About GPO   |   Newsroom/Media   |   Congressional Relations   |   Inspector General   |   Careers   |   Contact   |   askGPO   |   Help  
 
Home   |   Customers   |   Vendors   |   Libraries  

The Electronic Code of Federal Regulations (e-CFR) is a regularly updated, unofficial editorial compilation of CFR material and Federal Register amendments produced by the National Archives and Records Administration's Office of the Federal Register (OFR) and the Government Printing Office.

Parallel Table of Authorities and Rules for the Code of Federal Regulations and the United States Code
Text | PDF

Find, review, and submit comments on Federal rules that are open for comment and published in the Federal Register using Regulations.gov.

Purchase individual CFR titles from the U.S. Government Online Bookstore.

Find issues of the CFR (including issues prior to 1996) at a local Federal depository library.

[1]
 
 

Electronic Code of Federal Regulations

blue pill

e-CFR Data is current as of August 28, 2014

Title 16Chapter IISubchapter DPart 1633


TITLE 16—Commercial Practices

CHAPTER II—CONSUMER PRODUCT SAFETY COMMISSION

SUBCHAPTER D—FLAMMABLE FABRICS ACT REGULATIONS

PART 1633—STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS

rule

Subpart A—THE STANDARD

§1633.1
Purpose, scope and applicability.
§1633.2
Definitions.
§1633.3
General requirements.
§1633.4
Prototype testing requirements.
§1633.5
Prototype pooling and confirmation testing requirements.
§1633.6
Quality assurance requirements.
§1633.7
Mattress test procedure.
§1633.8
Findings.
§1633.9
Glossary of terms.
rule

Subpart B—RULES AND REGULATIONS

§1633.10
Definitions.
§1633.11
Records.
§1633.12
Labeling.
§1633.13
Tests for guaranty purposes, compliance with this section, and “one of a kind” exemption.
Appendix
Figure 1 to Part 1633—Test Assembly, Shown in Furniture Calorimeter (Configuration A)
Appendix
Figure 2 to Part 1633—Test Arrangement in 3.05m × 3.66m (10 ft × 12 ft) Room (Configuration B)
Appendix
Figure 3 to Part 1633—Details of Horizontal Burner Head
Appendix
Figure 4 to Part 1633—Details of Vertical Burner Head
Appendix
Figure 5 to Part 1633—Details of Burner Stand-off
Appendix
Figure 6 to Part 1633—Burner Assembly Showing Arms and Pivots (Shoulder Screws), in Relation to, Portable Frame Allowing Burner Height Adjustment
Appendix
Figure 7 to Part 1633—Elements of Propane Flow Control for Each Burner
Appendix
Figure 8 to Part 1633—Jig for Setting Mattresses and Foundation Sides in Same Plane
Appendix
Figure 9 to Part 1633—Burner Placements on Mattress/Foundation
Appendix
Figure 10 to Part 1633—Jig for Setting Burners at Proper Distances From Mattress/Foundation
Appendix
Figure 11 to Part 1633—Diagrams for Glossary of Terms
Appendix
Figure 12 to Part 1633—Labels for Domestic Mattress With Foundation
Appendix
Figure 13 to Part 1633—Labels for Imported Mattress With Foundation
Appendix
Figures 14 and 15 to Part 1633—Label for Domestic Mattress Alone and with Foundation and Label for Imported Mattress Alone and With Foundation
Appendix
Figures 16 and 17 to Part 1633—Label for Domestic Mattress Only and Label for Imported Mattress Only


For questions or comments regarding e-CFR editorial content, features, or design, email ecfr@nara.gov.
For questions concerning e-CFR programming and delivery issues, email webteam@gpo.gov.