About GPO   |   Newsroom/Media   |   Congressional Relations   |   Inspector General   |   Careers   |   Contact   |   askGPO   |   Help  
 
Home   |   Customers   |   Vendors   |   Libraries  

The Electronic Code of Federal Regulations (e-CFR) is a regularly updated, unofficial editorial compilation of CFR material and Federal Register amendments produced by the National Archives and Records Administration's Office of the Federal Register (OFR) and the Government Printing Office.

Parallel Table of Authorities and Rules for the Code of Federal Regulations and the United States Code
Text | PDF

Find, review, and submit comments on Federal rules that are open for comment and published in the Federal Register using Regulations.gov.

Purchase individual CFR titles from the U.S. Government Online Bookstore.

Find issues of the CFR (including issues prior to 1996) at a local Federal depository library.

[1]
 
 

Electronic Code of Federal Regulations

blue pill

e-CFR Data is current as of August 21, 2014

Title 40Chapter ISubchapter CPart 60


TITLE 40—Protection of Environment

CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

SUBCHAPTER C—AIR PROGRAMS (CONTINUED)

PART 60—STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES

rule

Subpart A—GENERAL PROVISIONS

§60.1
Applicability.
§60.2
Definitions.
§60.3
Units and abbreviations.
§60.4
Address.
§60.5
Determination of construction or modification.
§60.6
Review of plans.
§60.7
Notification and record keeping.
§60.8
Performance tests.
§60.9
Availability of information.
§60.10
State authority.
§60.11
Compliance with standards and maintenance requirements.
§60.12
Circumvention.
§60.13
Monitoring requirements.
§60.14
Modification.
§60.15
Reconstruction.
§60.16
Priority list.
§60.17
Incorporations by reference.
§60.18
General control device and work practice requirements.
§60.19
General notification and reporting requirements.
Appendix
Table 1 to Subpart A of Part 60—Detection Sensitivity Levels (grams per hour)
rule

Subpart B—ADOPTION AND SUBMITTAL OF STATE PLANS FOR DESIGNATED FACILITIES

§60.20
Applicability.
§60.21
Definitions.
§60.22
Publication of guideline documents, emission guidelines, and final compliance times.
§60.23
Adoption and submittal of State plans; public hearings.
§60.24
Emission standards and compliance schedules.
§60.25
Emission inventories, source surveillance, reports.
§60.26
Legal authority.
§60.27
Actions by the Administrator.
§60.28
Plan revisions by the State.
§60.29
Plan revisions by the Administrator.
rule

Subpart C—EMISSION GUIDELINES AND COMPLIANCE TIMES

§60.30
Scope.
§60.31
Definitions.
rule

Subpart Ca—[RESERVED]

rule

Subpart Cb—EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR LARGE MUNICIPAL WASTE COMBUSTORS THAT ARE CONSTRUCTED ON OR BEFORE SEPTEMBER 20, 1994

§60.30b
Scope and delegation of authority.
§60.31b
Definitions.
§60.32b
Designated facilities.
§60.33b
Emission guidelines for municipal waste combustor metals, acid gases, organics, and nitrogen oxides.
§60.34b
Emission guidelines for municipal waste combustor operating practices.
§60.35b
Emission guidelines for municipal waste combustor operator training and certification.
§60.36b
Emission guidelines for municipal waste combustor fugitive ash emissions.
§60.37b
Emission guidelines for air curtain incinerators.
§60.38b
Compliance and performance testing.
§60.39b
Reporting and recordkeeping guidelines and compliance schedules.
Appendix
Table 1 to Subpart Cb of Part 60—Nitrogen Oxides Guidelines for Designated Facilities
Appendix
Table 2 to Subpart Cb of Part 60—Nitrogen Oxides Limits for Existing Designated Facilities Included in an Emissions Averaging Plan at a Municipal Waste Combustor Plant
Appendix
Table 3 to Subpart Cb of Part 60—Municipal Waste Combustor Operating Guidelines
rule

Subpart Cc—EMISSION GUIDELINES AND COMPLIANCE TIMES FOR MUNICIPAL SOLID WASTE LANDFILLS

§60.30c
Scope.
§60.31c
Definitions.
§60.32c
Designated facilities.
§60.33c
Emission guidelines for municipal solid waste landfill emissions.
§60.34c
Test methods and procedures.
§60.35c
Reporting and recordkeeping guidelines.
§60.36c
Compliance times.
rule

Subpart Cd—EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR SULFURIC ACID PRODUCTION UNITS

§60.30d
Designated facilities.
§60.31d
Emissions guidelines.
§60.32d
Compliance times.
rule

Subpart Ce—EMISSION GUIDELINES AND COMPLIANCE TIMES FOR HOSPITAL/MEDICAL/INFECTIOUS WASTE INCINERATORS

§60.30e
Scope.
§60.31e
Definitions.
§60.32e
Designated facilities.
§60.33e
Emissions guidelines.
§60.34e
Operator training and qualification guidelines.
§60.35e
Waste management guidelines.
§60.36e
Inspection guidelines.
§60.37e
Compliance, performance testing, and monitoring guidelines.
§60.38e
Reporting and recordkeeping guidelines.
§60.39e
Compliance times.
Appendix
Table 1A to Subpart Ce of Part 60—Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Defined in §60.32e(a)(1)
Appendix
Table 1B to Subpart Ce of Part 60—Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Defined in §60.32e(a)(1) and (a)(2)
Appendix
Table 2A to Subpart Ce of Part 60—Emissions Limits for Small HMIWI Which Meet the Criteria Under §60.33e(b)(1)
Appendix
Table 2B to Subpart Ce of Part 60—Emissions Limits for Small HMIWI Which Meet the Criteria Under §60.33e(b)(2)
rule

Subpart D—STANDARDS OF PERFORMANCE FOR FOSSIL-FUEL-FIRED STEAM GENERATORS

§60.40
Applicability and designation of affected facility.
§60.41
Definitions.
§60.42
Standard for particulate matter (PM).
§60.43
Standard for sulfur dioxide (SO2).
§60.44
Standard for nitrogen oxides (NOX).
§60.45
Emissions and fuel monitoring.
§60.46
Test methods and procedures.
rule

Subpart Da—STANDARDS OF PERFORMANCE FOR ELECTRIC UTILITY STEAM GENERATING UNITS

§60.40Da
Applicability and designation of affected facility.
§60.41Da
Definitions.
§60.42Da
Standards for particulate matter (PM).
§60.43Da
Standards for sulfur dioxide (SO2).
§60.44Da
Standards for nitrogen oxides (NOX).
§60.45Da
Alternative standards for combined nitrogen oxides (NOX) and carbon monoxide (CO).
§60.46Da
[Reserved]
§60.47Da
Commercial demonstration permit.
§60.48Da
Compliance provisions.
§60.49Da
Emission monitoring.
§60.50Da
Compliance determination procedures and methods.
§60.51Da
Reporting requirements.
§60.52Da
Recordkeeping requirements.
rule

Subpart Db—STANDARDS OF PERFORMANCE FOR INDUSTRIAL-COMMERCIAL-INSTITUTIONAL STEAM GENERATING UNITS

§60.40b
Applicability and delegation of authority.
§60.41b
Definitions.
§60.42b
Standard for sulfur dioxide (SO2).
§60.43b
Standard for particulate matter (PM).
§60.44b
Standard for nitrogen oxides (NOX).
§60.45b
Compliance and performance test methods and procedures for sulfur dioxide.
§60.46b
Compliance and performance test methods and procedures for particulate matter and nitrogen oxides.
§60.47b
Emission monitoring for sulfur dioxide.
§60.48b
Emission monitoring for particulate matter and nitrogen oxides.
§60.49b
Reporting and recordkeeping requirements.
rule

Subpart Dc—STANDARDS OF PERFORMANCE FOR SMALL INDUSTRIAL-COMMERCIAL-INSTITUTIONAL STEAM GENERATING UNITS

§60.40c
Applicability and delegation of authority.
§60.41c
Definitions.
§60.42c
Standard for sulfur dioxide (SO2).
§60.43c
Standard for particulate matter (PM).
§60.44c
Compliance and performance test methods and procedures for sulfur dioxide.
§60.45c
Compliance and performance test methods and procedures for particulate matter.
§60.46c
Emission monitoring for sulfur dioxide.
§60.47c
Emission monitoring for particulate matter.
§60.48c
Reporting and recordkeeping requirements.
rule

Subpart E—STANDARDS OF PERFORMANCE FOR INCINERATORS

§60.50
Applicability and designation of affected facility.
§60.51
Definitions.
§60.52
Standard for particulate matter.
§60.53
Monitoring of operations.
§60.54
Test methods and procedures.
rule

Subpart Ea—STANDARDS OF PERFORMANCE FOR MUNICIPAL WASTE COMBUSTORS FOR WHICH CONSTRUCTION IS COMMENCED AFTER DECEMBER 20, 1989 AND ON OR BEFORE SEPTEMBER 20, 1994

§60.50a
Applicability and delegation of authority.
§60.51a
Definitions.
§60.52a
Standard for municipal waste combustor metals.
§60.53a
Standard for municipal waste combustor organics.
§60.54a
Standard for municipal waste combustor acid gases.
§60.55a
Standard for nitrogen oxides.
§60.56a
Standards for municipal waste combustor operating practices.
§60.57a
[Reserved]
§60.58a
Compliance and performance testing.
§60.59a
Reporting and recordkeeping requirements.
rule

Subpart Eb—STANDARDS OF PERFORMANCE FOR LARGE MUNICIPAL WASTE COMBUSTORS FOR WHICH CONSTRUCTION IS COMMENCED AFTER SEPTEMBER 20, 1994 OR FOR WHICH MODIFICATION OR RECONSTRUCTION IS COMMENCED AFTER JUNE 19, 1996

§60.50b
Applicability and delegation of authority.
§60.51b
Definitions.
§60.52b
Standards for municipal waste combustor metals, acid gases, organics, and nitrogen oxides.
§60.53b
Standards for municipal waste combustor operating practices.
§60.54b
Standards for municipal waste combustor operator training and certification.
§60.55b
Standards for municipal waste combustor fugitive ash emissions.
§60.56b
Standards for air curtain incinerators.
§60.57b
Siting requirements.
§60.58b
Compliance and performance testing.
§60.59b
Reporting and recordkeeping requirements.
rule

Subpart Ec—STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES: HOSPITAL/MEDICAL/INFECTIOUS WASTE INCINERATORS

§60.50c
Applicability and delegation of authority.
§60.51c
Definitions.
§60.52c
Emission limits.
§60.53c
Operator training and qualification requirements.
§60.54c
Siting requirements.
§60.55c
Waste management plan.
§60.56c
Compliance and performance testing.
§60.57c
Monitoring requirements.
§60.58c
Reporting and recordkeeping requirements.
Appendix
Table 1A to Subpart Ec of Part 60—Emissions Limits for Small, Medium, and Large HMIWI at Affected Facilities as Defined in §60.50c(a)(1) and (2)
Appendix
Table 1B to Subpart Ec of Part 60—Emissions Limits for Small, Medium, and Large HMIWI at Affected Facilities as Defined in §60.50c(a)(3) and (4)
Appendix
Table 2 of Subpart Ec of Part 60—Toxic Equivalency Factors
Appendix
Table 3 to Subpart Ec of Part 60—Operating Parameters To Be Monitored and Minimum Measurement and Recording Frequencies
rule

Subpart F—STANDARDS OF PERFORMANCE FOR PORTLAND CEMENT PLANTS

§60.60
Applicability and designation of affected facility.
§60.61
Definitions.
§60.62
Standards.
§60.63
Monitoring of operations.
§60.64
Test methods and procedures.
§60.65
Recordkeeping and reporting requirements.
§60.66
Delegation of authority.
rule

Subpart G—STANDARDS OF PERFORMANCE FOR NITRIC ACID PLANTS

§60.70
Applicability and designation of affected facility.
§60.71
Definitions.
§60.72
Standard for nitrogen oxides.
§60.73
Emission monitoring.
§60.74
Test methods and procedures.
rule

Subpart Ga—STANDARDS OF PERFORMANCE FOR NITRIC ACID PLANTS FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER OCTOBER 14, 2011

§60.70a
Applicability and designation of affected facility.
§60.71a
Definitions.
§60.72a
Standards.
§60.73a
Emissions testing and monitoring.
§60.74a
Affirmative defense for violations of emission standards during malfunction.
§60.75a
Calculations.
§60.76a
Recordkeeping.
§60.77a
Reporting.
rule

Subpart H—STANDARDS OF PERFORMANCE FOR SULFURIC ACID PLANTS

§60.80
Applicability and designation of affected facility.
§60.81
Definitions.
§60.82
Standard for sulfur dioxide.
§60.83
Standard for acid mist.
§60.84
Emission monitoring.
§60.85
Test methods and procedures.
rule

Subpart I—STANDARDS OF PERFORMANCE FOR HOT MIX ASPHALT FACILITIES

§60.90
Applicability and designation of affected facility.
§60.91
Definitions.
§60.92
Standard for particulate matter.
§60.93
Test methods and procedures.
rule

Subpart J—STANDARDS OF PERFORMANCE FOR PETROLEUM REFINERIES

§60.100
Applicability, designation of affected facility, and reconstruction.
§60.101
Definitions.
§60.102
Standard for particulate matter.
§60.103
Standard for carbon monoxide.
§60.104
Standards for sulfur oxides.
§60.105
Monitoring of emissions and operations.
§60.106
Test methods and procedures.
§60.107
Reporting and recordkeeping requirements.
§60.108
Performance test and compliance provisions.
§60.109
Delegation of authority.
rule

Subpart Ja—STANDARDS OF PERFORMANCE FOR PETROLEUM REFINERIES FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER MAY 14, 2007

§60.100a
Applicability, designation of affected facility, and reconstruction.
§60.101a
Definitions.
§60.102a
Emissions limitations.
§60.103a
Design, equipment, work practice or operational standards.
§60.104a
Performance tests.
§60.105a
Monitoring of emissions and operations for fluid catalytic cracking units (FCCU) and fluid coking units (FCU).
§60.106a
Monitoring of emissions and operations for sulfur recovery plants.
§60.107a
Monitoring of emissions and operations for fuel gas combustion devices and flares.
§60.108a
Recordkeeping and reporting requirements.
§60.109a
Delegation of authority.
Appendix
Table 1 to Subpart Ja of Part 60—Molar Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents
rule

Subpart K—STANDARDS OF PERFORMANCE FOR STORAGE VESSELS FOR PETROLEUM LIQUIDS FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER JUNE 11, 1973, AND PRIOR TO MAY 19, 1978

§60.110
Applicability and designation of affected facility.
§60.111
Definitions.
§60.112
Standard for volatile organic compounds (VOC).
§60.113
Monitoring of operations.
rule

Subpart Ka—STANDARDS OF PERFORMANCE FOR STORAGE VESSELS FOR PETROLEUM LIQUIDS FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER MAY 18, 1978, AND PRIOR TO JULY 23, 1984

§60.110a
Applicability and designation of affected facility.
§60.111a
Definitions.
§60.112a
Standard for volatile organic compounds (VOC).
§60.113a
Testing and procedures.
§60.114a
Alternative means of emission limitation.
§60.115a
Monitoring of operations.
rule

Subpart Kb—STANDARDS OF PERFORMANCE FOR VOLATILE ORGANIC LIQUID STORAGE VESSELS (INCLUDING PETROLEUM LIQUID STORAGE VESSELS) FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER JULY 23, 1984

§60.110b
Applicability and designation of affected facility.
§60.111b
Definitions.
§60.112b
Standard for volatile organic compounds (VOC).
§60.113b
Testing and procedures.
§60.114b
Alternative means of emission limitation.
§60.115b
Reporting and recordkeeping requirements.
§60.116b
Monitoring of operations.
§60.117b
Delegation of authority.
rule

Subpart L—STANDARDS OF PERFORMANCE FOR SECONDARY LEAD SMELTERS

§60.120
Applicability and designation of affected facility.
§60.121
Definitions.
§60.122
Standard for particulate matter.
§60.123
Test methods and procedures.
rule

Subpart M—STANDARDS OF PERFORMANCE FOR SECONDARY BRASS AND BRONZE PRODUCTION PLANTS

§60.130
Applicability and designation of affected facility.
§60.131
Definitions.
§60.132
Standard for particulate matter.
§60.133
Test methods and procedures.
rule

Subpart N—STANDARDS OF PERFORMANCE FOR PRIMARY EMISSIONS FROM BASIC OXYGEN PROCESS FURNACES FOR WHICH CONSTRUCTION IS COMMENCED AFTER JUNE 11, 1973

§60.140
Applicability and designation of affected facility.
§60.141
Definitions.
§60.142
Standard for particulate matter.
§60.143
Monitoring of operations.
§60.144
Test methods and procedures.
rule

Subpart Na—STANDARDS OF PERFORMANCE FOR SECONDARY EMISSIONS FROM BASIC OXYGEN PROCESS STEELMAKING FACILITIES FOR WHICH CONSTRUCTION IS COMMENCED AFTER JANUARY 20, 1983

§60.140a
Applicability and designation of affected facilities.
§60.141a
Definitions.
§60.142a
Standards for particulate matter.
§60.143a
Monitoring of operations.
§60.144a
Test methods and procedures.
§60.145a
Compliance provisions.
rule

Subpart O—STANDARDS OF PERFORMANCE FOR SEWAGE TREATMENT PLANTS

§60.150
Applicability and designation of affected facility.
§60.151
Definitions.
§60.152
Standard for particulate matter.
§60.153
Monitoring of operations.
§60.154
Test methods and procedures.
§60.155
Reporting.
§60.156
Delegation of authority.
rule

Subpart P—STANDARDS OF PERFORMANCE FOR PRIMARY COPPER SMELTERS

§60.160
Applicability and designation of affected facility.
§60.161
Definitions.
§60.162
Standard for particulate matter.
§60.163
Standard for sulfur dioxide.
§60.164
Standard for visible emissions.
§60.165
Monitoring of operations.
§60.166
Test methods and procedures.
rule

Subpart Q—STANDARDS OF PERFORMANCE FOR PRIMARY ZINC SMELTERS

§60.170
Applicability and designation of affected facility.
§60.171
Definitions.
§60.172
Standard for particulate matter.
§60.173
Standard for sulfur dioxide.
§60.174
Standard for visible emissions.
§60.175
Monitoring of operations.
§60.176
Test methods and procedures.
rule

Subpart R—STANDARDS OF PERFORMANCE FOR PRIMARY LEAD SMELTERS

§60.180
Applicability and designation of affected facility.
§60.181
Definitions.
§60.182
Standard for particulate matter.
§60.183
Standard for sulfur dioxide.
§60.184
Standard for visible emissions.
§60.185
Monitoring of operations.
§60.186
Test methods and procedures.
rule

Subpart S—STANDARDS OF PERFORMANCE FOR PRIMARY ALUMINUM REDUCTION PLANTS

§60.190
Applicability and designation of affected facility.
§60.191
Definitions.
§60.192
Standard for fluorides.
§60.193
Standard for visible emissions.
§60.194
Monitoring of operations.
§60.195
Test methods and procedures.
rule

Subpart T—STANDARDS OF PERFORMANCE FOR THE PHOSPHATE FERTILIZER INDUSTRY: WET-PROCESS PHOSPHORIC ACID PLANTS

§60.200
Applicability and designation of affected facility.
§60.201
Definitions.
§60.202
Standard for fluorides.
§60.203
Monitoring of operations.
§60.204
Test methods and procedures.
rule

Subpart U—STANDARDS OF PERFORMANCE FOR THE PHOSPHATE FERTILIZER INDUSTRY: SUPERPHOSPHORIC ACID PLANTS

§60.210
Applicability and designation of affected facility.
§60.211
Definitions.
§60.212
Standard for fluorides.
§60.213
Monitoring of operations.
§60.214
Test methods and procedures.
rule

Subpart V—STANDARDS OF PERFORMANCE FOR THE PHOSPHATE FERTILIZER INDUSTRY: DIAMMONIUM PHOSPHATE PLANTS

§60.220
Applicability and designation of affected facility.
§60.221
Definitions.
§60.222
Standard for fluorides.
§60.223
Monitoring of operations.
§60.224
Test methods and procedures.
rule

Subpart W—STANDARDS OF PERFORMANCE FOR THE PHOSPHATE FERTILIZER INDUSTRY: TRIPLE SUPERPHOSPHATE PLANTS

§60.230
Applicability and designation of affected facility.
§60.231
Definitions.
§60.232
Standard for fluorides.
§60.233
Monitoring of operations.
§60.234
Test methods and procedures.
rule

Subpart X—STANDARDS OF PERFORMANCE FOR THE PHOSPHATE FERTILIZER INDUSTRY: GRANULAR TRIPLE SUPERPHOSPHATE STORAGE FACILITIES

§60.240
Applicability and designation of affected facility.
§60.241
Definitions.
§60.242
Standard for fluorides.
§60.243
Monitoring of operations.
§60.244
Test methods and procedures.
rule

Subpart Y—STANDARDS OF PERFORMANCE FOR COAL PREPARATION AND PROCESSING PLANTS

§60.250
Applicability and designation of affected facility.
§60.251
Definitions.
§60.252
Standards for thermal dryers.
§60.253
Standards for pneumatic coal-cleaning equipment.
§60.254
Standards for coal processing and conveying equipment, coal storage systems, transfer and loading systems, and open storage piles.
§60.255
Performance tests and other compliance requirements.
§60.256
Continuous monitoring requirements.
§60.257
Test methods and procedures.
§60.258
Reporting and recordkeeping.
rule

Subpart Z—STANDARDS OF PERFORMANCE FOR FERROALLOY PRODUCTION FACILITIES

§60.260
Applicability and designation of affected facility.
§60.261
Definitions.
§60.262
Standard for particulate matter.
§60.263
Standard for carbon monoxide.
§60.264
Emission monitoring.
§60.265
Monitoring of operations.
§60.266
Test methods and procedures.
rule

Subpart AA—STANDARDS OF PERFORMANCE FOR STEEL PLANTS: ELECTRIC ARC FURNACES CONSTRUCTED AFTER OCTOBER 21, 1974, AND ON OR BEFORE AUGUST 17, 1983

§60.270
Applicability and designation of affected facility.
§60.271
Definitions.
§60.272
Standard for particulate matter.
§60.273
Emission monitoring.
§60.274
Monitoring of operations.
§60.275
Test methods and procedures.
§60.276
Recordkeeping and reporting requirements.
rule

Subpart AAa—STANDARDS OF PERFORMANCE FOR STEEL PLANTS: ELECTRIC ARC FURNACES AND ARGON-OXYGEN DECARBURIZATION VESSELS CONSTRUCTED AFTER AUGUST 17, 1983

§60.270a
Applicability and designation of affected facility.
§60.271a
Definitions.
§60.272a
Standard for particulate matter.
§60.273a
Emission monitoring.
§60.274a
Monitoring of operations.
§60.275a
Test methods and procedures.
§60.276a
Recordkeeping and reporting requirements.
rule

Subpart BB—STANDARDS OF PERFORMANCE FOR KRAFT PULP MILLS

§60.280
Applicability and designation of affected facility.
§60.281
Definitions.
§60.282
Standard for particulate matter.
§60.283
Standard for total reduced sulfur (TRS).
§60.284
Monitoring of emissions and operations.
§60.285
Test methods and procedures.
rule

Subpart BBa—STANDARDS OF PERFORMANCE FOR KRAFT PULP MILL AFFECTED SOURCES FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER MAY 23, 2013

§60.280a
Applicability and designation of affected facility.
§60.281a
Definitions.
§60.282a
Standard for filterable particulate matter.
§60.283a
Standard for total reduced sulfur (TRS).
§60.284a
Monitoring of emissions and operations.
§60.285a
Test methods and procedures.
§60.286a
Affirmative defense for violations of emission standards during malfunction.
§60.287a
Recordkeeping.
§60.288a
Reporting.
rule

Subpart CC—STANDARDS OF PERFORMANCE FOR GLASS MANUFACTURING PLANTS

§60.290
Applicability and designation of affected facility.
§60.291
Definitions.
§60.292
Standards for particulate matter.
§60.293
Standards for particulate matter from glass melting furnace with modified-processes.
§§60.294-60.295
[Reserved]
§60.296
Test methods and procedures.
rule

Subpart DD—STANDARDS OF PERFORMANCE FOR GRAIN ELEVATORS

§60.300
Applicability and designation of affected facility.
§60.301
Definitions.
§60.302
Standard for particulate matter.
§60.303
Test methods and procedures.
§60.304
Modifications.
rule

Subpart EE—STANDARDS OF PERFORMANCE FOR SURFACE COATING OF METAL FURNITURE

§60.310
Applicability and designation of affected facility.
§60.311
Definitions and symbols.
§60.312
Standard for volatile organic compounds (VOC).
§60.313
Performance tests and compliance provisions.
§60.314
Monitoring of emissions and operations.
§60.315
Reporting and recordkeeping requirements.
§60.316
Test methods and procedures.
rule

Subpart FF—[RESERVED]

rule

Subpart GG—STANDARDS OF PERFORMANCE FOR STATIONARY GAS TURBINES

§60.330
Applicability and designation of affected facility.
§60.331
Definitions.
§60.332
Standard for nitrogen oxides.
§60.333
Standard for sulfur dioxide.
§60.334
Monitoring of operations.
§60.335
Test methods and procedures.
rule

Subpart HH—STANDARDS OF PERFORMANCE FOR LIME MANUFACTURING PLANTS

§60.340
Applicability and designation of affected facility.
§60.341
Definitions.
§60.342
Standard for particulate matter.
§60.343
Monitoring of emissions and operations.
§60.344
Test methods and procedures.
rule

Subpart KK—STANDARDS OF PERFORMANCE FOR LEAD-ACID BATTERY MANUFACTURING PLANTS

§60.370
Applicability and designation of affected facility.
§60.371
Definitions.
§60.372
Standards for lead.
§60.373
Monitoring of emissions and operations.
§60.374
Test methods and procedures.
rule

Subpart LL—STANDARDS OF PERFORMANCE FOR METALLIC MINERAL PROCESSING PLANTS

§60.380
Applicability and designation of affected facility.
§60.381
Definitions.
§60.382
Standard for particulate matter.
§60.383
Reconstruction.
§60.384
Monitoring of operations.
§60.385
Recordkeeping and reporting requirements.
§60.386
Test methods and procedures.
rule

Subpart MM—STANDARDS OF PERFORMANCE FOR AUTOMOBILE AND LIGHT DUTY TRUCK SURFACE COATING OPERATIONS

§60.390
Applicability and designation of affected facility.
§60.391
Definitions.
§60.392
Standards for volatile organic compounds.
§60.393
Performance test and compliance provisions.
§60.394
Monitoring of emissions and operations.
§60.395
Reporting and recordkeeping requirements.
§60.396
Reference methods and procedures.
§60.397
Modifications.
§60.398
Innovative technology waivers.
rule

Subpart NN—STANDARDS OF PERFORMANCE FOR PHOSPHATE ROCK PLANTS

§60.400
Applicability and designation of affected facility.
§60.401
Definitions.
§60.402
Standard for particulate matter.
§60.403
Monitoring of emissions and operations.
§60.404
Test methods and procedures.
rule

Subpart PP—STANDARDS OF PERFORMANCE FOR AMMONIUM SULFATE MANUFACTURE

§60.420
Applicability and designation of affected facility.
§60.421
Definitions.
§60.422
Standards for particulate matter.
§60.423
Monitoring of operations.
§60.424
Test methods and procedures.
rule

Subpart QQ—STANDARDS OF PERFORMANCE FOR THE GRAPHIC ARTS INDUSTRY: PUBLICATION ROTOGRAVURE PRINTING

§60.430
Applicability and designation of affected facility.
§60.431
Definitions and notations.
§60.432
Standard for volatile organic compounds.
§60.433
Performance test and compliance provisions.
§60.434
Monitoring of operations and recordkeeping.
§60.435
Test methods and procedures.
rule

Subpart RR—STANDARDS OF PERFORMANCE FOR PRESSURE SENSITIVE TAPE AND LABEL SURFACE COATING OPERATIONS

§60.440
Applicability and designation of affected facility.
§60.441
Definitions and symbols.
§60.442
Standard for volatile organic compounds.
§60.443
Compliance provisions.
§60.444
Performance test procedures.
§60.445
Monitoring of operations and recordkeeping.
§60.446
Test methods and procedures.
§60.447
Reporting requirements.
rule

Subpart SS—STANDARDS OF PERFORMANCE FOR INDUSTRIAL SURFACE COATING: LARGE APPLIANCES

§60.450
Applicability and designation of affected facility.
§60.451
Definitions.
§60.452
Standard for volatile organic compounds.
§60.453
Performance test and compliance provisions.
§60.454
Monitoring of emissions and operations.
§60.455
Reporting and recordkeeping requirements.
§60.456
Test methods and procedures.
rule

Subpart TT—STANDARDS OF PERFORMANCE FOR METAL COIL SURFACE COATING

§60.460
Applicability and designation of affected facility.
§60.461
Definitions.
§60.462
Standards for volatile organic compounds.
§60.463
Performance test and compliance provisions.
§60.464
Monitoring of emissions and operations.
§60.465
Reporting and recordkeeping requirements.
§60.466
Test methods and procedures.
rule

Subpart UU—STANDARDS OF PERFORMANCE FOR ASPHALT PROCESSING AND ASPHALT ROOFING MANUFACTURE

§60.470
Applicability and designation of affected facilities.
§60.471
Definitions.
§60.472
Standards for particulate matter.
§60.473
Monitoring of operations.
§60.474
Test methods and procedures.
rule

Subpart VV—STANDARDS OF PERFORMANCE FOR EQUIPMENT LEAKS OF VOC IN THE SYNTHETIC ORGANIC CHEMICALS MANUFACTURING INDUSTRY FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER JANUARY 5, 1981, AND ON OR BEFORE NOVEMBER 7, 2006

§60.480
Applicability and designation of affected facility.
§60.481
Definitions.
§60.482-1
Standards: General.
§60.482-2
Standards: Pumps in light liquid service.
§60.482-3
Standards: Compressors.
§60.482-4
Standards: Pressure relief devices in gas/vapor service.
§60.482-5
Standards: Sampling connection systems.
§60.482-6
Standards: Open-ended valves or lines.
§60.482-7
Standards: Valves in gas/vapor service and in light liquid service.
§60.482-8
Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and connectors.
§60.482-9
Standards: Delay of repair.
§60.482-10
Standards: Closed vent systems and control devices.
§60.483-1
Alternative standards for valves—allowable percentage of valves leaking.
§60.483-2
Alternative standards for valves—skip period leak detection and repair.
§60.484
Equivalence of means of emission limitation.
§60.485
Test methods and procedures.
§60.486
Recordkeeping requirements.
§60.487
Reporting requirements.
§60.488
Reconstruction.
§60.489
List of chemicals produced by affected facilities.
rule

Subpart VVa—STANDARDS OF PERFORMANCE FOR EQUIPMENT LEAKS OF VOC IN THE SYNTHETIC ORGANIC CHEMICALS MANUFACTURING INDUSTRY FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER NOVEMBER 7, 2006

§60.480a
Applicability and designation of affected facility.
§60.481a
Definitions.
§60.482-1a
Standards: General.
§60.482-2a
Standards: Pumps in light liquid service.
§60.482-3a
Standards: Compressors.
§60.482-4a
Standards: Pressure relief devices in gas/vapor service.
§60.482-5a
Standards: Sampling connection systems.
§60.482-6a
Standards: Open-ended valves or lines.
§60.482-7a
Standards: Valves in gas/vapor service and in light liquid service.
§60.482-8a
Standards: Pumps, valves, and connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service.
§60.482-9a
Standards: Delay of repair.
§60.482-10a
Standards: Closed vent systems and control devices.
§60.482-11a
Standards: Connectors in gas/vapor service and in light liquid service.
§60.483-1a
Alternative standards for valves—allowable percentage of valves leaking.
§60.483-2a
Alternative standards for valves—skip period leak detection and repair.
§60.484a
Equivalence of means of emission limitation.
§60.485a
Test methods and procedures.
§60.486a
Recordkeeping requirements.
§60.487a
Reporting requirements.
§60.488a
Reconstruction.
§60.489a
List of chemicals produced by affected facilities.
rule

Subpart WW—STANDARDS OF PERFORMANCE FOR THE BEVERAGE CAN SURFACE COATING INDUSTRY

§60.490
Applicability and designation of affected facility.
§60.491
Definitions.
§60.492
Standards for volatile organic compounds.
§60.493
Performance test and compliance provisions.
§60.494
Monitoring of emissions and operations.
§60.495
Reporting and recordkeeping requirements.
§60.496
Test methods and procedures.
rule

Subpart XX—STANDARDS OF PERFORMANCE FOR BULK GASOLINE TERMINALS

§60.500
Applicability and designation of affected facility.
§60.501
Definitions.
§60.502
Standard for Volatile Organic Compound (VOC) emissions from bulk gasoline terminals.
§60.503
Test methods and procedures.
§60.504
[Reserved]
§60.505
Reporting and recordkeeping.
§60.506
Reconstruction.
rule

Subpart AAA—STANDARDS OF PERFORMANCE FOR NEW RESIDENTIAL WOOD HEATERS

§60.530
Applicability and designation of affected facility.
§60.531
Definitions.
§60.532
Standards for particulate matter.
§60.533
Compliance and certification.
§60.534
Test methods and procedures.
§60.535
Laboratory accreditation.
§60.536
Permanent label, temporary label, and owner's manual.
§60.537
Reporting and recordkeeping.
§60.538
Prohibitions.
§60.539
Hearing and appeal procedures.
§60.539a
Delegation of authority.
§60.539b
General provisions exclusions.
rule

Subpart BBB—STANDARDS OF PERFORMANCE FOR THE RUBBER TIRE MANUFACTURING INDUSTRY

§60.540
Applicability and designation of affected facilities.
§60.541
Definitions.
§60.542
Standards for volatile organic compounds.
§60.542a
Alternate standard for volatile organic compounds.
§60.543
Performance test and compliance provisions.
§60.544
Monitoring of operations.
§60.545
Recordkeeping requirements.
§60.546
Reporting requirements.
§60.547
Test methods and procedures.
§60.548
Delegation of authority.
rule

Subpart CCC—[RESERVED]

rule

Subpart DDD—STANDARDS OF PERFORMANCE FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS FROM THE POLYMER MANUFACTURING INDUSTRY

§60.560
Applicability and designation of affected facilities.
§60.561
Definitions.
§60.562-1
Standards: Process emissions.
§60.562-2
Standards: Equipment leaks of VOC.
§60.563
Monitoring requirements.
§60.564
Test methods and procedures.
§60.565
Reporting and recordkeeping requirements.
§60.566
Delegation of authority.
rule

Subpart EEE—[RESERVED]

rule

Subpart FFF—STANDARDS OF PERFORMANCE FOR FLEXIBLE VINYL AND URETHANE COATING AND PRINTING

§60.580
Applicability and designation of affected facility.
§60.581
Definitions and symbols.
§60.582
Standard for volatile organic compounds.
§60.583
Test methods and procedures.
§60.584
Monitoring of operations and recordkeeping requirements.
§60.585
Reporting requirements.
rule

Subpart GGG—STANDARDS OF PERFORMANCE FOR EQUIPMENT LEAKS OF VOC IN PETROLEUM REFINERIES FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER JANUARY 4, 1983, AND ON OR BEFORE NOVEMBER 7, 2006

§60.590
Applicability and designation of affected facility.
§60.591
Definitions.
§60.592
Standards.
§60.593
Exceptions.
rule

Subpart GGGa—STANDARDS OF PERFORMANCE FOR EQUIPMENT LEAKS OF VOC IN PETROLEUM REFINERIES FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER NOVEMBER 7, 2006

§60.590a
Applicability and designation of affected facility.
§60.591a
Definitions.
§60.592a
Standards.
§60.593a
Exceptions.
rule

Subpart HHH—STANDARDS OF PERFORMANCE FOR SYNTHETIC FIBER PRODUCTION FACILITIES

§60.600
Applicability and designation of affected facility.
§60.601
Definitions.
§60.602
Standard for volatile organic compounds.
§60.603
Performance test and compliance provisions.
§60.604
Reporting requirements.
rule

Subpart III—STANDARDS OF PERFORMANCE FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS FROM THE SYNTHETIC ORGANIC CHEMICAL MANUFACTURING INDUSTRY (SOCMI) AIR OXIDATION UNIT PROCESSES

§60.610
Applicability and designation of affected facility.
§60.611
Definitions.
§60.612
Standards.
§60.613
Monitoring of emissions and operations.
§60.614
Test methods and procedures.
§60.615
Reporting and recordkeeping requirements.
§60.616
Reconstruction.
§60.617
Chemicals affected by subpart III.
§60.618
Delegation of authority.
rule

Subpart JJJ—STANDARDS OF PERFORMANCE FOR PETROLEUM DRY CLEANERS

§60.620
Applicability and designation of affected facility.
§60.621
Definitions.
§60.622
Standards for volatile organic compounds.
§60.623
Equivalent equipment and procedures.
§60.624
Test methods and procedures.
§60.625
Recordkeeping requirements.
rule

Subpart KKK—STANDARDS OF PERFORMANCE FOR EQUIPMENT LEAKS OF VOC FROM ONSHORE NATURAL GAS PROCESSING PLANTS FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER JANUARY 20, 1984, AND ON OR BEFORE AUGUST 23, 2011

§60.630
Applicability and designation of affected facility.
§60.631
Definitions.
§60.632
Standards.
§60.633
Exceptions.
§60.634
Alternative means of emission limitation.
§60.635
Recordkeeping requirements.
§60.636
Reporting requirements.
rule

Subpart LLL—STANDARDS OF PERFORMANCE FOR SO2 EMISSIONS FROM ONSHORE NATURAL GAS PROCESSING FOR WHICH CONSTRUCTION, RECONSTRUCTION, OR MODIFICATION COMMENCED AFTER JANUARY 20, 1984, AND ON OR BEFORE AUGUST 23, 2011

§60.640
Applicability and designation of affected facilities.
§60.641
Definitions.
§60.642
Standards for sulfur dioxide.
§60.643
Compliance provisions.
§60.644
Test methods and procedures.
§60.645
[Reserved]
§60.646
Monitoring of emissions and operations.
§60.647
Recordkeeping and reporting requirements.
§60.648
Optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure.
rule

Subpart MMM—[RESERVED]

rule

Subpart NNN—STANDARDS OF PERFORMANCE FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS FROM SYNTHETIC ORGANIC CHEMICAL MANUFACTURING INDUSTRY (SOCMI) DISTILLATION OPERATIONS

§60.660
Applicability and designation of affected facility.
§60.661
Definitions.
§60.662
Standards.
§60.663
Monitoring of emissions and operations.
§60.664
Test methods and procedures.
§60.665
Reporting and recordkeeping requirements.
§60.666
Reconstruction.
§60.667
Chemicals affected by subpart NNN.
§60.668
Delegation of authority.
rule

Subpart OOO—STANDARDS OF PERFORMANCE FOR NONMETALLIC MINERAL PROCESSING PLANTS

§60.670
Applicability and designation of affected facility.
§60.671
Definitions.
§60.672
Standard for particulate matter (PM).
§60.673
Reconstruction.
§60.674
Monitoring of operations.
§60.675
Test methods and procedures.
§60.676
Reporting and recordkeeping.
Appendix
Table 1 to Subpart OOO of Part 60—Exceptions to Applicability of Subpart A to Subpart OOO
Appendix
Table 2 to Subpart OOO of Part 60—Stack Emission Limits for Affected Facilities With Capture Systems
Appendix
Table 3 to Subpart OOO of Part 60—Fugitive Emission Limits
rule

Subpart PPP—STANDARD OF PERFORMANCE FOR WOOL FIBERGLASS INSULATION MANUFACTURING PLANTS

§60.680
Applicability and designation of affected facility.
§60.681
Definitions.
§60.682
Standard for particulate matter.
§60.683
Monitoring of operations.
§60.684
Recordkeeping and reporting requirements.
§60.685
Test methods and procedures.
rule

Subpart QQQ—STANDARDS OF PERFORMANCE FOR VOC EMISSIONS FROM PETROLEUM REFINERY WASTEWATER SYSTEMS

§60.690
Applicability and designation of affected facility.
§60.691
Definitions.
§60.692-1
Standards: General.
§60.692-2
Standards: Individual drain systems.
§60.692-3
Standards: Oil-water separators.
§60.692-4
Standards: Aggregate facility.
§60.692-5
Standards: Closed vent systems and control devices.
§60.692-6
Standards: Delay of repair.
§60.692-7
Standards: Delay of compliance.
§60.693-1
Alternative standards for individual drain systems.
§60.693-2
Alternative standards for oil-water separators.
§60.694
Permission to use alternative means of emission limitation.
§60.695
Monitoring of operations.
§60.696
Performance test methods and procedures and compliance provisions.
§60.697
Recordkeeping requirements.
§60.698
Reporting requirements.
§60.699
Delegation of authority.
rule

Subpart RRR—STANDARDS OF PERFORMANCE FOR VOLATILE ORGANIC COMPOUND EMISSIONS FROM SYNTHETIC ORGANIC CHEMICAL MANUFACTURING INDUSTRY (SOCMI) REACTOR PROCESSES

§60.700
Applicability and designation of affected facility.
§60.701
Definitions.
§60.702
Standards.
§60.703
Monitoring of emissions and operations.
§60.704
Test methods and procedures.
§60.705
Reporting and recordkeeping requirements.
§60.706
Reconstruction.
§60.707
Chemicals affected by subpart RRR.
§60.708
Delegation of authority.
rule

Subpart SSS—STANDARDS OF PERFORMANCE FOR MAGNETIC TAPE COATING FACILITIES

§60.710
Applicability and designation of affected facility.
§60.711
Definitions, symbols, and cross reference tables.
§60.712
Standards for volatile organic compounds.
§60.713
Compliance provisions.
§60.714
Installation of monitoring devices and recordkeeping.
§60.715
Test methods and procedures.
§60.716
Permission to use alternative means of emission limitation.
§60.717
Reporting and monitoring requirements.
§60.718
Delegation of authority.
rule

Subpart TTT—STANDARDS OF PERFORMANCE FOR INDUSTRIAL SURFACE COATING: SURFACE COATING OF PLASTIC PARTS FOR BUSINESS MACHINES

§60.720
Applicability and designation of affected facility.
§60.721
Definitions.
§60.722
Standards for volatile organic compounds.
§60.723
Performance tests and compliance provisions.
§60.724
Reporting and recordkeeping requirements.
§60.725
Test methods and procedures.
§60.726
Delegation of authority.
rule

Subpart UUU—STANDARDS OF PERFORMANCE FOR CALCINERS AND DRYERS IN MINERAL INDUSTRIES

§60.730
Applicability and designation of affected facility.
§60.731
Definitions.
§60.732
Standards for particulate matter.
§60.733
Reconstruction.
§60.734
Monitoring of emissions and operations.
§60.735
Recordkeeping and reporting requirements.
§60.736
Test methods and procedures.
§60.737
Delegation of authority.
rule

Subpart VVV—STANDARDS OF PERFORMANCE FOR POLYMERIC COATING OF SUPPORTING SUBSTRATES FACILITIES

§60.740
Applicability and designation of affected facility.
§60.741
Definitions, symbols, and cross-reference tables.
§60.742
Standards for volatile organic compounds.
§60.743
Compliance provisions.
§60.744
Monitoring requirements.
§60.745
Test methods and procedures.
§60.746
Permission to use alternative means of emission limitation.
§60.747
Reporting and recordkeeping requirements.
§60.748
Delegation of authority.
rule

Subpart WWW—STANDARDS OF PERFORMANCE FOR MUNICIPAL SOLID WASTE LANDFILLS

§60.750
Applicability, designation of affected facility, and delegation of authority.
§60.751
Definitions.
§60.752
Standards for air emissions from municipal solid waste landfills.
§60.753
Operational standards for collection and control systems.
§60.754
Test methods and procedures.
§60.755
Compliance provisions.
§60.756
Monitoring of operations.
§60.757
Reporting requirements.
§60.758
Recordkeeping requirements.
§60.759
Specifications for active collection systems.
rule

Subpart AAAA—STANDARDS OF PERFORMANCE FOR SMALL MUNICIPAL WASTE COMBUSTION UNITS FOR WHICH CONSTRUCTION IS COMMENCED AFTER AUGUST 30, 1999 OR FOR WHICH MODIFICATION OR RECONSTRUCTION IS COMMENCED AFTER JUNE 6, 2001

Introduction

§60.1000
What does this subpart do?
§60.1005
When does this subpart become effective?

Applicability

§60.1010
Does this subpart apply to my municipal waste combustion unit?
§60.1015
What is a new municipal waste combustion unit?
§60.1020
Does this subpart allow any exemptions?
§60.1025
Do subpart E new source performance standards also apply to my municipal waste combustion unit?
§60.1030
Can the Administrator delegate authority to enforce these Federal new source performance standards to a State agency?
§60.1035
How are these new source performance standards structured?
§60.1040
Do all five components of these new source performance standards apply at the same time?
§60.1045
Are there different subcategories of small municipal waste combustion units within this subpart?

Preconstruction Requirements: Materials Separation Plan

§60.1050
Who must submit a materials separation plan?
§60.1055
What is a materials separation plan?
§60.1060
What steps must I complete for my materials separation plan?
§60.1065
What must I include in my draft materials separation plan?
§60.1070
How do I make my draft materials separation plan available to the public?
§60.1075
When must I accept comments on the materials separation plan?
§60.1080
Where and when must I hold a public meeting on my draft materials separation plan?
§60.1085
What must I do with any public comments I receive during the public comment period on my draft materials separation plan?
§60.1090
What must I do with my revised materials separation plan?
§60.1095
What must I include in the public meeting on my revised materials separation plan?
§60.1100
What must I do with any public comments I receive on my revised materials separation plan?
§60.1105
How do I submit my final materials separation plan?

Preconstruction Requirements: Siting Analysis

§60.1110
Who must submit a siting analysis?
§60.1115
What is a siting analysis?
§60.1120
What steps must I complete for my siting analysis?
§60.1125
What must I include in my siting analysis?
§60.1130
How do I make my siting analysis available to the public?
§60.1135
When must I accept comments on the siting analysis and revised materials separation plan?
§60.1140
Where and when must I hold a public meeting on the siting analysis?
§60.1145
What must I do with any public comments I receive during the public comment period on my siting analysis?
§60.1150
How do I submit my siting analysis?

Good Combustion Practices: Operator Training

§60.1155
What types of training must I do?
§60.1160
Who must complete the operator training course? By when?
§60.1165
Who must complete the plant-specific training course?
§60.1170
What plant-specific training must I provide?
§60.1175
What information must I include in the plant-specific operating manual?
§60.1180
Where must I keep the plant-specific operating manual?

Good Combustion Practices: Operator Certification

§60.1185
What types of operator certification must the chief facility operator and shift supervisor obtain and by when must they obtain it?
§60.1190
After the required date for operator certification, who may operate the municipal waste combustion unit?
§60.1195
What if all the certified operators must be temporarily offsite?

Good Combustion Practices: Operating Requirements

§60.1200
What are the operating practice requirements for my municipal waste combustion unit?
§60.1205
What happens to the operating requirements during periods of startup, shutdown, and malfunction?

Emission Limits

§60.1210
What pollutants are regulated by this subpart?
§60.1215
What emission limits must I meet? By when?
§60.1220
What happens to the emission limits during periods of startup, shutdown, and malfunction?

Continuous Emission Monitoring

§60.1225
What types of continuous emission monitoring must I perform?
§60.1230
What continuous emission monitoring systems must I install for gaseous pollutants?
§60.1235
How are the data from the continuous emission monitoring systems used?
§60.1240
How do I make sure my continuous emission monitoring systems are operating correctly?
§60.1245
Am I exempt from any appendix B or appendix F requirements to evaluate continuous emission monitoring systems?
§60.1250
What is my schedule for evaluating continuous emission monitoring systems?
§60.1255
What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?
§60.1260
What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems and is the data collection requirement enforceable?
§60.1265
How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?
§60.1270
What is required for my continuous opacity monitoring system and how are the data used?
§60.1275
What additional requirements must I meet for the operation of my continuous emission monitoring systems and continuous opacity monitoring system?
§60.1280
What must I do if any of my continuous emission monitoring systems are temporarily unavailable to meet the data collection requirements?

Stack Testing

§60.1285
What types of stack tests must I conduct?
§60.1290
How are the stack test data used?
§60.1295
What schedule must I follow for the stack testing?
§60.1300
What test methods must I use to stack test?
§60.1305
May I conduct stack testing less often?
§60.1310
May I deviate from the 13-month testing schedule if unforeseen circumstances arise?

Other Monitoring Requirements

§60.1315
Must I meet other requirements for continuous monitoring?
§60.1320
How do I monitor the load of my municipal waste combustion unit?
§60.1325
How do I monitor the temperature of flue gases at the inlet of my particulate matter control device?
§60.1330
How do I monitor the injection rate of activated carbon?
§60.1335
What is the minimum amount of monitoring data I must collect with my continuous parameter monitoring systems and is the data collection requirement enforceable?

Recordkeeping

§60.1340
What records must I keep?
§60.1345
Where must I keep my records and for how long?
§60.1350
What records must I keep for the materials separation plan and siting analysis?
§60.1355
What records must I keep for operator training and certification?
§60.1360
What records must I keep for stack tests?
§60.1365
What records must I keep for continuously monitored pollutants or parameters?
§60.1370
What records must I keep for municipal waste combustion units that use activated carbon?

Reporting

§60.1375
What reports must I submit before I submit my notice of construction?
§60.1380
What must I include in my notice of construction?
§60.1385
What reports must I submit after I submit my notice of construction and in what form?
§60.1390
What are the appropriate units of measurement for reporting my data?
§60.1395
When must I submit the initial report?
§60.1400
What must I include in my initial report?
§60.1405
When must I submit the annual report?
§60.1410
What must I include in my annual report?
§60.1415
What must I do if I am out of compliance with the requirements of this subpart?
§60.1420
If a semiannual report is required, when must I submit it?
§60.1425
What must I include in the semiannual out-of-compliance reports?
§60.1430
Can reporting dates be changed?

Air Curtain Incinerators that Burn 100 Percent Yard Waste

§60.1435
What is an air curtain incinerator?
§60.1440
What is yard waste?
§60.1445
What are the emission limits for air curtain incinerators that burn 100 percent yard waste?
§60.1450
How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?
§60.1455
What are the recordkeeping and reporting requirements for air curtain incinerators that burn 100 percent yard waste?

Equations

§60.1460
What equations must I use?

Definitions

§60.1465
What definitions must I know?
Appendix
Table 1 to Subpart AAAA of Part 60—Emission Limits for New Small Municipal Waste Combustion Units
Appendix
Table 2 to Subpart AAAA of Part 60—Carbon Monoxide Emission Limits for New Small Municipal Waste Combustion Units
Appendix
Table 3 of Subpart AAAA of Part 60—Requirements for Validating Continuous Emission Monitoring Systems (CEMS)
Appendix
Table 4 of Subpart AAAA of Part 60—Requirements for Continuous Emission Monitoring Systems (CEMS)
Appendix
Table 5 of Subpart AAAA of Part 60—Requirements for Stack Tests
rule

Subpart BBBB—EMISSION GUIDELINES AND COMPLIANCE TIMES FOR SMALL MUNICIPAL WASTE COMBUSTION UNITS CONSTRUCTED ON OR BEFORE AUGUST 30, 1999

Introduction

§60.1500
What is the purpose of this subpart?
§60.1505
Am I affected by this subpart?
§60.1510
Is a State plan required for all States?
§60.1515
What must I include in my State plan?
§60.1520
Is there an approval process for my State plan?
§60.1525
What if my State plan is not approvable?
§60.1530
Is there an approval process for a negative declaration letter?
§60.1535
What compliance schedule must I include in my State plan?
§60.1540
Are there any State plan requirements for this subpart that supersede the requirements specified in subpart B?
§60.1545
Does this subpart directly affect municipal waste combustion unit owners and operators in my State?

Applicability of State Plans

§60.1550
What municipal waste combustion units must I address in my State plan?
§60.1555
Are any small municipal waste combustion units exempt from my State plan?
§60.1560
Can an affected municipal waste combustion unit reduce its capacity to less than 35 tons per day rather than comply with my State plan?
§60.1565
What subcategories of small municipal waste combustion units must I include in my State plan?

Use of Model Rule

§60.1570
What is the “model rule” in this subpart?
§60.1575
How does the model rule relate to the required elements of my State plan?
§60.1580
What are the principal components of the model rule?

Model Rule—Increments of Progress

§60.1585
What are my requirements for meeting increments of progress and achieving final compliance?
§60.1590
When must I complete each increment of progress?
§60.1595
What must I include in the notifications of achievement of my increments of progress?
§60.1600
When must I submit the notifications of achievement of increments of progress?
§60.1605
What if I do not meet an increment of progress?
§60.1610
How do I comply with the increment of progress for submittal of a control plan?
§60.1615
How do I comply with the increment of progress for awarding contracts?
§60.1620
How do I comply with the increment of progress for initiating onsite construction?
§60.1625
How do I comply with the increment of progress for completing onsite construction?
§60.1630
How do I comply with the increment of progress for achieving final compliance?
§60.1635
What must I do if I close my municipal waste combustion unit and then restart my municipal waste combustion unit?
§60.1640
What must I do if I plan to permanently close my municipal waste combustion unit and not restart it?

Model Rule—Good Combustion Practices: Operator Training

§60.1645
What types of training must I do?
§60.1650
Who must complete the operator training course? By when?
§60.1655
Who must complete the plant-specific training course?
§60.1660
What plant-specific training must I provide?
§60.1665
What information must I include in the plant-specific operating manual?
§60.1670
Where must I keep the plant-specific operating manual?

Model Rule—Good Combustion Practices: Operator Certification

§60.1675
What types of operator certification must the chief facility operator and shift supervisor obtain and by when must they obtain it?
§60.1680
After the required date for operator certification, who may operate the municipal waste combustion unit?
§60.1685
What if all the certified operators must be temporarily offsite?

Model Rule—Good Combustion Practices: Operating Requirements

§60.1690
What are the operating practice requirements for my municipal waste combustion unit?
§60.1695
What happens to the operating requirements during periods of startup, shutdown, and malfunction?

Model Rule—Emission Limits

§60.1700
What pollutants are regulated by this subpart?
§60.1705
What emission limits must I meet? By when?
§60.1710
What happens to the emission limits during periods of startup, shutdown, and malfunction?

Model Rule—Continuous Emission Monitoring

§60.1715
What types of continuous emission monitoring must I perform?
§60.1720
What continuous emission monitoring systems must I install for gaseous pollutants?
§60.1725
How are the data from the continuous emission monitoring systems used?
§60.1730
How do I make sure my continuous emission monitoring systems are operating correctly?
§60.1735
Am I exempt from any appendix B or appendix F requirements to evaluate continuous emission monitoring systems?
§60.1740
What is my schedule for evaluating continuous emission monitoring systems?
§60.1745
What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?
§60.1750
What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems and is the data collection requirement enforceable?
§60.1755
How do I convert my 1-hour arithmetic averages into appropriate averaging times and units?
§60.1760
What is required for my continuous opacity monitoring system and how are the data used?
§60.1765
What additional requirements must I meet for the operation of my continuous emission monitoring systems and continuous opacity monitoring system?
§60.1770
What must I do if any of my continuous emission monitoring systems are temporarily unavailable to meet the data collection requirements?

Model Rule—Stack Testing

§60.1775
What types of stack tests must I conduct?
§60.1780
How are the stack test data used?
§60.1785
What schedule must I follow for the stack testing?
§60.1790
What test methods must I use to stack test?
§60.1795
May I conduct stack testing less often?
§60.1800
May I deviate from the 13-month testing schedule if unforeseen circumstances arise?

Model Rule—Other Monitoring Requirements

§60.1805
Must I meet other requirements for continuous monitoring?
§60.1810
How do I monitor the load of my municipal waste combustion unit?
§60.1815
How do I monitor the temperature of flue gases at the inlet of my particulate matter control device?
§60.1820
How do I monitor the injection rate of activated carbon?
§60.1825
What is the minimum amount of monitoring data I must collect with my continuous parameter monitoring systems and is the data collection requirement enforceable?

Model Rule—Recordkeeping

§60.1830
What records must I keep?
§60.1835
Where must I keep my records and for how long?
§60.1840
What records must I keep for operator training and certification?
§60.1845
What records must I keep for stack tests?
§60.1850
What records must I keep for continuously monitored pollutants or parameters?
§60.1855
What records must I keep for municipal waste combustion units that use activated carbon?

Model Rule—Reporting

§60.1860
What reports must I submit and in what form?
§60.1865
What are the appropriate units of measurement for reporting my data?
§60.1870
When must I submit the initial report?
§60.1875
What must I include in my initial report?
§60.1880
When must I submit the annual report?
§60.1885
What must I include in my annual report?
§60.1890
What must I do if I am out of compliance with the requirements of this subpart?
§60.1895
If a semiannual report is required, when must I submit it?
§60.1900
What must I include in the semiannual out-of-compliance reports?
§60.1905
Can reporting dates be changed?

Model Rule—Air Curtain Incinerators That Burn 100 Percent Yard Waste

§60.1910
What is an air curtain incinerator?
§60.1915
What is yard waste?
§60.1920
What are the emission limits for air curtain incinerators that burn 100 percent yard waste?
§60.1925
How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?
§60.1930
What are the recordkeeping and reporting requirements for air curtain incinerators that burn 100 percent yard waste?

Equations

§60.1935
What equations must I use?

Definitions

§60.1940
What definitions must I know?
Appendix
Table 1 to Subpart BBBB of Part 60—Model Rule—Compliance Schedules and Increments of Progress
Appendix
Table 2 to Subpart BBBB of Part 60—Model Rule—Class I Emission Limits for Existing Small Municipal Waste Combustion Units
Appendix
Table 3 to Subpart BBBB of Part 60—Model Rule—Class I Nitrogen Oxides Emission Limits for Existing Small Municipal Waste Combustion Units
Appendix
Table 4 to Subpart BBBB of Part 60—Model Rule—Class II Emission Limits for Existing Small Municipal Waste Combustion Unit
Appendix
Table 5 to Subpart BBBB of Part 60—Model Rule—Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units
Appendix
Table 6 to Subpart BBBB of Part 60—Model Rule—Requirements for Validating Continuous Emission Monitoring Systems (CEMS)
Appendix
Table 7 to Subpart BBBB of Part 60—Model Rule—Requirements for Continuous Emission Monitoring Systems (CEMS)
Appendix
Table 8 to Subpart BBBB of Part 60—Model Rule—Requirements for Stack Tests
rule

Subpart CCCC—STANDARDS OF PERFORMANCE FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS

Introduction

§60.2000
What does this subpart do?
§60.2005
When does this subpart become effective?

Applicability

§60.2010
Does this subpart apply to my incineration unit?
§60.2015
What is a new incineration unit?
§60.2020
What combustion units are exempt from this subpart?
§60.2030
Who implements and enforces this subpart?
§60.2035
How are these new source performance standards structured?
§60.2040
Do all eleven components of these new source performance standards apply at the same time?

Preconstruction Siting Analysis

§60.2045
Who must prepare a siting analysis?
§60.2050
What is a siting analysis?

Waste Management Plan

§60.2055
What is a waste management plan?
§60.2060
When must I submit my waste management plan?
§60.2065
What should I include in my waste management plan?

Operator Training and Qualification

§60.2070
What are the operator training and qualification requirements?
§60.2075
When must the operator training course be completed?
§60.2080
How do I obtain my operator qualification?
§60.2085
How do I maintain my operator qualification?
§60.2090
How do I renew my lapsed operator qualification?
§60.2095
What site-specific documentation is required?
§60.2100
What if all the qualified operators are temporarily not accessible?

Emission Limitations and Operating Limits

§60.2105
What emission limitations must I meet and by when?
§60.2110
What operating limits must I meet and by when?
§60.2115
What if I do not use a wet scrubber, fabric filter, activated carbon injection, selective noncatalytic reduction, an electrostatic precipitator, or a dry scrubber to comply with the emission limitations?
§60.2120
Affirmative defense for violation of emission standards during malfunction.

Performance Testing

§60.2125
How do I conduct the initial and annual performance test?
§60.2130
How are the performance test data used?

Initial Compliance Requirements

§60.2135
How do I demonstrate initial compliance with the emission limitations and establish the operating limits?
§60.2140
By what date must I conduct the initial performance test?
§60.2141
By what date must I conduct the initial air pollution control device inspection?

Continuous Compliance Requirements

§60.2145
How do I demonstrate continuous compliance with the emission limitations and the operating limits?
§60.2150
By what date must I conduct the annual performance test?
§60.2151
By what date must I conduct the annual air pollution control device inspection?
§60.2155
May I conduct performance testing less often?
§60.2160
May I conduct a repeat performance test to establish new operating limits?

Monitoring

§60.2165
What monitoring equipment must I install and what parameters must I monitor?
§60.2170
Is there a minimum amount of monitoring data I must obtain?

Recordkeeping and Reporting

§60.2175
What records must I keep?
§60.2180
Where and in what format must I keep my records?
§60.2185
What reports must I submit?
§60.2190
What must I submit prior to commencing construction?
§60.2195
What information must I submit prior to initial startup?
§60.2200
What information must I submit following my initial performance test?
§60.2205
When must I submit my annual report?
§60.2210
What information must I include in my annual report?
§60.2215
What else must I report if I have a deviation from the operating limits or the emission limitations?
§60.2220
What must I include in the deviation report?
§60.2225
What else must I report if I have a deviation from the requirement to have a qualified operator accessible?
§60.2230
Are there any other notifications or reports that I must submit?
§60.2235
In what form can I submit my reports?
§60.2240
Can reporting dates be changed?

Title V Operating Permits

§60.2242
Am I required to apply for and obtain a Title V operating permit for my unit?

Air Curtain Incinerators

§60.2245
What is an air curtain incinerator?
§60.2250
What are the emission limitations for air curtain incinerators?
§60.2255
How must I monitor opacity for air curtain incinerators?
§60.2260
What are the recordkeeping and reporting requirements for air curtain incinerators?

Definitions

§60.2265
What definitions must I know?
Appendix
Table 1 to Subpart CCCC of Part 60—Emission Limitations for CISWI Units for Which Construction is Commenced After November 30, 1999, But no Later Than June 4, 2010, or for Which Modification or Reconstruction is Commenced on or After June 1, 2001, But no Later Than August 7, 2013
Appendix
Table 2 to Subpart CCCC of Part 60—Operating Limits for Wet Scrubbers
Appendix
Table 3 to Subpart CCCC of Part 60—Toxic Equivalency Factors
Appendix
Table 4 to Subpart CCCC of Part 60—Summary of Reporting Requirements
Appendix
Table 5 to Subpart CCCC of Part 60—Emission Limitations for Incinerators That Commenced Construction After June 4, 2010, or That Commenced Reconstruction or Modification After August 7, 2013
Appendix
Table 6 to Subpart CCCC of Part 60—Emission Limitations for Energy Recovery Units That Commenced Construction After June 4, 2010, or That Commenced Reconstruction or Modification After August 7, 2013
Appendix
Table 7 to Subpart CCCC of Part 60—Emission Limitations for Waste-burning Kilns That Commenced Construction After June 4, 2010, or Reconstruction or Modification After August 7, 2013
Appendix
Table 8 to Subpart CCCC of Part 60—Emission Limitations for Small, Remote Incinerators That Commenced Construction After June 4, 2010, Or That Commenced Reconstruction or Modification After August 7, 2013
rule

Subpart DDDD—EMISSIONS GUIDELINES AND COMPLIANCE TIMES FOR COMMERCIAL AND INDUSTRIAL SOLID WASTE INCINERATION UNITS

Introduction

§60.2500
What is the purpose of this subpart?
§60.2505
Am I affected by this subpart?
§60.2510
Is a State plan required for all States?
§60.2515
What must I include in my State plan?
§60.2520
Is there an approval process for my State plan?
§60.2525
What if my state plan is not approvable?
§60.2530
Is there an approval process for a negative declaration letter?
§60.2535
What compliance schedule must I include in my State plan?
§60.2540
Are there any State plan requirements for this subpart that apply instead of the requirements specified in subpart B?
§60.2541
In lieu of a state plan submittal, are there other acceptable option(s) for a state to meet its Clean Air Act section 111(d)/129(b)(2) obligations?
§60.2542
What authorities will not be delegated to state, local, or tribal agencies?
§60.2545
Does this subpart directly affect CISWI unit owners and operators in my State?

Applicability of State Plans

§60.2550
What CISWI units must I address in my State plan?
§60.2555
What combustion units are exempt from my State plan?

Use of Model Rule

§60.2560
What is the “model rule” in this subpart?
§60.2565
How does the model rule relate to the required elements of my State plan?
§60.2570
What are the principal components of the model rule?

Model Rule—Increments of Progress

§60.2575
What are my requirements for meeting increments of progress and achieving final compliance?
§60.2580
When must I complete each increment of progress?
§60.2585
What must I include in the notifications of achievement of increments of progress?
§60.2590
When must I submit the notifications of achievement of increments of progress?
§60.2595
What if I do not meet an increment of progress?
§60.2600
How do I comply with the increment of progress for submittal of a control plan?
§60.2605
How do I comply with the increment of progress for achieving final compliance?
§60.2610
What must I do if I close my CISWI unit and then restart it?
§60.2615
What must I do if I plan to permanently close my CISWI unit and not restart it?

Model Rule—Waste Management Plan

§60.2620
What is a waste management plan?
§60.2625
When must I submit my waste management plan?
§60.2630
What should I include in my waste management plan?

Model Rule—Operator Training and Qualification

§60.2635
What are the operator training and qualification requirements?
§60.2640
When must the operator training course be completed?
§60.2645
How do I obtain my operator qualification?
§60.2650
How do I maintain my operator qualification?
§60.2655
How do I renew my lapsed operator qualification?
§60.2660
What site-specific documentation is required?
§60.2665
What if all the qualified operators are temporarily not accessible?

Model Rule—Emission Limitations and Operating Limits

§60.2670
What emission limitations must I meet and by when?
§60.2675
What operating limits must I meet and by when?
§60.2680
What if I do not use a wet scrubber, fabric filter, activated carbon injection, selective noncatalytic reduction, an electrostatic precipitator, or a dry scrubber to comply with the emission limitations?
§60.2685
Affirmative defense for violation of emission standards during malfunction.

Model Rule—Performance Testing

§60.2690
How do I conduct the initial and annual performance test?
§60.2695
How are the performance test data used?

Model Rule—Initial Compliance Requirements

§60.2700
How do I demonstrate initial compliance with the amended emission limitations and establish the operating limits?
§60.2705
By what date must I conduct the initial performance test?
§60.2706
By what date must I conduct the initial air pollution control device inspection?

Model Rule—Continuous Compliance Requirements

§60.2710
How do I demonstrate continuous compliance with the amended emission limitations and the operating limits?
§60.2715
By what date must I conduct the annual performance test?
§60.2716
By what date must I conduct the annual air pollution control device inspection?
§60.2720
May I conduct performance testing less often?
§60.2725
May I conduct a repeat performance test to establish new operating limits?

Model Rule—Monitoring

§60.2730
What monitoring equipment must I install and what parameters must I monitor?
§60.2735
Is there a minimum amount of monitoring data I must obtain?

Model Rule—Recordkeeping and Reporting

§60.2740
What records must I keep?
§60.2745
Where and in what format must I keep my records?
§60.2750
What reports must I submit?
§60.2755
When must I submit my waste management plan?
§60.2760
What information must I submit following my initial performance test?
§60.2765
When must I submit my annual report?
§60.2770
What information must I include in my annual report?
§60.2775
What else must I report if I have a deviation from the operating limits or the emission limitations?
§60.2780
What must I include in the deviation report?
§60.2785
What else must I report if I have a deviation from the requirement to have a qualified operator accessible?
§60.2790
Are there any other notifications or reports that I must submit?
§60.2795
In what form can I submit my reports?
§60.2800
Can reporting dates be changed?

Model Rule—Title V Operating Permits

§60.2805
Am I required to apply for and obtain a Title V operating permit for my unit?

Model Rule—Air Curtain Incinerators

§60.2810
What is an air curtain incinerator?
§60.2815
What are my requirements for meeting increments of progress and achieving final compliance?
§60.2820
When must I complete each increment of progress?
§60.2825
What must I include in the notifications of achievement of increments of progress?
§60.2830
When must I submit the notifications of achievement of increments of progress?
§60.2835
What if I do not meet an increment of progress?
§60.2840
How do I comply with the increment of progress for submittal of a control plan?
§60.2845
How do I comply with the increment of progress for achieving final compliance?
§60.2850
What must I do if I close my air curtain incinerator and then restart it?
§60.2855
What must I do if I plan to permanently close my air curtain incinerator and not restart it?
§60.2860
What are the emission limitations for air curtain incinerators?
§60.2865
How must I monitor opacity for air curtain incinerators?
§60.2870
What are the recordkeeping and reporting requirements for air curtain incinerators?

Model Rule—Definitions

§60.2875
What definitions must I know?
Appendix
Table 1 to Subpart DDDD of Part 60—Model Rule—Increments of Progress and Compliance Schedules
Appendix
Table 2 to Subpart DDDD of Part 60—Model Rule—Emission Limitations That Apply to Incinerators Before [Date to be specified in state plan]
Appendix
Table 3 to Subpart DDDD of Part 60—Model Rule—Operating Limits for Wet Scrubbers
Appendix
Table 4 to Subpart DDDD of Part 60—Model Rule—Toxic Equivalency Factors
Appendix
Table 5 to Subpart DDDD of Part 60—Model Rule—Summary of Reporting Requirements
Appendix
Table 6 to Subpart DDDD of Part 60—Model Rule—Emission Limitations That Apply to Incinerators on and After [Date to be specified in state plan]
Appendix
Table 7 to Subpart DDDD of Part 60—Model Rule—Emission Limitations That Apply to Energy Recovery Units After May 20, 2011
Appendix
Table 8 to Subpart DDDD of Part 60—Model Rule—Emission Limitations That Apply to Waste-Burning Kilns After May 20, 2011
Appendix
Table 9 to Subpart DDDD of Part 60—Model Rule—Emission Limitations That Apply to Small, Remote Incinerators After May 20, 2011
rule

Subpart EEEE—STANDARDS OF PERFORMANCE FOR OTHER SOLID WASTE INCINERATION UNITS FOR WHICH CONSTRUCTION IS COMMENCED AFTER DECEMBER 9, 2004, OR FOR WHICH MODIFICATION OR RECONSTRUCTION IS COMMENCED ON OR AFTER JUNE 16, 2006

Introduction

§60.2880
What does this subpart do?
§60.2881
When does this subpart become effective?

Applicability

§60.2885
Does this subpart apply to my incineration unit?
§60.2886
What is a new incineration unit?
§60.2887
What combustion units are excluded from this subpart?
§60.2888
Are air curtain incinerators regulated under this subpart?
§60.2889
Who implements and enforces this subpart?
§60.2890
How are these new source performance standards structured?
§60.2891
Do all components of these new source performance standards apply at the same time?

Preconstruction Siting Analysis

§60.2894
Who must prepare a siting analysis?
§60.2895
What is a siting analysis?

Waste Management Plan

§60.2899
What is a waste management plan?
§60.2900
When must I submit my waste management plan?
§60.2901
What should I include in my waste management plan?

Operator Training and Qualification

§60.2905
What are the operator training and qualification requirements?
§60.2906
When must the operator training course be completed?
§60.2907
How do I obtain my operator qualification?
§60.2908
How do I maintain my operator qualification?
§60.2909
How do I renew my lapsed operator qualification?
§60.2910
What site-specific documentation is required?
§60.2911
What if all the qualified operators are temporarily not accessible?

Emission Limitations and Operating Limits

§60.2915
What emission limitations must I meet and by when?
§60.2916
What operating limits must I meet and by when?
§60.2917
What if I do not use a wet scrubber to comply with the emission limitations?
§60.2918
What happens during periods of startup, shutdown, and malfunction?

Performance Testing

§60.2922
How do I conduct the initial and annual performance test?
§60.2923
How are the performance test data used?

Initial Compliance Requirements

§60.2927
How do I demonstrate initial compliance with the emission limitations and establish the operating limits?
§60.2928
By what date must I conduct the initial performance test?

Continuous Compliance Requirements

§60.2932
How do I demonstrate continuous compliance with the emission limitations and the operating limits?
§60.2933
By what date must I conduct the annual performance test?
§60.2934
May I conduct performance testing less often?
§60.2935
May I conduct a repeat performance test to establish new operating limits?

Monitoring

§60.2939
What continuous emission monitoring systems must I install?
§60.2940
How do I make sure my continuous emission monitoring systems are operating correctly?
§60.2941
What is my schedule for evaluating continuous emission monitoring systems?
§60.2942
What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems, and is the data collection requirement enforceable?
§60.2943
How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?
§60.2944
What operating parameter monitoring equipment must I install, and what operating parameters must I monitor?
§60.2945
Is there a minimum amount of operating parameter monitoring data I must obtain?

Recordkeeping and Reporting

§60.2949
What records must I keep?
§60.2950
Where and in what format must I keep my records?
§60.2951
What reports must I submit?
§60.2952
What must I submit prior to commencing construction?
§60.2953
What information must I submit prior to initial startup?
§60.2954
What information must I submit following my initial performance test?
§60.2955
When must I submit my annual report?
§60.2956
What information must I include in my annual report?
§60.2957
What else must I report if I have a deviation from the operating limits or the emission limitations?
§60.2958
What must I include in the deviation report?
§60.2959
What else must I report if I have a deviation from the requirement to have a qualified operator accessible?
§60.2960
Are there any other notifications or reports that I must submit?
§60.2961
In what form can I submit my reports?
§60.2962
Can reporting dates be changed?

Title V Operating Permits

§60.2966
Am I required to apply for and obtain a title V operating permit for my unit?
§60.2967
When must I submit a title V permit application for my new unit?

Temporary-Use Incinerators and Air Curtain Incinerators Used in Disaster Recovery

§60.2969
What are the requirements for temporary-use incinerators and air curtain incinerators used in disaster recovery?

Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste

§60.2970
What is an air curtain incinerator?
§60.2971
What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
§60.2972
How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
§60.2973
What are the recordkeeping and reporting requirements for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
§60.2974
Am I required to apply for and obtain a title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and yard waste?

Equations

§60.2975
What equations must I use?

Definitions

§60.2977
What definitions must I know?
Appendix
Table 1 to Subpart EEEE of Part 60—Emission Limitations
Appendix
Table 2 to Subpart EEEE of Part 60—Operating Limits for Incinerators and Wet Scrubbers
Appendix
Table 3 to Subpart EEEE of Part 60—Requirements for Continuous Emission Monitoring Systems (CEMS)
Appendix
Table 4 to Subpart EEEE of Part 60—Summary of Reporting Requirements
rule

Subpart FFFF—EMISSION GUIDELINES AND COMPLIANCE TIMES FOR OTHER SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE DECEMBER 9, 2004

Introduction

§60.2980
What is the purpose of this subpart?
§60.2981
Am I affected by this subpart?
§60.2982
Is a State plan required for all States?
§60.2983
What must I include in my State plan?
§60.2984
Is there an approval process for my State plan?
§60.2985
What if my State plan is not approvable?
§60.2986
Is there an approval process for a negative declaration letter?
§60.2987
What compliance schedule must I include in my State plan?
§60.2988
Are there any State plan requirements for this subpart that apply instead of the requirements specified in subpart B of this part?
§60.2989
Does this subpart directly affect incineration unit owners and operators in my State?
§60.2990
What Authorities are withheld by EPA?

Applicability of State Plans

§60.2991
What incineration units must I address in my State plan?
§60.2992
What is an existing incineration unit?
§60.2993
Are any combustion units excluded from my State plan?
§60.2994
Are air curtain incinerators regulated under this subpart?

Model Rule—Use of Model Rule

§60.2996
What is the purpose of the “model rule” in this subpart?
§60.2997
How does the model rule relate to the required elements of my State plan?
§60.2998
What are the principal components of the model rule?

Model Rule—Compliance Schedule

§60.3000
When must I comply?
§60.3001
What must I do if I close my OSWI unit and then restart it?
§60.3002
What must I do if I plan to permanently close my OSWI unit and not restart it?

Model Rule—Waste Management Plan

§60.3010
What is a waste management plan?
§60.3011
When must I submit my waste management plan?
§60.3012
What should I include in my waste management plan?

Model Rule—Operator Training and Qualification

§60.3014
What are the operator training and qualification requirements?
§60.3015
When must the operator training course be completed?
§60.3016
How do I obtain my operator qualification?
§60.3017
How do I maintain my operator qualification?
§60.3018
How do I renew my lapsed operator qualification?
§60.3019
What site-specific documentation is required?
§60.3020
What if all the qualified operators are temporarily not accessible?

Model Rule—Emission Limitations and Operating Limits

§60.3022
What emission limitations must I meet and by when?
§60.3023
What operating limits must I meet and by when?
§60.3024
What if I do not use a wet scrubber to comply with the emission limitations?
§60.3025
What happens during periods of startup, shutdown, and malfunction?

Model Rule—Performance Testing

§60.3027
How do I conduct the initial and annual performance test?
§60.3028
How are the performance test data used?

Model Rule—Initial Compliance Requirements

§60.3030
How do I demonstrate initial compliance with the emission limitations and establish the operating limits?
§60.3031
By what date must I conduct the initial performance test?

Model Rule—Continuous Compliance Requirements

§60.3033
How do I demonstrate continuous compliance with the emission limitations and the operating limits?
§60.3034
By what date must I conduct the annual performance test?
§60.3035
May I conduct performance testing less often?
§60.3036
May I conduct a repeat performance test to establish new operating limits?

Model Rule—Monitoring

§60.3038
What continuous emission monitoring systems must I install?
§60.3039
How do I make sure my continuous emission monitoring systems are operating correctly?
§60.3040
What is my schedule for evaluating continuous emission monitoring systems?
§60.3041
What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems, and is the data collection requirement enforceable?
§60.3042
How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?
§60.3043
What operating parameter monitoring equipment must I install, and what operating parameters must I monitor?
§60.3044
Is there a minimum amount of operating parameter monitoring data I must obtain?

Model Rule—Recordkeeping and Reporting

§60.3046
What records must I keep?
§60.3047
Where and in what format must I keep my records?
§60.3048
What reports must I submit?
§60.3049
What information must I submit following my initial performance test?
§60.3050
When must I submit my annual report?
§60.3051
What information must I include in my annual report?
§60.3052
What else must I report if I have a deviation from the operating limits or the emission limitations?
§60.3053
What must I include in the deviation report?
§60.3054
What else must I report if I have a deviation from the requirement to have a qualified operator accessible?
§60.3055
Are there any other notifications or reports that I must submit?
§60.3056
In what form can I submit my reports?
§60.3057
Can reporting dates be changed?

Model Rule—Title V Operating Permits

§60.3059
Am I required to apply for and obtain a title V operating permit for my unit?
§60.3060
When must I submit a title V permit application for my existing unit?

Model Rule—Temporary-Use Incinerators and Air Curtain Incinerators Used in Disaster Recovery

§60.3061
What are the requirements for temporary-use incinerators and air curtain incinerators used in disaster recovery?

Model Rule—Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste

§60.3062
What is an air curtain incinerator?
§60.3063
When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste?
§60.3064
What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it?
§60.3065
What must I do if I plan to permanently close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and not restart it?
§60.3066
What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
§60.3067
How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
§60.3068
What are the recordkeeping and reporting requirements for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
§60.3069
Am I required to apply for and obtain a title V operating permit for my air curtain incinerator that burns only wood waste, clean lumber, and yard waste?

Model Rule—Equations

§60.3076
What equations must I use?

Model Rule—Definitions

§60.3078
What definitions must I know?
Appendix
Table 1 to Subpart FFFF of Part 60—Model Rule—Compliance Schedule
Appendix
Table 2 to Subpart FFFF of Part 60—Model Rule—Emission Limitations
Appendix
Table 3 to Subpart FFFF of Part 60—Model Rule—Operating Limits for Incinerators and Wet Scrubbers
Appendix
Table 4 to Subpart FFFF of Part 60—Model Rule—Requirements for Continuous Emission Monitoring Systems (CEMS)
Appendix
Table 5 to Subpart FFFF of Part 60—Model Rule—Summary of Reporting Requirements
rule

Subparts GGGG-HHHH [Reserved]

rule

Subpart IIII—STANDARDS OF PERFORMANCE FOR STATIONARY COMPRESSION IGNITION INTERNAL COMBUSTION ENGINES

What This Subpart Covers

§60.4200
Am I subject to this subpart?

Emission Standards for Manufacturers

§60.4201
What emission standards must I meet for non-emergency engines if I am a stationary CI internal combustion engine manufacturer?
§60.4202
What emission standards must I meet for emergency engines if I am a stationary CI internal combustion engine manufacturer?
§60.4203
How long must my engines meet the emission standards if I am a manufacturer of stationary CI internal combustion engines?

Emission Standards for Owners and Operators

§60.4204
What emission standards must I meet for non-emergency engines if I am an owner or operator of a stationary CI internal combustion engine?
§60.4205
What emission standards must I meet for emergency engines if I am an owner or operator of a stationary CI internal combustion engine?
§60.4206
How long must I meet the emission standards if I am an owner or operator of a stationary CI internal combustion engine?

Fuel Requirements for Owners and Operators

§60.4207
What fuel requirements must I meet if I am an owner or operator of a stationary CI internal combustion engine subject to this subpart?

Other Requirements for Owners and Operators

§60.4208
What is the deadline for importing or installing stationary CI ICE produced in previous model years?
§60.4209
What are the monitoring requirements if I am an owner or operator of a stationary CI internal combustion engine?

Compliance Requirements

§60.4210
What are my compliance requirements if I am a stationary CI internal combustion engine manufacturer?
§60.4211
What are my compliance requirements if I am an owner or operator of a stationary CI internal combustion engine?

Testing Requirements for Owners and Operators

§60.4212
What test methods and other procedures must I use if I am an owner or operator of a stationary CI internal combustion engine with a displacement of less than 30 liters per cylinder?
§60.4213
What test methods and other procedures must I use if I am an owner or operator of a stationary CI internal combustion engine with a displacement of greater than or equal to 30 liters per cylinder?

Notification, Reports, and Records for Owners and Operators

§60.4214
What are my notification, reporting, and recordkeeping requirements if I am an owner or operator of a stationary CI internal combustion engine?

Special Requirements

§60.4215
What requirements must I meet for engines used in Guam, American Samoa, or the Commonwealth of the Northern Mariana Islands?
§60.4216
What requirements must I meet for engines used in Alaska?
§60.4217
What emission standards must I meet if I am an owner or operator of a stationary internal combustion engine using special fuels?

General Provisions

§60.4218
What parts of the General Provisions apply to me?
§60.4219
What definitions apply to this subpart?
Appendix
Table 1 to Subpart IIII of Part 60—Emission Standards for Stationary Pre-2007 Model Year Engines With a Displacement of <10 Liters per Cylinder and 2007-2010 Model Year Engines >2,237 KW (3,000 HP) and With a Displacement of <10 Liters per Cylinder
Appendix
Table 2 to Subpart IIII of Part 60—Emission Standards for 2008 Model Year and Later Emergency Stationary CI ICE <37 KW (50 HP) With a Displacement of <10 Liters per Cylinder
Appendix
Table 3 to Subpart IIII of Part 60—Certification Requirements for Stationary Fire Pump Engines
Appendix
Table 4 to Subpart IIII of Part 60—Emission Standards for Stationary Fire Pump Engines
Appendix
Table 5 to Subpart IIII of Part 60—Labeling and Recordkeeping Requirements for New Stationary Emergency Engines
Appendix
Table 6 to Subpart IIII of Part 60—Optional 3-Mode Test Cycle for Stationary Fire Pump Engines
Appendix
Table 7 to Subpart IIII of Part 60—Requirements for Performance Tests for Stationary CI ICE With a Displacement of ≥30 Liters per Cylinder
Appendix
Table 8 to Subpart IIII of Part 60—Applicability of General Provisions to Subpart IIII
rule

Subpart JJJJ—STANDARDS OF PERFORMANCE FOR STATIONARY SPARK IGNITION INTERNAL COMBUSTION ENGINES

What This Subpart Covers

§60.4230
Am I subject to this subpart?

Emission Standards for Manufacturers

§60.4231
What emission standards must I meet if I am a manufacturer of stationary SI internal combustion engines or equipment containing such engines?
§60.4232
How long must my engines meet the emission standards if I am a manufacturer of stationary SI internal combustion engines?

Emission Standards for Owners and Operators

§60.4233
What emission standards must I meet if I am an owner or operator of a stationary SI internal combustion engine?
§60.4234
How long must I meet the emission standards if I am an owner or operator of a stationary SI internal combustion engine?

Other Requirements for Owners and Operators

§60.4235
What fuel requirements must I meet if I am an owner or operator of a stationary SI gasoline fired internal combustion engine subject to this subpart?
§60.4236
What is the deadline for importing or installing stationary SI ICE produced in previous model years?
§60.4237
What are the monitoring requirements if I am an owner or operator of an emergency stationary SI internal combustion engine?

Compliance Requirements for Manufacturers

§60.4238
What are my compliance requirements if I am a manufacturer of stationary SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines?
§60.4239
What are my compliance requirements if I am a manufacturer of stationary SI internal combustion engines >19 KW (25 HP) that use gasoline or a manufacturer of equipment containing such engines?
§60.4240
What are my compliance requirements if I am a manufacturer of stationary SI internal combustion engines >19 KW (25 HP) that are rich burn engines that use LPG or a manufacturer of equipment containing such engines?
§60.4241
What are my compliance requirements if I am a manufacturer of stationary SI internal combustion engines participating in the voluntary certification program or a manufacturer of equipment containing such engines?
§60.4242
What other requirements must I meet if I am a manufacturer of stationary SI internal combustion engines or equipment containing stationary SI internal combustion engines or a manufacturer of equipment containing such engines?

Compliance Requirements for Owners and Operators

§60.4243
What are my compliance requirements if I am an owner or operator of a stationary SI internal combustion engine?

Testing Requirements for Owners and Operators

§60.4244
What test methods and other procedures must I use if I am an owner or operator of a stationary SI internal combustion engine?

Notification, Reports, and Records for Owners and Operators

§60.4245
What are my notification, reporting, and recordkeeping requirements if I am an owner or operator of a stationary SI internal combustion engine?

General Provisions

§60.4246
What parts of the General Provisions apply to me?

Mobile Source Provisions

§60.4247
What parts of the mobile source provisions apply to me if I am a manufacturer of stationary SI internal combustion engines or a manufacturer of equipment containing such engines?

Definitions

§60.4248
What definitions apply to this subpart?
Appendix
Table 1 to Subpart JJJJ of Part 60—NOX, CO, and VOC Emission Standards for Stationary Non-Emergency SI Engines 100 HP (Except Gasoline and Rich Burn LPG), Stationary SI Landfill/Digester Gas Engines, and Stationary Emergency Engines >25 HP
Appendix
Table 2 to Subpart JJJJ of Part 60—Requirements for Performance Tests
Appendix
Table 3 to Subpart JJJJ of Part 60—Applicability of General Provisions to Subpart JJJJ
Appendix
Table 4 to Subpart JJJJ of Part 60—Applicability of Mobile Source Provisions for Manufacturers Participating in the Voluntary Certification Program and Certifying Stationary SI ICE to Emission Standards in Table 1 of Subpart JJJJ
rule

Subpart KKKK—STANDARDS OF PERFORMANCE FOR STATIONARY COMBUSTION TURBINES

Introduction

§60.4300
What is the purpose of this subpart?

Applicability

§60.4305
Does this subpart apply to my stationary combustion turbine?
§60.4310
What types of operations are exempt from these standards of performance?

Emission Limits

§60.4315
What pollutants are regulated by this subpart?
§60.4320
What emission limits must I meet for nitrogen oxides (NOX)?
§60.4325
What emission limits must I meet for NOX if my turbine burns both natural gas and distillate oil (or some other combination of fuels)?
§60.4330
What emission limits must I meet for sulfur dioxide (SO2)?

General Compliance Requirements

§60.4333
What are my general requirements for complying with this subpart?

Monitoring

§60.4335
How do I demonstrate compliance for NOX if I use water or steam injection?
§60.4340
How do I demonstrate continuous compliance for NOX if I do not use water or steam injection?
§60.4345
What are the requirements for the continuous emission monitoring system equipment, if I choose to use this option?
§60.4350
How do I use data from the continuous emission monitoring equipment to identify excess emissions?
§60.4355
How do I establish and document a proper parameter monitoring plan?
§60.4360
How do I determine the total sulfur content of the turbine's combustion fuel?
§60.4365
How can I be exempted from monitoring the total sulfur content of the fuel?
§60.4370
How often must I determine the sulfur content of the fuel?

Reporting

§60.4375
What reports must I submit?
§60.4380
How are excess emissions and monitor downtime defined for NOX?
§60.4385
How are excess emissions and monitoring downtime defined for SO2?
§60.4390
What are my reporting requirements if I operate an emergency combustion turbine or a research and development turbine?
§60.4395
When must I submit my reports?

Performance Tests

§60.4400
How do I conduct the initial and subsequent performance tests, regarding NOX?
§60.4405
How do I perform the initial performance test if I have chosen to install a NOX-diluent CEMS?
§60.4410
How do I establish a valid parameter range if I have chosen to continuously monitor parameters?
§60.4415
How do I conduct the initial and subsequent performance tests for sulfur?

Definitions

§60.4420
What definitions apply to this subpart?
Appendix
Table 1 to Subpart KKKK of Part 60—Nitrogen Oxide Emission Limits for New Stationary Combustion Turbines
rule

Subpart LLLL—STANDARDS OF PERFORMANCE FOR NEW SEWAGE SLUDGE INCINERATION UNITS

Introduction

§60.4760
What does this subpart do?
§60.4765
When does this subpart become effective?

Applicability and Delegation of Authority

§60.4770
Does this subpart apply to my sewage sludge incineration unit?
§60.4775
What is a new sewage sludge incineration unit?
§60.4780
What sewage sludge incineration units are exempt from this subpart?
§60.4785
Who implements and enforces this subpart?
§60.4790
How are these new source performance standards structured?
§60.4795
Do all nine components of these new source performance standards apply at the same time?

Preconstruction Siting Analysis

§60.4800
Who must prepare a siting analysis?
§60.4805
What is a siting analysis?

Operator Training and Qualification

§60.4810
What are the operator training and qualification requirements?
§60.4815
When must the operator training course be completed?
§60.4820
How do I obtain my operator qualification?
§60.4825
How do I maintain my operator qualification?
§60.4830
How do I renew my lapsed operator qualification?
§60.4835
What if all the qualified operators are temporarily not accessible?
§60.4840
What site-specific documentation is required and how often must it be reviewed by qualified operators and plant personnel?

Emission Limits, Emission Standards, and Operating Limits and Requirements

§60.4845
What emission limits and standards must I meet and by when?
§60.4850
What operating limits and requirements must I meet and by when?
§60.4855
How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon injection, or if I limit emissions in some other manner, to comply with the emission limits?
§60.4860
Do the emission limits, emission standards, and operating limits apply during periods of startup, shutdown, and malfunction?
§60.4861
How do I establish an affirmative defense for exceedance of an emission limit or standard during malfunction?

Initial Compliance Requirements

§60.4865
How and when do I demonstrate initial compliance with the emission limits and standards?
§60.4870
How do I establish my operating limits?
§60.4875
By what date must I conduct the initial air pollution control device inspection and make any necessary repairs?
§60.4880
How do I develop a site-specific monitoring plan for my continuous monitoring, bag leak detection, and ash handling systems, and by what date must I conduct an initial performance evaluation?

Continuous Compliance Requirements

§60.4885
How and when do I demonstrate continuous compliance with the emission limits and standards?
§60.4890
How do I demonstrate continuous compliance with my operating limits?
§60.4895
By what date must I conduct annual air pollution control device inspections and make any necessary repairs?

Performance Testing, Monitoring, and Calibration Requirements

§60.4900
What are the performance testing, monitoring, and calibration requirements for compliance with the emission limits and standards?
§60.4905
What are the monitoring and calibration requirements for compliance with my operating limits?

Recordkeeping and Reporting

§60.4910
What records must I keep?
§60.4915
What reports must I submit?

Title V Operating Permits

§60.4920
Am I required to apply for and obtain a title V operating permit for my unit?
§60.4925
When must I submit a title V permit application for my new SSI unit?

Definitions

§60.4930
What definitions must I know?
Appendix
Table 1 to Subpart LLLL of Part 60—Emission Limits and Standards for New Fluidized Bed Sewage Sludge Incineration Units
Appendix
Table 2 to Subpart LLLL of Part 60—Emission Limits and Standards for New Multiple Hearth Sewage Sludge Incineration Units
Appendix
Table 3 to Subpart LLLL of Part 60—Operating Parameters for New Sewage Sludge Incineration Units
Appendix
Table 4 to Subpart LLLL of Part 60—Toxic Equivalency Factors
Appendix
Table 5 to Subpart LLLL of Part 60—Summary of Reporting Requirements for New Sewage Sludge Incineration Units
rule

Subpart MMMM—EMISSION GUIDELINES AND COMPLIANCE TIMES FOR EXISTING SEWAGE SLUDGE INCINERATION UNITS

Introduction

60.5000
60.5000   What is the purpose of this subpart?
§60.5005
Am I affected by this subpart?
§60.5010
Is a state plan required for all states?
§60.5015
What must I include in my state plan?
§60.5020
Is there an approval process for my state plan?
§60.5025
What if my state plan is not approvable?
§60.5030
Is there an approval process for a negative declaration letter?
§60.5035
What compliance schedule must I include in my state plan?
§60.5040
Are there any state plan requirements for this subpart that apply instead of the requirements specified in subpart B?
§60.5045
In lieu of a state plan submittal, are there other acceptable option(s) for a state to meet its section 111(d)/129 (b)(2) obligations?
§60.5050
What authorities will not be delegated to state, local, or tribal agencies?
§60.5055
Does this subpart directly affect SSI unit owners and operators in my state?

Applicability of State Plans

§60.5060
What SSI units must I address in my state plan?
§60.5065
What SSI units are exempt from my state plan?

Use of Model Rule

§60.5070
What is the “model rule” in this subpart?
§60.5075
How does the model rule relate to the required elements of my state plan?
§60.5080
What are the principal components of the model rule?

Model Rule—Increments of Progress

§60.5085
What are my requirements for meeting increments of progress and achieving final compliance?
§60.5090
When must I complete each increment of progress?
§60.5095
What must I include in the notifications of achievement of increments of progress?
§60.5100
When must I submit the notifications of achievement of increments of progress?
§60.5105
What if I do not meet an increment of progress?
§60.5110
How do I comply with the increment of progress for submittal of a control plan?
§60.5115
How do I comply with the increment of progress for achieving final compliance?
§60.5120
What must I do if I close my SSI unit and then restart it?
§60.5125
What must I do if I plan to permanently close my SSI unit and not restart it?

Model Rule—Operator Training and Qualification

§60.5130
What are the operator training and qualification requirements?
§60.5135
When must the operator training course be completed?
§60.5140
How do I obtain my operator qualification?
§60.5145
How do I maintain my operator qualification?
§60.5150
How do I renew my lapsed operator qualification?
§60.5155
What if all the qualified operators are temporarily not accessible?
§60.5160
What site-specific documentation is required and how often must it be reviewed by qualified operators and plant personnel?

Model Rule—Emission Limits, Emission Standards, and Operating Limits and Requirements

§60.5165
What emission limits and standards must I meet and by when?
§60.5170
What operating limits and requirements must I meet and by when?
§60.5175
How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic precipitator, activated carbon injection, or afterburner, or if I limit emissions in some other manner, to comply with the emission limits?
§60.5180
Do the emission limits, emission standards, and operating limits apply during periods of startup, shutdown, and malfunction?
§60.5181
How do I establish an affirmative defense for exceedance of an emission limit or standard during malfunction?

Model Rule—Initial Compliance Requirements

§60.5185
How and when do I demonstrate initial compliance with the emission limits and standards?
§60.5190
How do I establish my operating limits?
§60.5195
By what date must I conduct the initial air pollution control device inspection and make any necessary repairs?
§60.5200
How do I develop a site-specific monitoring plan for my continuous monitoring, bag leak detection, and ash handling systems, and by what date must I conduct an initial performance evaluation?

Model Rule—Continuous Compliance Requirements

§60.5205
How and when do I demonstrate continuous compliance with the emission limits and standards?
§60.5210
How do I demonstrate continuous compliance with my operating limits?
§60.5215
By what date must I conduct annual air pollution control device inspections and make any necessary repairs?

Model Rule—Performance Testing, Monitoring, and Calibration Requirements

§60.5220
What are the performance testing, monitoring, and calibration requirements for compliance with the emission limits and standards?
§60.5225
What are the monitoring and calibration requirements for compliance with my operating limits?

Model Rule—Recordkeeping and Reporting

§60.5230
What records must I keep?
§60.5235
What reports must I submit?

Model Rule—Title V Operating Permits

§60.5240
Am I required to apply for and obtain a Title V operating permit for my existing SSI unit?
§60.5245
When must I submit a title V permit application for my existing SSI unit?

Model Rule-Definitions

§60.5250
What definitions must I know?
Appendix
Table 1 to Subpart MMMM of Part 60—Model Rule—Increments of Progress and Compliance Schedules for Existing Sewage Sludge Incineration Units
Appendix
Table 2 to Subpart MMMM of Part 60—Model Rule—Emission Limits and Standards for Existing Fluidized Bed Sewage Sludge Incineration Units
Appendix
Table 3 to Subpart MMMM of Part 60—Model Rule—Emission Limits and Standards for Existing Multiple Hearth Sewage Sludge Incineration Units
Appendix
Table 4 to Subpart MMMM of Part 60—Model Rule—Operating Parameters for Existing Sewage Sludge Incineration Units
Appendix
Table 5 to Subpart MMMM of Part 60—Model Rule—Toxic Equivalency Factors
Appendix
Table 6 to Subpart MMMM of Part 60—Model Rule—Summary of Reporting Requirements for Existing Sewage Sludge Incineration Units
rule

Subpart OOOO—STANDARDS OF PERFORMANCE FOR CRUDE OIL AND NATURAL GAS PRODUCTION, TRANSMISSION AND DISTRIBUTION

§60.5360
What is the purpose of this subpart?
§60.5365
Am I subject to this subpart?
§60.5370
When must I comply with this subpart?
§60.5375
What standards apply to gas well affected facilities?
§60.5380
What standards apply to centrifugal compressor affected facilities?
§60.5385
What standards apply to reciprocating compressor affected facilities?
§60.5390
What standards apply to pneumatic controller affected facilities?
§60.5395
What standards apply to storage vessel affected facilities?
§60.5400
What equipment leak standards apply to affected facilities at an onshore natural gas processing plant?
§60.5401
What are the exceptions to the equipment leak standards for affected facilities at onshore natural gas processing plants?
§60.5402
What are the alternative emission limitations for equipment leaks from onshore natural gas processing plants?
§60.5405
What standards apply to sweetening units at onshore natural gas processing plants?
§60.5406
What test methods and procedures must I use for my sweetening units affected facilities at onshore natural gas processing plants?
§60.5407
What are the requirements for monitoring of emissions and operations from my sweetening unit affected facilities at onshore natural gas processing plants?
§60.5408
What is an optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure?
§60.5410
How do I demonstrate initial compliance with the standards for my gas well affected facility, my centrifugal compressor affected facility, my reciprocating compressor affected facility, my pneumatic controller affected facility, my storage vessel affected facility, and my equipment leaks and sweetening unit affected facilities at onshore natural gas processing plants?
§60.5411
What additional requirements must I meet to determine initial compliance for my covers and closed vent systems routing materials from storage vessels and centrifugal compressor wet seal degassing systems?
§60.5412
What additional requirements must I meet for determining initial compliance with control devices used to comply with the emission standards for my storage vessel or centrifugal compressor affected facility?
§60.5413
What are the performance testing procedures for control devices used to demonstrate compliance at my storage vessel or centrifugal compressor affected facility?
§60.5415
How do I demonstrate continuous compliance with the standards for my gas well affected facility, my centrifugal compressor affected facility, my stationary reciprocating compressor affected facility, my pneumatic controller affected facility, my storage vessel affected facility, and my affected facilities at onshore natural gas processing plants?
§60.5416
What are the initial and continuous cover and closed vent system inspection and monitoring requirements for my storage vessel and centrifugal compressor affected facility?
§60.5417
What are the continuous control device monitoring requirements for my storage vessel or centrifugal compressor affected facility?
§60.5420
What are my notification, reporting, and recordkeeping requirements?
§60.5421
What are my additional recordkeeping requirements for my affected facility subject to VOC requirements for onshore natural gas processing plants?
§60.5422
What are my additional reporting requirements for my affected facility subject to VOC requirements for onshore natural gas processing plants?
§60.5423
What additional recordkeeping and reporting requirements apply to my sweetening unit affected facilities at onshore natural gas processing plants?
§60.5425
What part of the General Provisions apply to me?
§60.5430
What definitions apply to this subpart?
§§60.5431-60.5499
[Reserved]
Appendix
Table 1 to Subpart OOOO of Part 60—Required Minimum Initial SO2 Emission Reduction Efficiency (Zi)
Appendix
Table 2 to Subpart OOOO of Part 60—Required Minimum SO2 Emission Reduction Efficiency (Zc)
Appendix
Table 3 to Subpart OOOO of Part 60—Applicability of General Provisions to Subpart OOOO


For questions or comments regarding e-CFR editorial content, features, or design, email ecfr@nara.gov.
For questions concerning e-CFR programming and delivery issues, email webteam@gpo.gov.