Download the Code of Federal Regulations in XML.
The Electronic Code of Federal Regulations (e-CFR) is a regularly updated, unofficial editorial compilation of CFR material and Federal Register amendments produced by the National Archives and Records Administration's Office of the Federal Register (OFR) and the Government Publishing Office.
Parallel Table of Authorities and Rules for the Code of Federal Regulations and the United States Code
Text | PDF
Find, review, and submit comments on Federal rules that are open for comment and published in the Federal Register using Regulations.gov.
Purchase individual CFR titles from the U.S. Government Online Bookstore.
Find issues of the CFR (including issues prior to 1996) at a local Federal depository library.
Electronic Code of Federal Regulations
Title 16: Commercial Practices
§1221.2 Requirements for play yards.
(a) Except as provided in paragraph (b) of this section, each play yard must comply with all applicable provisions of ASTM F406-13, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, approved on May 1, 2013. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR Part 51. You may obtain a copy from ASTM International, 100 Bar Harbor Drive, P.O. Box 0700, West Conshohocken, PA 19428; http://www.astm.org. You may inspect a copy at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to:http://www.archives.gov/federal_register/code_of_federal regulations/ibr_locations.html.
(b) Comply with the ASTM F406-13 standard with the following exclusions:
(1) Do not comply with section 5.17 of ASTM F406-13.
(2) Do not comply with section 5.20 of ASTM F406-13.
(3) Do not comply with section 6, Performance Requirements for Rigid-Sided Products, of ASTM F406-13, in its entirety.
(4) Do not comply with sections 8.1 through 8.10.5 of ASTM F406-13.
(5) Instead of complying with section 18.104.22.168 of ASTM F406-13, comply only with the following:
(i) 22.214.171.124 For products that have a separate mattress that is not permanently fixed in place: Use ONLY mattress/pad provided by manufacturer.
(6) Do not comply with section 10.1.1.1 of ASTM F406-13.
[78 FR 50335, Aug. 19, 2013]