Strip)
Part 200, Subpart S
  QQ–T–201E Terne Plate, For Roofing and Roofing Products
Part 200, Subpart S
  RR–F–191/1C Fencing, Wire and Post, Metal (Chain-Link Fence Accessories)
Part 200, Subpart S
  RR–W–365A Wire Fabric (Insect Screening)
Part 200, Subpart S
  SS–A–666D Asphalt, Petroleum (Built-Up Roofing, Waterproofing, and Part Dampproofing)
Part 200, Subpart S
  SS–C–161A Cement, Keene's
Part 200, Subpart S
  SS–C–450A Cloth, Impregnated (Woven Cotton Cloth, Asphalt Impregnated: Coal Tar Impregnated)
Part 200, Subpart S
  SS–L–30D Lath, and Board Products, Gypsum
Part 200, Subpart S
  SS–P–361E Pipe, Clay (Vitrified Fittings, and Perforated Pipe)
Part 200, Subpart S
  SS–P–402A Plaster: Gypsum
Part 200, Subpart S
  SS–R–501D Roofing Felt, Asphalt-Prepared Smooth Surfaced
Part 200, Subpart S
  SS–R–630D Roofing Felt (Roll, Asphalt-Prepared, Mineral Surfaced)
Part 200, Subpart S
  SS–S–118B Sound Controlling Blocks and Boards (Acoustical Tiles and Panels, Prefabricated)
Part 200, Subpart S
  SS–S–291D Shingles: Asbestos-Cement, (Roofing)
Part 200, Subpart S
  SS–S–346C Siding (Shingles, Clapboards, and Sheets) Asbestos-Cement
Part 200, Subpart S
  SS–T–312B Tile Floor: Asphalt, Rubber, Vinyl-Asbestos
Part 200, Subpart S
  TT–C–598B Calking Compound, Oil and Resin Base Type (For Masonry and Other Structures)
Part 200, Subpart S
  TT–S–227B Sealer Compound; Rubber-Base Two Component (For Calking, Sealing) and Glazing in Building Construction
Part 200, Subpart S
  TT–S–230A Sealing Compound; Synthetic Rubber Base, Single Component, Chemically Curing for Calking, Sealing, and Glazing in Building Construction
Part 200, Subpart S
  TT–S–1543A (COM/NBS) Sealing Compound: Silicone Rubber Base (For Calking, Sealing, and Glazing in Buildings and Other Structures)
Part 200, Subpart S
  TT–S–1657A Ceiling Compound: Single Component Butyl Rubber Based Solvent Release Type for Buildings and Other Types of Construction
Part 200, Subpart S
  UU–B–790A Building Paper, Vegetable Fiber: (Kraft, Waterproofed, Water Repellent and Fire Resistant)
Part 200, Subpart S
  WW–P–405B Pipe, Corrugated (Iron or Steel, Zinc Coated)
Part 200, Subpart S
  WW–P–406D Pipe, Steel (Seamless and Welded) (For Ordinary Use)
Part 200, Subpart S
  WW–P–541E/GEN Plumbing Fixtures
Part 200, Subpart S
  CCC–W–408A Wall Covering, Vinyl-Coated
Part 200, Subpart S
  LLL–I–535B Insulation Board, Thermal Cellulosic Fiber
Part 200, Subpart S
  LLL–F–1238A Floor, Covering Linoleum
Part 200, Subpart S
Fir and Hemlock Door Association
Yeon Bldg., Portland, OR 97204
FHDA–7–79 Fir and Hemlock Door Association Standard
Part 200, Subpart S
Flat Glass Marketing Association
White Lakes Professional Bldg., 3310 Harrison St., Topeka, KS 66611
Glazing Manual–1980
Part 200, Subpart S
Glazing Sealing Systems Manual–1970
Part 200, Subpart S
Hydronics Institute
Yeon Bldg., Portland, OR 97204
IBR Guide C–30 Cooling Load Calculation for Guide for Residences–1965
Part 200, Subpart S
IBR Guide H–21 Heat Loss Calculation Guide–1977
Part 200, Subpart S
IBR Guide 200 Installation Guide for Residential Hydronic Heating Systems–1971
Part 200, Subpart S
IBR Ratings for Baseboard Radiation and Finned Tube (Commercial) Radiation–1980
Part 200, Subpart S
IBR Ratings for Cast Iron Boilers and SBI Ratings for Steel Boilers–1981
Part 200, Subpart S
Illuminating Engineering Society
345 E. 47th St., New York, NY 10017
Lighting Handbook; Reference Volume–1981
Part 200, Subpart S
Lighting Handbook; Application Volume–1981
Part 200, Subpart S
National Association of Home Builders
Research Foundation, 627 Southlawn Lane, Rockville, MD 20850
Insulation Manual for Homes and Apartments—1979
Part 200, Subpart S
National Board of Boiler and Pressure Vessel Inspectors
1055 Crupper Ave., Columbus, OH 43229
National Board Inspection Code–Manual for Boiler and Pressure Vessel Inspectors, 1979
Part 200, Subpart S
National Bureau of Standards and Technology (formerly the National Bureau of Standards)
Technology Bldg. B166, VPS Program, Washington, DC 20234
NBS SP 330 The International System of Units—1977
Part 200, Subpart S
NBS Dust Spot Method of Testing Air Filters—1957
Part 200, Subpart S
NBS 211 Building Code Requirements for Masonry (ANSI A 41.1)—1960
Part 200, Subpart S
NBS Handbook 74 Building Code Requirements for Reinforced Masonry (ANSI A 41.2)—1960
Part 200, Subpart S
National Concrete Masonry Association
P.O. Box 781, Herndon, VA 22070
Specifications for the Design and Construction of Load Bearing Concrete Masonry—August 1979
Part 200, Subpart S
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344-3555
NFPA 10–78 Installation of Portable Fire Extinguishers (ANSI Z 112.1)
Part 200, Subpart S
NFPA 13–75 Standard for the Installation of Sprinkler Systems (ANSI A 54.3)
Part 200, Subpart S
NFPA 14–78 Standard for the Installation of Standpipe and Hose Systems (ANSI Z 273.1)
Part 200, Subpart S
NFPA 72 A–79 Installation, Maintenance and Use of Local Protective Signaling Systems for Guard's Tour, Fire Alarm and Supervisory Service (ANSI SE 3.3)
Part 200, Subpart S
NFPA 72 B–79 Installation, Maintenance and Use of Auxiliary Protective Signaling Systems for Fire Alarm Service (ANSI SE 3.4)
Part 200, Subpart S
NFPA 72 C–75 Installation, Maintenance and Use of Remote Station Protective Signaling Systems (ANSI SE 3.5)
Part 200, Subpart S
NFPA 72 D–79 Installation, Maintenance and Use of Proprietary Protective Signaling Systems (ANSI SE 3.6)
Part 200, Subpart S
NFPA 72 E–78 Standard on Automatic Fire Detectors (ANSI SE 3.13)
Part 200, Subpart S
NFPA 80–77 Standard for Installation of Fire Doors and Windows (ANSI A 2.7)
Part 200, Subpart S
NFPA 82–77 Incinerators, Rubbish Handling (ANSI/NFPA 82)
Part 200, Subpart S
NFPA 252–79 Standard Methods of Fire Tests of Door Assemblies
Part 200, Subpart S
NFPA 253–78 Standard Methods of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
Part 200, Subpart S
NFPA 701–77 Standard Methods of Test for Flame-Resistant Textiles and Films
Part 200, Subpart S
National Forest Products Association
1619 Massachusetts Ave., NW, Washington, DC 20036
Span Tables for Joists and Rafters—1977
Part 200, Subpart S
National Design Specifications for Wood Construction—1977
Part 200, Subpart S
Technical Report No. 7—All Weather Wood Foundation System—1979
Part 200, Subpart S
National Oak Flooring Manufacturers Association
804 Sterick Bldg., Memphis, TN 38103
Official Grading Rules for Oak, Beech, Birch, Hard Maple and Pecan (OFGR/Vol. 1, No. 1/March 1977)
Part 200, Subpart S
National Roofing Contractors Assoc.
8600 Bryn Mawr Ave., Chicago, IL 60631
NRCA Roofing and Waterproofing Manual, 1981
Part 200, Subpart S
National Terrazzo & Mosaic Association, Inc.
Suite 15, 3166 Des Plaines Ave., Des Plaines, IL 60018
NTMA Terrazzo Specifications, Details and Technical Data—1981
Part 200, Subpart S
National Woodwork Manufacturers Association, Inc. (NWMA)
400 W. Madison St., Chicago, IL 60606
IS 1–80 Industry Standard for Wood Flush Doors
Part 200, Subpart S
IS 2–80 Industry Standard for Wood Window Units (ANSI A 200.1)
Part 200, Subpart S
IS 3–70 Industry Standard for Wood Sliding Patio Doors (ANSI A 200.4)
Part 200, Subpart S
IS 4–70 Industry Standard for Water-Repellent Preservative Non-Pressure Treatment of Millwork
Part 200, Subpart S
IS 5–73 Industry Standard for Ponderosa Pine Doors (ANSI A 200.2)
Part 200, Subpart S
Prestressed Concrete Institute
20 N. Wacker Dr., Chicago, IL 60606
PCI MNL 116 Manual for Quality Control for Plants and Production of Precast Prestressed Concrete Products—1977
Part 200, Subpart S
PCI MNL 117 Manual of Quality Control for Plants and Production of Architectural Precast Concrete Products—1977
Part 200, Subpart S
PCI MNL 121 Manual for Structural Design of Architectural Precast Concrete—1977
Part 200, Subpart S
Product Standard
National Institute of Standards and Technology (formerly the National Bureau of Standards), Washington, DC 20234
PS 1–74 Construction and Industrial Plywood
Part 200, Subpart S
PS 20–70 American Softwood Lumber Standard
Part 200, Subpart S
PS 27–70 Mosaic-Parquet Hardwood Slat Flooring
Part 200, Subpart S
PS 51–71 Hardwood and Decorative Plywood
Part 200, Subpart S
PS 56–73 Structural Glued Laminated Timber (ANSI A 190.1)
Part 200, Subpart S
PS 57–73 Cellulosic Fiber Insulation Board (ANSI A 194.1)
Part 200, Subpart S
PS 58–73 Basic Hardboard (ANSI A 135.4)
Part 200, Subpart S
PS 59–73 Prefinished Hardboard Paneling (ANSI 135.5)
Part 200, Subpart S
PS 60–73 Hardboard Siding (ANSI A 135.6)
Part 200, Subpart S
Resilient Floor Covering Institute
1030 15th St., NW, Suite 350, Washington, DC 20005
Recommended Installation Specifications for Vinyl Asbestos, Solid Vinyl and Asphalt Tile Floorings, 1978
Part 200, Subpart S
Safety Glazing Certification Council
1640 W. 32nd Ave., Hialeah, FL 33012
Certified Products Directory—Safety Glazing Materials—1981
Part 200, Subpart S
Southern California Association of Cabinet Manufacturers
1933 S. Broadway, L. 39, Los Angeles, CA 90007
Certified Construction Standards and Specifications, Guide for Uniform Cabinet Specifications—1973
Part 200, Subpart S
Southern Forest Products Association
P.O. Box 52468, New Orleans, LA 70152
Southern Pine Maximum Span for Joists and Rafters—1978
Part 200, Subpart S
Structural Engineers Association of California
217 Second St., San Francisco, CA 94105
Recommended Lateral Force Requirements and Commentary—1980
Part 200, Subpart S
Sump Pump Manufacturers Association
221 N. LaSalle St., Chicago, IL 60601
1976 Domestic Sump Pump Standards
Part 200, Subpart S
Tile Council of America, Inc.
Box 326, Princeton, NJ 08540
Handbook for Ceramic Tile Installation—1981
Part 200, Subpart S
Standard Specifications for Ceramic Tile (ANSI A 137.1)—1980
Part 200, Subpart S
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
Electrical Applicance and Utilization Equipment Directory—1980
Part 200, Subpart S
UL 58–81 Steel Underground Tanks for Flammable and Combustible Liquids (ANSI B 137.1)
Part 200, Subpart S
UL 70–79 Bituminous Coated Metal Septic Tanks (ANSI A 162.1)
Part 200, Subpart S
UL 80–80 Steel Inside Tanks for Oil-Burner Fuel (ANSI B 110.1)
Part 200, Subpart S
UL 127–71 Factory Built Fireplaces (ANSI A 131.3)
Part 200, Subpart S
UL 142–72 Steel Above Ground Tanks for Flammable and Combustible Liquids
Part 200, Subpart S
UL 174–79 Household Electric Storage Tank Water Heater (ANSI C 33.87)
Part 200, Subpart S
UL 217–80 Single and Multiple Station Smoke Detectors
Part 200, Subpart S
UL 296–80 Oil Burners (ANSI Z 96.2)
Part 200, Subpart S
UL 465–78 Central Cooling & Air Conditioners (ANSI B 144.1)
Part 200, Subpart S
UL 484–72 Room Air Conditioners (ANSI C 33.14)
Part 200, Subpart S
UL 559–75 Heat Pumps (ANSI B 191.1)
Part 200, Subpart S
UL 726–75 Oil-Fired Boiler Assemblies (ANSI Z 96.3)
Part 200, Subpart S
UL 727–80 Oil-Fired Central Furnaces (ANSI Z 96.1)
Part 200, Subpart S
UL 729–76 Oil-Fired Floor Furnaces (ANSI Z 96.4)
Part 200, Subpart S
UL 730–78 Oil-Fired Wall Furnaces (ANSI Z 96.5)
Part 200, Subpart S
UL 732–74 Oil-Fired Storage Tank Water Heaters (ANSI Z 95.3)
Part 200, Subpart S
UL 737–78 Fireplace Stoves (ANSI A 163.1)
Part 200, Subpart S
UL 790–78 Tests for Fire Resistance of Roof Covering Materials
Part 200, Subpart S
UL 1042–79 Electric Baseboard Heating Equipment (ANSI C 33.95)
Part 200, Subpart S
UL 1096–81 Electrical Central Air Heating Equipment (ANSI C 33.104)
Part 200, Subpart S
UL 1482–79 Room Heaters, Solid Fuel Type
Part 200, Subpart S
International Conference of Building Officials
5360 S. Workman Mill Road, Whittier, CA 90601
Uniform Building Code (UBC), 1979
Part 200, Subpart S
Department of Agriculture
Publications Division, Office of Governmental Affairs, 14th & Independence Ave., SW, Washington, DC 20050
Agriculture Handbook No. 72—Wood Handbook—1974
Part 200, Subpart S
Home and Garden Bulletin No. 64—Subterranean Termites—1979
Part 200, Subpart S
Home and Garden Bulletin No. 73—Wood Decay in Houses—How to Prevent and Control It—1977
Part 200, Subpart S
Department of Army, DOD
HDQA, DAEN: MPE–8, 20 Massachusetts Ave., NW, Washington, DC 20314
Technical Manual TM 5–809–10—Seismic Design for Buildings—1973
Part 200, Subpart S
Department of Health and Human Services
300 Independence Ave., SW, Washington, DC 20204
Public Health Service No. (HRA) 79–14500, Minimum Requirements of Construction and Equipment for Hospitals and Medical Facilities—August 1979
Part 200, Subpart S
Department of Housing and Urban Development
451 7th St., SW, Washington, DC 20410

HANDBOOKS:

  4460.1 REV Architectural Analysis and Inspection for Project Mortgage Insurance, Sec. 207–8/79 and changes 1–9
Part 200, Subpart S
  4920.1 Minimum Property Standards for Care–Type Housing—1973
Part 200, Subpart S
  4930.1 Manual of Acceptable Practices—1973 Rev.
Part 200, Subpart S
  4940.1 Minimum Property Standards for Semi-Private Swimming Pools and Wading Pools—10/72
Part 200, Subpart S
  4940.2 Minimum Property Standards for Community Water Supply Systems—8/73
Part 200, Subpart S
  4940.3 Minimum Design Standards for Community Sewerage Systems—11/72
Part 200, Subpart S
  4940.4 Minimum Design Standard for Rehabilitation for Residential Properties—8/78
Part 200, Subpart S
  4950.1 REV–1 Technical Suitability of Products Program—Processing Procedure—8/79
Part 200, Subpart S
  4950.2 Design Criteria for Trussed Rafters—12/72
Part 200, Subpart S
  Guide HM–G–7482.2 HUD Assisted Housing Maintenance Guide on Seamless Coating System—12/13/71
Part 200, Subpart S

USE OF MATERIALS BULLETINS:

  17E Concrete Roofing Tile—7/17/74
Part 200, Subpart S
  38H Grademarking of Lumber—7/31/79
Part 200, Subpart S
  39 Labels of Independent Programs for Certifying Aluminum Windows and Sliding Glass Doors—9/15/64
Part 200, Subpart S
  40B Grademarking of Plywood—6/5/75
Part 200, Subpart S
  44C HUD/FHA Standard for Carpet and Carpet Certification Program—2/22/78 (Plus Addendum 1 & 2)
Part 200, Subpart S
  48 Labels of Independent Programs for Certifying Pressure-Treated Lumber and Plywood—11/15/67 (Plus 5 Supplements)
Part 200, Subpart S
  52A Quality Certification and Labelling for Wood Flush Doors—10/7/75
Part 200, Subpart S
  57A Combination Subfloor/Underlayment Particleboard for Factory Built Modular Housing Units—11/27/73
Part 200, Subpart S
  58A Acrylic Plastic Sheets for Glazing—9/2/75
Part 200, Subpart S
  59A Labels Identifying Independent Certification of Wood Windows—7/16/74
Part 200, Subpart S
  60 Field Glued Plywood & Wood Frame Structural Floor Systems—12/9/70 (Plus 2 Supplements)
Part 200, Subpart S
  62A Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CSPE)—11/16/72
Part 200, Subpart S
  64B Textured Plywood Panel Siding—8/13/75
Part 200, Subpart S
  65 Controlled Density Cellular Concrete Floor Fill—10/11/73
Part 200, Subpart S
  66A Plywood Combination Subfloor/Underlayment Floor Panels—12/6/78
Part 200, Subpart S
  67 Polycarbonate Plastic Sheets for Glazing—9/3/75
Part 200, Subpart S
  69 Self Adhering Vinyl Asbestos Floor Tile—1/6/77
Part 200, Subpart S
  70 Particleboard Interior Stair Treads—8/16/76
Part 200, Subpart S
  71 Polystyrene Foam Insulation Sheathing Board—1/10/77
Part 200, Subpart S
  72 HUD Standard for Carpet Cushion—2/6/80
Part 200, Subpart S
  73 Plastic Bathtubs, Plastic Shower Stalls and Receptors, and Plastic Lavatories—4/27/78
Part 200, Subpart S
  76 Chlorinated Poly (Vinyl Chloride) CPVC and Polybutylene (PB) Hot and Cold Water Distribution Piping—4/25/78
Part 200, Subpart S
  77A Cast Iron Sanitary Drainage System with Hubless Pipe and Fittings—3/28/80
Part 200, Subpart S
  78 Polyethylene (PE), Acrylonitrile-Butadiene-Styrene (ABS), Poly (Vinyl Chloride) (PVC) and Polybutylene (PB) Plastic Piping and Domestic Cold Water Service—4/25/78
Part 200, Subpart S
  79 Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste and Vent Pipe and Fittings—4/25/78
Part 200, Subpart S
  80 Spray Applied Cellulosic Thermal Insulation—10/31/79
Part 200, Subpart S
U.S. Postal Service
475 L’Enfant Plaza, SW., Washington, DC 20024
U.S. Postal Service Requirements for Mail Boxes and Slots (Domestic Mail Manual, Sections 155, 156 & 157)—1979
Part 200, Subpart S
Water Quality Association
477 E. Butterfield Rd., Lombard, IL 60148
WQA S–100 Water Softeners—1975
Part 200, Subpart S
WQA S–200 Water Filters—1973
Part 200, Subpart S
Wood Moulding and Millwork Producers, Inc.
P.O. Box 2578, Portland, OR 97225
WM 2–73 Vinyl Wrapped Interior Moulding and Millwork
Part 200, Subpart S
WM 3–79 Exterior Wood Door Frames
Part 200, Subpart S

INTERMEDIATE MINIMUM PROPERTY STANDARDS SUPPLEMENT, SOLAR HEATING AND DOMESTIC HOT WATER SYSTEMS, 1982 EDITION:
Part 200, Subpart S

Air Conditioning and Refrigeration Institute
1815 N. Fort Myer Dr., Arlington, VA 22209
ARI 240–77 Air Source Unitary Heat Pump Equipment
Part 200, Subpart S
ARI 260–75 Application, Installation, and Servicing of Unitary Systems
Part 200, Subpart S
ARI 410–81 Forced–Circulation Air–Cooling and Air–Heating Coils
Part 200, Subpart S
ARI 760–80 Solenoid Valves for Use With Volatile Refrigerants
Part 200, Subpart S
American National Standards Institute
11 West 42nd Street, New York, NY 10036 Telephone: (212) 642–4900
ANSI A58.1–72 Minimum Design Loads in Buildings and Other Structures
Part 200, Subpart S
ANSI B 16.18–78 Cast Bronze Solder Joint Pressure Fittings
Part 200, Subpart S
ANSI Z 97.1–75 Performance Specifications and Methods of Tests for Safety Glazing Material Used in Buildings
Part 200, Subpart S
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME Boiler and Pressure Vessel Code Section IV, 1980 Edition: Addenda Summer 53–80
Part 200, Subpart S
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
ASTM A 53–79 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless
Part 200, Subpart S
ASTM C 739–77 Cellulose Fiber (Wool Base) Loose–Fill Insulation Sec. 10.4, Flame Resistance Permanency
Part 200, Subpart S
ASTM D 661–75 Evaluating Degree of Resistant to Cracking of Exterior Paints
Part 200, Subpart S
ASTM D 714–80 Evaluating Degree of Blistering of Paints
Part 200, Subpart S
ASTM D 772–47 (R 75) Evaluating Degree of Flaking (Scaling) of Exterior Paint
Part 200, Subpart S
ASTM D 882–80a Recommended Practice for Operating Light– and Water–Exposure Apparatus (Carbon–Arc Type) for Testing Paint, Varnish, Lacquer and Related Products
Part 200, Subpart S
ASTM D 1308–79 Effect of Household Chemicals on Clear and Pigmented Organic Finishes
Part 200, Subpart S
ASTM D 2247–68 (R 73) Coated Metal Specimens at 100 Percent Relative Humidity
Part 200, Subpart S
ASTM D 2570–79 Simulated Service Corrosion Testing of Engine Coolants
Part 200, Subpart S
ASTM D 2776–79 Corrosivity of Water in the Absence of Heat Transfer (Electrical Methods)
Part 200, Subpart S
ASTM E 72–77 Strength Tests of Panels for Building Construction
Part 200, Subpart S
ASTM E 84–80 Surface Burning Characteristics of Building Materials
Part 200, Subpart S
ASTM E 108–80a Fire Tests of Roof Coverings (NFPA 256)
Part 200, Subpart S
ASTM E 154–68 Materials for Use as Vapor Barriers Under Concrete Slabs and as Ground Cover in Crawl Spaces
Part 200, Subpart S
ASTM G 46–76 Recommended Practice for Examination and Evaluation of Pitting Corrosion
Part 200, Subpart S
ANSI/ASTM D 471–79 Test for Rubber Property–Effects of Liquids
Part 200, Subpart S
ANSI/ASTM D 660–44 Evaluating Degree of Resistence to Checking of Exterior Paints
Part 200, Subpart S
ANSI/ASTM D 750–68 Recommended Practice for Rubber Deterioration in Carbon–Arc or Weathering Apparatus
Part 200, Subpart S
ANSI/ASTM D 1081–60 Test for Evaluating Rubber Property–Sealing Pressure
Part 200, Subpart S
ANSI/ASTM D 1149–78 Test for Accelerated Ozone Cracking of Vulcanized Rubber
Part 200, Subpart S
ANSI/ASTM E 424–71 Test for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
Part 200, Subpart S
ANSI/ASTM F 146–80 Test for Fluid Resistance of Gasket Materials
Part 200, Subpart S
ANSI/ASTM G 1–72 Recommended Practice for Preparing, Cleaning and Evaluating Corrosion Test Specimens
Part 200, Subpart S
ANSI/ASTM G 16–71 Recommended Practice for Applying Statistics to Analysis of Corrosion Data
Part 200, Subpart S
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
345 E. 47th St., New York, NY 10017
ASHRAE 37–79 Method of Testing for Unitary Air Conditioning and Heat Pump Equipment
Part 200, Subpart S
ASHRAE 90–75 Energy Conservation in New Building Design
Part 200, Subpart S
ASHRAE 93–77 Methods of Testing Solar Collectors Based on Thermal Performance
Part 200, Subpart S
ASHRAE Handbooks–Fundamentals 1981
Part 200, Subpart S
American Society of Sanitary Engineers, Inc.
P.O. Box 9712, Bay Village, OH 44140
ASSE 1001–80 Pipe Applied Atmospheric Type Vacuum Breakers (ANSI A 112.1.1)
Part 200, Subpart S
ASSE 1011–70 Hose Connection Vacuum Breakers (ANSI A 112.1.3)
Part 200, Subpart S
ASSE 1012–78 Backflow Preventers With Intermediate Atmospheric Vent
Part 200, Subpart S
ASSE 1013–80 Reduced Pressure Principle Backflow Preventers
Part 200, Subpart S
ASSE 1015–80 Double Check Valve Type Back Pressure Backflow Preventers
Part 200, Subpart S
ASSE 1020–74 Vacuum Breakers, Anti-Siphon, Pressure Type (ANSI A 112.1.7–76)
Part 200, Subpart S
American Water Works Association
6666 W. Quincy Avenue, Denver, CO 80235
AWWA C 203–78 Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines Enamel and Tape-Hot-Applied (ANSI/AWWA C 203)
Part 200, Subpart S
AWWA C506–78 Backflow Prevention Devices-Reduced Pressure Principle and Double Check Valve Types
Part 200, Subpart S
AWWA D100–79 and 1981 Addendum Steel Tanks—Standpipes, Reservoirs and Elevated Tanks for Water Storage
Part 200, Subpart S
AWWA D102–78 Painting and Repainting Steel Tanks, Standpipes, Reservoirs, and Elevated Tanks for Water Storage
Part 200, Subpart S
Building Officials and Code Administrators International
17926 S. Halstead St., Homewood, IL 60430
Basic Mechanical Code–1981, Sec. M–302.0 Distribution, Exhaust and Return Systems
Part 200, Subpart S
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111-5098
Federal specifications:
  DD–G–451D Glass, Float or Plate, Sheet, Figured (Flat, For Glazing, Mirrors and Other Uses)
Part 200, Subpart S
  TT–P–95C Paint, Rubber; for Swimming Pools and Other Concrete and Masonary Surfaces and Amendment 1, 1977
Part 200, Subpart S
  TT–S–227B Sealer Compound; Rubber-Base Two Component (For Calking, Sealing) and Glazing in Building Construction
Part 200, Subpart S
  TT–S–230A Sealing Compound; Synthetic Rubber Base, Single Component, Chemically Curing for Calking, Sealing, and Glazing in Building Construction
Part 200, Subpart S
  TT–S–1543A (COM/NBS) Sealing Compound: Silicone Rubber Base (For Calking, Sealing, and Glazing in Buildings and Other Structures)
Part 200, Subpart S
  TT–S–1657A Ceiling Compound: Single Component Butyl Rubber Based Solvent Release Type for Buildings and Other Types of Construction
Part 200, Subpart S
  WW–U–516B–74 Unions, Brass and Bronze, Threaded Pipe Connections and Solder–Joint Tube Connections
Part 200, Subpart S
  WW–U–531E Unions, Pipe, Steel, or Malleable Iron; Threaded Connection, 150 lbs. and 250 lbs.
Part 200, Subpart S
  WW–V–35B Valve, Ball and Amendt.–1, 1975
Part 200, Subpart S
Military specifications:
  MIL–T–52777A (July 6, 1978) Military Specifications for Tanks: Storage, Underground, Glass Fiber Reinforced Plastic
Part 200, Subpart S
International Association of Plumbing and Mechanical Officials
5032 Alhambra Ave., Los Angeles, CA 90032
IAPMO PS 1–74 Prefabricated Concrete Septic Tanks
Part 200, Subpart S
IAPMO PS 31–77 Backflow Prevention Devices
Part 200, Subpart S
National Association of Corrosion Engineers
1440 South Creek, Houston, TX 77084
NACE Standard TM–01–69 (1976 Revision) Laboratory Corrosion Testing of Metals for the Process Industries
Part 200, Subpart S
NACE Standard TM–01–71 Autoclave Corrosion Testing of Metals in High Temperature Water
Part 200, Subpart S
NACE Standard TM–02–70 Method of Conducting Controlled Velocity Laboratory Corrosion Tests
Part 200, Subpart S
NACE Standard TM–02–74 Dynamic Corrosion Testing of Metals in High Temperature Water
Part 200, Subpart S
National Association of Plumbing, Heating, Cooling Contractors
1016 20th St., NW, Washington, DC 20036
National Standard Building Code, Sec. 2.13 Rustproofing, 1971
Part 200, Subpart S
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: 800 344-3555
NFPA 31–78 Standard for the Installation of Oil Burning Equipment (ANSI/NFPA 31) (ANSI Z 95.1)
Part 200, Subpart S
NFPA 54–80 National Fuel Gas Code (ANSI Z 223.1)
Part 200, Subpart S
NFPA 70–81 National Electric Code (ANSI/NFPA 70)
Part 200, Subpart S
NFPA 89 M–76 Clearances for Heat Producing Appliances
Part 200, Subpart S
NFPA 90 A–76 Air Conditioning and Ventilating Systems (ANSI NFPA 90 A) (ANSI B 144.2)
Part 200, Subpart S
NFPA 90 B–80 Warm Air Heating and Air Conditioning (ANSI/NFPA 90B) (ANSI B 144.3)
Part 200, Subpart S
NFPA 211–80 Chimneys, Fireplaces & Vents (ANSI/NFPA 211) (ANSI A 52.1)
Part 200, Subpart S
NFPA 321–76 Basic Classification of Flammable and Combustible Liquids
Part 200, Subpart S
National Roofing Contractors Assoc.
8600 Bryn Mawr Ave., Chicago, IL 60631
NRCA Roofing and Waterproofing Manual, 1981
Part 200, Subpart S
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
UL 58–81 Steel Underground Tanks for Flammable and Combustible Liquids (ANSI B 137.1)
Part 200, Subpart S
UL 174–79 Household Electric Storage Tank Water Heater (ANSI C 33.87)
Part 200, Subpart S
UL 296–80 Oil Burners (ANSI Z 96.2)
Part 200, Subpart S
UL 559–75 Heat Pumps (ANSI B 191.1)
Part 200, Subpart S
UL 726–75 Oil-Fired Boiler Assemblies (ANSI Z 96.3)
Part 200, Subpart S
UL 727–80 Oil-Fired Central Furnaces (ANSI Z 96.1)
Part 200, Subpart S
UL 730–74 Oil-Fired Wall Furnaces (ANSI Z 96.5)
Part 200, Subpart S
UL 732–74 Oil-Fired Storage Tank Water Heaters (ANSI Z 95.3)
Part 200, Subpart S
UL 1042–79 Electric Baseboard Heating Equipment (ANSI C 33.95)
Part 200, Subpart S

 



For questions or comments regarding e-CFR editorial content, features, or design, email ecfr@nara.gov.
For questions concerning e-CFR programming and delivery issues, email webteam@gpo.gov.