About GPO   |   Newsroom/Media   |   Congressional Relations   |   Inspector General   |   Careers   |   Contact   |   askGPO   |   Help  
 
Home   |   Customers   |   Vendors   |   Libraries  
The Code of Federal Regulations (CFR) annual edition is the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government produced by the Office of the Federal Register (OFR) and the Government Publishing Office.


Parallel Table of Authorities and Rules for the Code of Federal Regulations and the United States Code
Text | PDF

Find, review, and submit comments on Federal rules that are open for comment and published in the Federal Register using Regulations.gov.

Purchase individual CFR titles from the U.S. Government Online Bookstore.

Find issues of the CFR (including issues prior to 1996) at a local Federal depository library.

[1]
 
 

Electronic Code of Federal Regulations

e-CFR data is current as of April 30, 2015

Title 27Chapter IISubchapter BPart 478Subpart C → §478.39


Title 27: Alcohol, Tobacco Products and Firearms
PART 478—COMMERCE IN FIREARMS AND AMMUNITION
Subpart C—Administrative and Miscellaneous Provisions


§478.39   Assembly of semiautomatic rifles or shotguns.

(a) No person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph (c) of this section if the assembled firearm is prohibited from importation under section 925(d)(3) as not being particularly suitable for or readily adaptable to sporting purposes.

(b) The provisions of this section shall not apply to:

(1) The assembly of such rifle or shotgun for sale or distribution by a licensed manufacturer to the United States or any department or agency thereof or to any State or any department, agency, or political subdivision thereof; or

(2) The assembly of such rifle or shotgun for the purposes of testing or experimentation authorized by the Director under the provisions of §478.151; or

(3) The repair of any rifle or shotgun which had been imported into or assembled in the United States prior to November 30, 1990, or the replacement of any part of such firearm.

(c) For purposes of this section, the term imported parts are:

(1) Frames, receivers, receiver castings, forgings or stampings

(2) Barrels

(3) Barrel extensions

(4) Mounting blocks (trunions)

(5) Muzzle attachments

(6) Bolts

(7) Bolt carriers

(8) Operating rods

(9) Gas pistons

(10) Trigger housings

(11) Triggers

(12) Hammers

(13) Sears

(14) Disconnectors

(15) Buttstocks

(16) Pistol grips

(17) Forearms, handguards

(18) Magazine bodies

(19) Followers

(20) Floorplates

[T.D. ATF-346, 58 FR 40589, July 29, 1993]


Need assistance?